503553
7
Zoom out
Zoom in
Previous page
1/26
Next page
PC Connection
PC-IN
AUDIO
LINE OUT
PC-IN
AUDIO
RGB
Mini-plug audio cable
VGA cable
with ferrite
core
Your TV
Your device
The following signals can be displayed.
Format Resolution Refresh rate
VGA 640 × 480
60 Hz
SVGA 800 × 600
XGA 1,024 × 768
WXGA 1,360 × 768
WXGA+ 1,440 × 900
SXGA 1,280 × 1,024
SXGA+ 1,400 × 1,050
WSXGA+ 1,680 × 1,050
HDTV 1,920 × 1,080
Other formats or non-standard signals will not be displayed
correctly.
Please use the VGA cable that has a ferrite core.
Plug In the AC Power Cord
Make sure that the AC power cord must be plugged to an
AC outlet after all the necessary connections are completed.
Your TV
AC outlet
Initial Setup
This section will guide you through the unit’s initial setting
which includes selecting a language for your on-screen menu
and auto scan, which automatically scans and memorises
viewable channels.
1
After making all the necessary connections, turn on the
unit using the main power switch, then press Q.
2
Use K / L repeatedly to select the menu language,
then press OK.
Initial Setup
OK
Initial Setup
Language
Language
Please select your language.
Български
Česky
Dansk
Deutsch
Eesti
Ελληνικά
English
Select Exit
3
Use K / L to select the location, then press OK.
Select [at Home], this unit is set to maximise the energy efficiency
for home setting and it can be adjusted through a choice of picture
and sound quality according to your preference.
Select [Retailstore], this unit will be set up with predefined setting
for retail displays. If you select [Retailstore], the settings of picture
and sound quality you adjusted will not be memorised after the unit
goes into standby mode.
When “Initial Setup” (p. 7) is completed, you cannot change the
location setting unless you restore this unit to “Factory Reset”
(p. 20) and that restarts all over again such as channel scanning.
4
Use K / L repeatedly to select the country, then press
OK.
Scan confirmation menu will appear.
You can also set regions at “Region” (p. 18), when you select
[Spain] or [Portugal].
5
When below display appear use
K
/
L
to select [Scan],
then press OK to start scanning.
0%
OK
Exit
Select
Back
Skip
Scan
If you skip this step, the channel
scan could be performed in Menu.
Start channel scan now?
First, please connect antenna.
Auto Scan
Auto Scan
Initial Setup
Initial Setup
If you press MENU during channel scanning, this operation will be
paused, then press MENU again get away the initial setup.
EN
7
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Funai LED24H9223M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Funai LED24H9223M in the language / languages: English as an attachment in your email.

The manual is 1,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Funai LED24H9223M

Funai LED24H9223M User Manual - German - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info