503764
8
Zoom out
Zoom in
Previous page
1/30
Next page
EN
8
PREPARATION FOR USE
Before you connect...
Be sure your antenna or other device is connected properly
before plugging in the AC power cord.
1 Connect an RF cable to (aerial) Input jack at the
rear of this unit.
2 Plug this unit into an AC outlet.
3 Turns on the main power switch.
4 When the STAND BY / POWER indicator on the front
panel lights red, then press Q to turn on the unit.
HDMI connection
HDMI connection offers the highest picture quality. HDMI
(High-Definition Multimedia Interface) transports high
definition video and multi-channel digital audio through a
single cable.
Connect the HDMI output jack of your video device and the
HDMI (HDMI 1 / HDMI 2 / HDMI 3) Input jack of this unit.
Use an HDMI cable.
Scart connection
Scart connection offers better picture quality.
Connect the scart jack of your video device and the Scart
(Scart 1 / Scart 2) jack of this unit. Use a scart cable.
No supplied cables are used with these connections:
Please purchase the necessary cables at your local store.
High Speed HDMI cable (also known as HDMI category 2 cable) is recommended for the better compatibility.
Antenna Connection
Note:
If you like to connect an active DVB-T antenna, the antenna must
have its own power supply.
It is not possible to power the antenna from the TV.
Your TV
VHF/UHF
MIXER
VHFUHF
External Connection
Dear Customer,
By connecting an HDMI cable to your Funai LCD TV, you
have to use only a certified HDMI cable to guarantee a
sufficient immunity against parasitic frequency radiation.
A certified HDMI cable can be identified by the HDMI logo
on the cable or the cable package.
Note:
This unit accepts 480i / 480p / 576i / 576p / 720p / 1080i / 1080p
video signals and 32 kHz / 44.1 kHz / 48 kHz audio signals for
HDMI connection.
• This unit accepts only 2 channel audio signals (LPCM).
• You need to select “PCM” for the digital audio output of the
device you connect. Make sure the device outputs the digital
audio. Audio sometimes makes no sound if you select
“Bitstream”, etc.
Connector
INPUT OUTPUT
S-Video
Audio
(L/R)
CVBS RGB
Video and
Audio (L/R)
Scart 1 Yes Yes Yes Yes
Outputs the
RF input signal
converted as
CVBS signal.
Scart 2 Yes Yes Yes No
output you can
choose
Your TV
Your device
Your TV
Your device
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Funai LH840-M26 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Funai LH840-M26 in the language / languages: English as an attachment in your email.

The manual is 3,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info