Manual Funai LC5-D32BB (page 12 of 16) (English)

503730

Zoom out

Zoom in

1/16

OPERATIONS

Watching a TV Programme

1) Press STANDBY-ON to turn on the TV.

2) Select the desired channel with / (prog.) or

the Number buttons.

• Enter a channel number as two digits within 2.5 seconds for

quicker access. For example, to select channel 6, press 0 and 6.

If you only press 6, channel 6 will be selected after 2.5 seconds.

• You can only select channels 1–99.

3) Adjust the volume to the desired listening level using

VOL. +/– on the control panel or +/– (vol.) on the remote

control.

• If you want to mute the sound temporarily (e.g. during a

telephone call), press (mute) on the remote control.

When you press (mute) again, the sound will return at its

original volume level.

4) Adjust picture controls for a natural looking image.

(See “Picture Adjustment”.)

External Input Mode

When you connect external devices including DVD player, DVD

recorder and home audio system, you can easily switch the input

mode by using INPUT SELECT.

Each time you press INPUT SELECT, TV screen will change as

below.

TV Colour System Change

Different countries use different television colour systems. You

can change the system by pressing COLOR SYSTEM.

When you select “AUTO” by pressing COLOR SYSTEM, this

unit will distinguish the system automatically according to the

input signal from the tuner or external devices.

If the picture on the TV screen is black and white, select the

system manually by using COLOR SYSTEM. Each time you

press COLOR SYSTEM, TV screen will change as follows.

for tuner input (TV):

AUTO or PAL

for external input (SCART, S-VIDEO, VIDEO):

AUTO, PAL, NTSC3.58 or NTSC4.43

Teletext Reception

Many TV stations transmit Teletext information along with their

TV channels. With this unit, you can retrieve and display it on the

screen using the built-in Teletext decoder.

1) Press (text) to switch the Teletext decoder on. Your unit

now shows Teletext for the TV channel you have selected.

Press (text) again to show Teletext in transparent mode.

2) If you want to select another page, press

the Number buttons or Cursor K / L.

3) Press (text) to switch the Teletext decoder off.

Setting the Sleep Timer

The sleep timer function allows you to have the power

automatically turn off after a set time period.

1) Press STANDBY-ON to turn on the TV and press SLEEP

on the remote control.

2) You may change the sleep time by pressing SLEEP on the

remote control repeatedly. The timer can be set up to 120

minutes. Each time SLEEP is pressed the time increases by

30 minutes. (The timer display counts up and sleep timer will

be displayed on the screen when you press SLEEP on the

remote control.)

To Cancel the Sleep Timer

Press SLEEP repeatedly until “SLEEP 0 MIN.” is displayed.

Picture Adjustment

The picture can be adjusted according to your personal

preferences. These settings are automatically stored after exiting

the picture menu.

1) Press STANDBY-ON to turn on the TV.

2) Press SETUP so that the menu display appears on the TV

screen.

3) Press Cursor K / L to point to “PICTURE”, then press

ENTER.

4) Press Cursor K / L to select an item you want to adjust,

then press ENTER.

5) Press Cursor K / L to adjust the level, then press ENTER.

6) Press SETUP to exit.

TV channel



SCART1



SCART2



YPbPr





HDMI2



HDMI1



VIDEO

Note:

• When you use the S-VIDEO connection, S-VIDEO

input jack is given priority over the VIDEO input jack.

Note:

• To enlarge fonts, press EXPAND.

• To select Teletext subpages, press SUBCODE.

• To directly select the page numbers shown at the

bottom of the TV screen, use RED/GREEN/

YELLOW/BLUE.

• To call up the hidden information, press REVEAL.

• To hold the current page, press (hold).

• To go back to the start page, press (index).

Note:

• When you disconnect the unit from the AC outlet or

when you have a power failure, the sleep timer will be

cancelled.

Cursor K Cursor L

BRIGHTNESS to increase brightness to decrease brightness

CONTRAST to increase contrast to decrease contrast

COLOUR to brilliant to pale

SHARPNESS to clear to soft

TINT to green to purple

Note:

• If you want to initialise the picture adjustment settings,

select “RESET” and press ENTER.

• “TINT” appears only when receiving NTSC signals

from an additional device connected by either SCART

jack, VIDEO input jack or S-VIDEO input jack.

BACK

ENTER

PICTURE

BACK

BRIGHTNESS

CONTRAST

COLOUR

SHARPNESS

TINT

RESET

-2

+11

SELECTBACK

A73F0EP_EN.book Page 12 Wednesday, September 12, 2007 10:48 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Funai LC5-D32BB in the language / languages: English as an attachment in your email.

The manual is 1,36 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Funai LC5-D32BB Manual

Product: