503544

Funai LED19H820 Manual

14
Zoom out
Zoom in
Previous page
1/26
Next page
EN
14
Channel Skip
When using / , the channel you selected will be
skipped.
4 Use K / L to select [Skip], then press OK.
• will appear on the right of the channel.
Channel Delete
The channel you selected will be deleted from the channel
list.
4 Use K / L to select [Delete], then press OK.
• Delete confirmation message will appear.
5 Use K / L to select [Delete], then press OK.
Channel Lock
You can set particular channels to be invisible.
4 Use K / L to select [Lock], then press OK.
5 Use the Number buttons to enter the 4-digit
PIN Code you set.
• will appear on the right of the channel.
Channel Move Up / Move Down
You can change the channel order.
4 Use K / L to select [Move Up] or [Move Down], then
press OK.
Channel Decode
Some TV stations transmit encoded TV signals which can only
be viewed with a purchased or hired decoder. You can
connect such a decoder to SCART jack of the unit. This
function will automatically activate the connected decoder for
the channel.
4 Use K / L to select [Decoder], then press OK.
• will appear on the right of the channel.
Channel Scan
You can scan the channel in your area automatically or search
and store channels manually.
1 Use K / L to select [CHANNEL], then press OK.
Auto Scan
2 Use K / L to select [Auto Scan], then press OK.
• Auto scan confirmation message will appear.
3 Use K / L to select [Start], then press OK.
• Channel scanning will start.
Manual Scan
2 Use K / L to select [Manual Scan], then press OK.
3 Use K / L or the Number buttons to select the
channel number you want to scan, then press OK.
• Channel scanning will start.
3 Use K / L to select [Channel], then press OK.
4 Use K / L or the Number buttons to select the
channel number you want, then press OK.
5 Use K / L to select [Frequency], then press OK.
6 Use the Number buttons to select the 3-digit
frequency, then use K / L to start scanning.
7 After channel scanning is completed, press OK to select
the following settings. ([Colour System],
[Sound System], and [Fine Tune])
• Press OK again to cancel, and will disappear.
• When you select the locked channel, you need to enter the PIN
Code to watch.
• If you want to unlock the locked channel, select [Lock] by using
K / L, then the PIN Code again.
• When your country selection is [France], [Portugal], [Italy],
[Hungary], [Estonia], or [Latvia] at “Initial Setup” (p. 7), and you
select DTV channel, the channel order will be changed. If ATV
channels or any other countries, the channel number will be
switched.
• Press OK again to cancel, and will disappear.
ATV
• Digital or analogue channels will be scanned depending on the TV
mode (ATV mode or DTV mode) you selected.
• When the scanning is completed, the lowest memorised digital or
analogue channel will be displayed.
• If you press MENU during the scanning, this operation will be
stopped and the lowest memorised channel will be displayed.
• Please note that after tuning, the analogue channels will be stored
in the order that they are broadcast by your local transmitter.
This may not be in the same order in which you would like them
to be stored. If this is the case, you can change the order according
to your preference at “Channel Settings” (p. 13).
DTV
ATV
1
666
L
Manual Scan
Manual Scan
Channel
Frequency
Frequency
Colour System
Sound System
Fine Tune
MHz
SECAM
Search Back
PICTURE
SOUND
CHANNEL
OTHERS
LANGUAGE
USB
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Funai LED19H820 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Funai LED19H820 in the language / languages: English as an attachment in your email.

The manual is 0,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Funai LED19H820

Funai LED19H820 User Manual - German - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info