503740
11
Zoom out
Zoom in
Previous page
1/16
Next page
11 EN
OPERATIONS
Watching a TV Programme
1)
Press STANDBY-ON to turn on the TV.
2) Select the desired channel with / (prog.) or
the Number buttons.
Enter a channel number as two digits within 2.5 seconds for
the quickest results. For example, to select channel 6, press
0 and 6. If you only press 6, channel 6 will be selected after
2.5 seconds.
You can only select channels 1–99.
3) Adjust the volume to the desired listening level using
VOL. +/
-
on the control panel or +/
-
(vol.) on the remote
control.
If you want to mute the sound temporarily (e.g. during a
telephone call), press
(mute) on the remote control.
When you press
(mute) again, the sound will return at
its original volume level.
4) Adjust picture controls for a natural looking image.
(See “Picture Adjustment”.)
External Input Mode
When you connect external devices including DVD player, DVD
recorder and home audio system, you can easily switch the input
mode by using
INPUT SELECT.
Each time you Press
INPUT SELECT, TV screen will change as
below.
To use the HDMI input jack on the TV, select “HDMI”.
To use the SCART1 input jack on the TV, select “SCART1”.
To use the SCART2 input jack on the TV, select “SCART2”.
To use the COMPONENT input jack on the TV, select
“YPbPr”.
To use the VIDEO or S-VIDEO input jack on the TV, select
“VIDEO”.
Note: • When you use the S-VIDEO connection, S-VIDEO
input jack is given priority over the VIDEO input jack.
TV Colour System Change
Different countries use different television colour systems. You
can change the system by pressing
COLOR SYSTEM.
When you select “AUTO” by pressing
COLOR SYSTEM, this
unit will distinguish the system automatically according to the
input signal from the tuner or external devices.
If the picture on the TV screen is black and white, select the
system manually by using
COLOR SYSTEM. Each time you press
COLOR SYSTEM, TV screen will change as follows.
(LCD-A2706 / LCD-A3206 / LCD-A3207 / LCD-B2706 /
LCD-B3206 / LCD-D2706 / LCD-D2707 / LCD-D2717 /
LCD-D3206 / LCD-D3207 / LCD-A2726 / LCD-B2726 /
LCD-D2726)
for tuner input (TV):
AUTO or PAL
for external input (SCART, S-VIDEO, VIDEO):
AUTO, PAL, NTSC3.58 or NTSC4.43
(LCD-C2706 / LCD-C2707 / LCD-C2717 / LCD-C2726 /
LCD-C3206 / LCD-C3207)
for tuner input (TV):
AUTO, SECAM or PAL
for external input (SCART, S-VIDEO, VIDEO):
AUTO, SECAM, PAL, NTSC3.58 or NTSC4.43
Teletext Reception
Many TV channels transmit Teletext information along with their
TV channels. With this unit, you can retrieve and display it on the
screen using the built-in Teletext decoder.
1) Press (text) to switch the Teletext decoder on. Your unit
now shows Teletext for the TV channel you have selected.
Press
(text) again to show Teletext in transparent mode.
2) If you want to select another page, press the Number
buttons or Cursor K / L.
Note: • To enlarge fonts, press EXPAND.
To select Teletext subpages, press SUB CODE.
To directly select the page numbers shown at the bottom
of the TV screen, use
RED/GREEN/YELLOW/CYAN.
To call up the hidden information, press REVEAL.
To hold the current page, press (hold).
To go back to the start page, press (index).
3) Press (text) to switch the Teletext decoder off.
Setting the Sleep Timer
The sleep timer function allows you to have the power
automatically turn off after a set time period.
1) Press STANDBY-ON to turn on the TV and press SLEEP on
the remote control.
2) You may change the sleep time by pressing SLEEP on the
remote control repeatedly. The timer can be set up to 90
minutes. Each time
SLEEP is pressed the time increases by
30 minutes. (The timer display counts up and sleep timer will
be displayed on the screen when you press
SLEEP on the
remote control.)
Note: • When you disconnect the unit from the AC outlet or
when you have a power failure, the sleep time will be lost.
To Cancel the Sleep Timer
Press
SLEEP repeatedly until “0” is displayed.
TV channel HDMI SCART1
SCART2
VIDEO
YPbPr
L5950EA(EN).fm Page 11 Friday, March 30, 2007 2:46 PM
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Funai LCD-D2706 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Funai LCD-D2706 in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info