503766
4
Zoom out
Zoom in
Previous page
1/28
Next page
5
EN
THINGS TO DO FOR THE FIRST TIME
Attaching the Base
You must attach the base to the unit to have it as a table top unit.
Be sure the front and rear of the base match the proper direction.
To remove the base from this unit
Unscrew the Phillips pan screws on step 3. After the screws
are removed, move the base in the opposite direction as
shown by arrow B on step 2, then pull the base up toward
the front of the unit. Be careful not to drop the base when
you remove it.
Fixing the Unit on Your Furniture
Screw this unit on your furniture tightly using wood screws
(not supplied) in the 2 holes at the back of the base as shown.
Recommended screw dimension : 5.1 x 20 mm
1)
Spread a thick
and soft cloth
over a table as
shown.
Place the main
unit face up onto
it.
Make sure not to
damage the
screen.
At least 2 people
are required for
this step.
2) Insert 2 hooks
under the
bottom of the
main unit into
base holes.
(shown by arrow
A), then move
the base in the
direction as
shown by arrow
B until it stops
and the 6
mounting holes
are aligned.
3) Drive Phillips
pan screws into
the 6 threaded
holes at the
bottom of the
base until they
are tight.
Note:
• When attaching the base, ensure that all screws are
tightly fastened. If the base is not properly attached, it
could cause the unit to fall, resulting in injuries as well
as damage to the unit.
Make sure to use the table which can support the weight
of this unit and is larger than this unit.
• Make sure the table is in a stable location.
• When attaching the base, ensure that FRONT
written on the base is upward. If it's not upward, the 2
hooks don't fit in the base.
Note:
When you remove this unit make sure to unscrew the
wood screws from your Wood Stand, Furniture and other
wood item.
screw holes
screw holes
Rear of this unit
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Funai LT8-M40BB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Funai LT8-M40BB in the language / languages: English as an attachment in your email.

The manual is 3,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info