503747
6
Zoom out
Zoom in
Previous page
1/16
Next page
6 EN
PREPARATION FOR USE
Antenna Connection
1)
Insert the RF cable plug into the Aerial input jack at the
back of this unit.
2) Plug this unit into an AC outlet.
3) The STANDBY/POWER indicator on the front panel lights
red, then press
STANDBY-ON on the control panel or the
remote control to turn the unit on.
PROG. (+/
-
or / ) can also be used to turn the unit on.
External Connection
[HDMI CONNECTION]
This is the best method to connect this TV to video devices with
the HDMI output jack, such as DVD player with HDMI output
jack, etc. It can minimize the deterioration of image quality.
Use the HDMI cable (commercially available) for connection.
Connect the HDMI output jack of your video device to the
HDMI input jack of this unit.
Note:
This TV accepts 480i / 480p / 576i / 576p / 720p (50 Hz) /
720p (60 Hz) / 1080i (50 Hz) / 1080i (60 Hz) video
signals, and 32 kHz / 44.1 kHz / 48 kHz audio signals.
This TV accepts only 2 channel audio signals (LPCM).
You need to select “PCM” for the digital audio output of
the device you connect or the HDMI audio setting.
Audio sometimes makes no sound if you select
“Bitstream”, etc.
<When your video device has the DVI output jack…>
1) Connect the DVI output jack of your video device to the
HDMI input jack of this unit. Use the HDMI cable
(commercially available).
2) Connect the audio output jacks of your video device to the
HDMI AUDIO input jacks of the unit.
Note:
This TV accepts 480i / 480p / 576i / 576p / 720p (50 Hz) /
720p (60 Hz) / 1080i (50 Hz) / 1080i (60 Hz) video
signals.
Audio signals are converted to an analogue signal from
the digital if you make a connection above.
VHF/UHF
MIXER
VHF
UHF
To Aerial input jack
Rear of this TV
RF cable (not supplied)
AUDIO
HDMI IN
R
L
HDMI
HDMI OUT
Rear of this TV
To HDMI input jack
To HDMI output jack
HDMI cable (not supplied)
“HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.”
The “HD ready” Logo is a trademark of EICTA.
AUDIO
HDMI IN
R
L
HDMI
DVI OUT
AUDIO OUT
RL
Rear of this TV
HDMI cable (not supplied)
To audio
output jacks
To HDMI input jack
To HDMI AUDIO
input jacks
audio cable (not supplied)
To DVI output jack
L5950EA(EN).fm Page 6 Friday, March 30, 2007 2:46 PM
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Funai LCD-D2726 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Funai LCD-D2726 in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info