503770
24
Zoom out
Zoom in
Previous page
1/30
Next page
EN
24
This unit is equipped with a C.I. slot. You can enjoy additional
services with this function, for example Pay TV. The access
restrictions menu will appear on the TV screen when a CI
module is installed.
1 Turn off the unit and unplug from an AC outlet.
2 Insert the CI module straight to the C.I. slot of this unit.
Some CI modules may be a two-piece design consisting of
a card reader with the viewing card. When using this kind of
card, insert the card reader firmly into the C.I. slot on the
unit first. Then, insert the viewing card into the reader.
3 Plug this unit into an AC outlet and press Q to turn on
the unit.
4 Press MENU to display the menu.
5 Press K / L to select [OTHERS], then press OK.
6 Press K / L to select [DTV Settings], then press OK.
7 Press K / L to select [Common Interface], then press
OK.
8 Follow the instructions on the TV screen.
You can adjust the PC screen position, clock and phase.
Before you begin: You must connect your PC to this unit and
select [PC] at “Switching the Input Mode” (p. 12).
1 Press MENU to display the menu.
2 Press K / L to select [OTHERS], then press OK.
3 Press K / L to select [PC Settings], then press OK.
Auto Adjustment
4 Press K / L to select [Auto Adjustment], then press
OK.
• Auto Adjust Confirmation message will appear.
5 Press K / L to select [Adjust], then press OK.
• Each setting will be adjusted automatically.
6 Press MENU to exit.
Horizontal Position / Vertical Position / Clock / Phase
4 Press K / L to select the item you want, then press
OK.
5 Press 0 / 1 to adjust, then press OK.
6 Press MENU to exit.
C.I. (Common Interface)
Note:
In case of failure, you need to call your CI service provider.
Menu operations may vary depending on the viewing card. Refer
to the manual accompanying the viewing card.
DTV
26”
32”
PC Settings
Note:
Press K / L to change the items.
0 (cursor) 1 (cursor)
Horizontal Position
move PC
screen left
move PC
screen right
Vertical Position
move PC
screen down
move PC
screen up
Clock
decrease
setting value
increase
setting value
Phase
0
0
0
0
PC Settings
PICTURE
SOUND
CHANNEL
OTHERS
LANGUAGE
Auto Adjustment
Horizontal Position
Vertical Position
Clock
Phase
PC Settings
OK
0
+-
Adjust Move OK
H.Position
OK
0
+-
Adjust Move OK
V.Position
OK
0
Clock
Adjust Move OK
OK
30
Phase
Adjust Move OK
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Funai LT840-M26 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Funai LT840-M26 in the language / languages: English as an attachment in your email.

The manual is 2,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info