Manual Funai TD6D-D4413DB (page 78 of 84) (English)

503725

Zoom out

Zoom in

1/84

Symptom Remedy

GENERAL

No image from HDMI connection. • Check the HDMI connection. (Check the status of the HDMI related indications.)

• Check whether the connected monitor device or other device supports HDCP.

(This unit will not output a video signal unless the other device supports HDCP.)

• Check the setting of HDMI.

• Check whether the output format of this unit (HDMI FORMAT) matches the

supported input format of other connected device.

• If the unit is connected to the unauthorised display device with an HDMI cable,

the audio and video signals may not be output when playing back a commercial

DVD-video.

CHANNEL

TV channels cannot be changed. • Check if the connections are made securely and correctly.

• Check if the cables are damaged.

• Try “Channel” setting by following the steps on pages 21-23.

Some settings are lost even though you

followed the procedure correctly.

• If you unplug the AC mains cable while the warning message, “Saving settings.

Please wait.”, is displayed, some settings may be lost. Do not unplug the AC

mains cable while the message is displayed (It will take about 1 minute.).

Only specific channels do not appear. • The channels may be set to be skipped. (See pages 22, 25.)

Though auto tuning was completed,

you cannot watch the DVB and

analogue channels.

• Confirm whether an antenna cable is connected correctly and try to tune again.

(See pages 21-23.)

• If you move the unit to a different area, you will need to perform auto tuning

again.

The TV channel which you have been

able to watch before has disappeared

and “No signal” is displayed.

RECORDING

GENERAL

The image from the external device

cannot be displayed.

• Try pressing [INPUT SELECT] repeatedly to select the external input channel,

then press [PROG. G\H] repeatedly to select your desired channel.

• Turn on all connected devices.

• Check if the connections are made securely and correctly.

HDD / DVD

Recording is impossible. • It is prohibited to make a recording from 2 minutes before the programmed start

time of a timer recording.

• This unit cannot record programmes that contain copy protection signal. This is

not a malfunction.

• The space of the recording media may be used up. Try deleting unnecessary

titles, or exchange it with the recordable media.

• The maximum number of titles or chapters has exceeded. Delete the

unnecessary titles to make enough space or insert a new recordable media.

• Check if the connections are made securely and correctly.

Timer recording cannot be

performed.

• The internal clock of the unit may have been stopped due to a power failure that

lasted for more than 30 seconds. Reset the clock. (See page 71.)

DVD

Recording is impossible. • Check if the disc is CPRM compatible. Copy-once programmes can only be

copied onto the disc which is CPRM compatible.

• Check if the disc is protected or finalised. Undo the protection or the finalisation.

• Video mode DVD-RW once formatted in other unit cannot be recorded in this

unit unless formatted in this unit.

• Check if the connections are made securely and correctly.

“Repairing” appears on the TV

screen.

• If there is a power failure or unplugging during recording, finalising, formatting or

editing (even after “Repairing” disappears), a repairing process will begin

automatically just after turning the unit on again.

• It may take several minutes up to about several hours.

In a case you intend to cancel the

repairing process.

• If you intend to cancel the repairing process, press [OPEN\CLOSE A] on the

front panel, then select “Yes” and press [ENTER\OK]. After that, press

[OPEN\CLOSE EJECT A] to take out the disc. The disc cancelled during the

repairing process MAY NOT work.

The indication

“”

does not disappear.

• “ ” may remain on screen for the maximum of

20 seconds even after it reached 100%. This is not a malfunction.

VCR

Recording does not start

immediately after pressing [REC].

• Make sure the videotape has a recorded tab when you record to a videotape. If

needed, cover the hole with cellophane tape.

Repairing

Do you want to cancel a repairing

process? When selecting “Yes”,

the disc may not be usable.

Yes

Repairing

100%Writing to Disc

90_Others.fm Page 78 Wednesday, April 14, 2010 9:15 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Funai TD6D-D4413DB in the language / languages: English as an attachment in your email.

The manual is 4,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Funai TD6D-D4413DB

Funai TD6D-D4413DB User Manual - German - 88 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Funai TD6D-D4413DB Manual

Product: