503730
9
Zoom out
Zoom in
Previous page
1/16
Next page
9
EN
SET UP FOR USE
Unless stated, all operations described are based on the use of
remote control. Some operations can be carried out using the
buttons on the control panel.
On-screen menu will disappear from the TV screen
automatically after about 60 seconds if you do not press any
buttons during the setting operation.
Initial Setting
When you turn on the TV for the first time, you need to set the
followings to use the TV appropriately.
1) Connect the power cord to a standard AC outlet.
2) Press STANDBY-ON to turn on the TV, then
“LANGUAGE” menu will appear.
3) Press Cursor K / L repeatedly to select your desired
language, then press ENTER.
(See “Language Selection” for more information.)
4) “COUNTRY” menu will appear.
Press Cursor K / L repeatedly to select your desired
country, then press ENTER.
(See “Country Settingfor more information.)
5) “CHANNEL TUNING” menu will appear.
Press Cursor K / L to select “START”, then press ENTER.
(See “Automatic Channel Presetting” for more information.)
Language Selection
If you want to change the language of the on-screen menu, follow
the procedure below.
1) Press STANDBY-ON to turn on the TV.
2) Press SETUP so that the menu display appears on the TV
screen.
3) Press Cursor K / L to point to “LANGUAGE”, then press
ENTER.
4) Press Cursor K / L repeatedly to select your desired
language, then press ENTER.
5) Press SETUP to exit.
Country Setting
You can select your desired TELETEXT language.
1) Press STANDBY-ON to turn on the TV.
2) Press SETUP so that the menu display appears on the TV
screen.
3) Press Cursor K / L to point “COUNTRY”, then press
ENTER.
4) Press Cursor K / L repeatedly to select your desired
country, then press ENTER.
The selected country will be indicated by yellow.
5) Press SETUP to exit.
Automatic Channel Presetting
You can programme the tuner to scan only the channels that are
receivable in your area.
1) Press STANDBY-ON to turn on the TV.
2) Press SETUP so that the menu display appears on the TV
screen.
3) Press Cursor K / L to point to “CHANNEL TUNING”,
then press ENTER.
4) Press Cursor K / L to point to “AUTO”, then press
ENTER.
The tuner scans and memorises all the active channels in your
area. When “AUTO TUNING” is completed, the lowest
memorised channel reappears on the screen, and you can use
PROG. +/– on the control panel or / (prog.) on the
remote control for the memorised channels.
•If you press SETUP during the scanning, this operation will
be stopped and the lowest memorised channel will appear on
the TV screen.
Note:
If some digits appear in the corner of the screen, press
STANDBY-ON without unplugging the power cord.
Note:
If you press SETUP during the initial setting, the
operation will be stopped and nothing will appear on
the TV screen. You need to set again to complete the
initial setting.
Note:
If you select “BACK” in the screen menu and press
ENTER, the display will return to previous one.
BACK
OK
ENTER
LANGUAGE
BACK
SELECTBACK
BACK
OK
ENTER
AUTO TUNING
START FINISH
CHANNEL
BACK
AUTO
MANUAL
MOVE
SELECTBACK
A73F0EP_EN.book Page 9 Wednesday, September 12, 2007 10:48 AM
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Funai LC5-D32BB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Funai LC5-D32BB in the language / languages: English as an attachment in your email.

The manual is 1,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info