Manual Funai F419TB (page 2 of 8) (English)

503465

Zoom out

Zoom in

1/8

INSTALLING THE BATTERIES

Slide the battery compartment cover on the

remote unit.

Insert 2 "AA" penlight batteries into battery

compartment in the direction as indicated by

the polarity (+ / -) markings. Batteries installed

with incorrect polarity may damage the remote

unit.

Replace the cover.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLI-

ANCE TO RAIN OR MOISTURE.

IMPORTANT SAFEGUARDS

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK) NO

USER SERVICEABLE PARTS INSIDE. REFER SER-

VICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

THIS SYMBOL INDICATES THAT DAN-

GEROUS VOLTAGE CONSTITUTING A

RISK OF ELECTRIC SHOCK IS PRE-

SENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT

THERE ARE IMPORTANT OPERATING

AND MAINTENANCE INSTRUCTIONS

IN THE LITERATURE ACCOMPANYING

THE APPLIANCE.

The important note is located on the rear of the cabinet.

1. Read instructions-All the safety and operating instruc-

tions should be read before the appliance is operated.

2. Retain Instructions-The safety and operating instruc-

tions should be retained for future reference.

3. Heed Warnings-All warnings on the appliance and in

the operating instructions should be adhered to.

4. Follow Instructions-All operating and use instructions

should be followed.

5. Cleaning-Unplug TV from the wall outlet before clean-

ing. Do not use liquid cleaners or aerosol cleaners. Use

a damp cloth for cleaning.

EXCEPTION: A product that is meant for uninterrupt-

ed service and, that for some specific reason, such as

the possibility of the loss of an authorization code for a

CATV converter, is not intended to be unplugged by

the user for cleaning or any other purpose, may

exclude the reference to unplugging the appliance in

the cleaning description otherwise required in item 5.

6. Attachments-Do not use attachments not recommended

by the TV manufacturer as they may cause hazards.

7. Water and Moisture-Do not use this TV near water, for

example, near a bath tub, wash bowl, kitchen sink, or

laundry tub, in a wet basement, or near a swimming

pool, and the like.

8. Accessories-Do not place this TV on an unstable cart,

stand, tripod, bracket, or table. The TV may fall, caus-

ing serious injury to someone, and serious damage to

the appliance. Use only with a cart, stand, tripod,

bracket, or table recommended by

the manufacturer, or sold with the

TV.

Any mounting of the appliance

should follow the manufacturer’s

instructions and should use a

mounting accessory recommended

by the manufacturer. An appliance and cart combina-

tion should be moved with care. Quick stops, excessive

force, and uneven surfaces may cause the appliance

and cart combination to overturn.

9. Ventilation-Slots and openings in the cabinet and the

back or bottom are provided for ventilation and to

ensure reliable operation of the TV and to protect it

from overheating, these openings must not be blocked

or covered. The openings should never be blocked by

placing the TV on a bed, sofa, rug, or other similar sur-

face. This TV should never be placed near or over a

radiator or heat register. This TV should not be placed

in a built-in installation such as a bookcase or rack

unless proper ventilation is provided or the manufac-

turer’s instructions have been adhered to .

10. Power Sources-This TV should be operated only from

the type of power source indicated on the marking

label. If you are not sure of the type of power supply to

your home, consult your appliance dealer or local

power company. For TVs intended to operate from bat-

tery power, or other sources, refer to the operating

instructions.

11. Grounding or Polarization-This TV is equipped with a

polarized alternating-current line plug(a plug having

one blade wider than the other). This plug will fit into

the power outlet only one way. This is a safety feature.

If you are unable to insert the plug fully into the outlet,

try reversing the plug. If the plug should still fail to fit,

contact your electrician to replace your obsolete outlet.

Do not defeat the safety purpose of the polarized plug.

12. Power-Cord Protection-Power-supply cords should be

routed so that they are not likely to be walked on or

pinched by items placed upon or against them, paying

particular attention to cords at plugs, convenience

receptacles, and the point where they exit from the

appliance.

PORTABLE CART WARNING

S3126A

13. Outdoor Antenna grounding-If an outside antenna or

cable system is connected to the TV, be sure the anten-

na or cable system is grounded so as to provide some

protection against voltage surges and built-up static

charges. Article 810 of the National Electrical Code,

ANSI/NFPA No. 70, provides information with respect

to proper grounding of the mast and supporting struc-

ture, grounding of the lead-in wire to an antenna dis-

charge unit, size of grounding conductors, location of

antenna-discharge unit, connection to grounding elec-

trodes, and requirements for the grounding electrode.

(Fig. A)

14. Lightning-For added protection for this TV receiver

during a lightning storm, or when it is left unattended

and unused for long periods of time, unplug it from the

wall outlet and disconnect the antenna or cable system.

This will prevent damage to the TV due to lightning

and power-line surges.

15. Power Lines-An outside antenna system should not be

located in the vicinity of overhead power lines or other

electric light of power circuits, or where it can fall into

such power lines or circuits. When installing an outside

antenna system, extreme care should be taken to keep

from touching such power lines or circuits as contact

with them might be fatal.

16. Overloading-Do not overload wall outlets and exten-

sion cords as this can result in a risk of fire or electric

shock.

17. Object and Liquid Entry-Never push objects of any

kind into this TV through openings as they may touch

dangerous voltage points or short out parts that could

result in a fire or electric shock. Never spill liquid of

any kind on the TV.

18. Servicing-Do not attempt to service this TV yourself as

opening or removing covers may expose you to dan-

gerous voltage or other hazards. Refer all servicing to

qualified service personnel.

19. Damage Requiring Service-Unplug this TV from the

wall outlet and refer servicing to qualified service per-

sonnel under the following conditions:

a. When the power supply cord or plug is damaged or

frayed.

b. If liquid has been spilled, or objects have fallen into

the TV.

c. If the TV has been exposed to rain or water.

d. If the TV does not operate normally by following the

operating instructions. Adjust only those controls that

are covered by the operating instructions, as improper

adjustment of other controls may result in damage and

will often require extensive work by a qualified techni-

cian to restore the TV to its normal operation.

e. If the TV has been dropped or damaged in any way.

f. When the TV exhibits a distinct change in perfor-

mance-this indicates a need for service.

20. Replacement Parts-When replacement parts are

required, be sure the service technician uses replace-

ment parts specified by the manufacturer that have the

same characteristics as the original part. Unauthorized

substitutions may result in fire, electric shock, injury to

persons or other hazards.

21. Safety Check-Upon completion of any service or

repairs to this TV, ask the service technician to perform

routine safety checks to determine that the TV is in

proper operating condition.

22. Heat-This TV product should be situated away from

heat sources such as radiators, heat registers, stoves, or

other products (including amplifiers) that produce heat.

FIGURE A

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE

ELECTRIC

SERVICE

EQUIPMENT

GROUND

CLAMP

NEC - NATIONAL ELECTRICAL CODE POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

S2898A

GROUND CLAMPS

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

ANTENNA

LEAD IN

WIRE

OPERATING CONTROLS AND FUNCTIONS

POWER

VOLUME

CHANNEL

12 3 45

ANT.IN

- FRONT PANEL -

- REAR PANEL -

1. MENU button- Press to display the menu

on the TV screen.

2. VOLUME ▲/▼ buttons- Press to control

the volume level.

Press to determine a setting mode from the

menu on the TV screen. (only the VOL ▲

button)

Press to select or adjust from a particular

menu. (for example: Language Selection,

Channel Presetting, Closed Caption Selection,

Picture Adjustment, V-CHIP Set Up)

3. CHANNEL ▲/▼ buttons- Press to select

memorized channel.

Press to select a setting mode from the

menu on the TV screen.

Press to select item you want to adjust in

the picture control mode.

4. POWER button- Press to turn the TV ON

and OFF.

5. Infrared Sensor Window- Receives the

infrared control signals from the remote

control unit.

6. CHANNEL NUMBER button- Press two

digits to directly access the desired channel.

Remember to press a "0" before a single

digit channel.

+100 button- Press to select cable channels

which are equal or greater than number 100.

7. MUTE button- Press the MUTE button to

turn off the sound portion of the TV pro-

gram. (Volume level display turns LIGHT

RED from LIGHT BLUE.) Press the

MUTE button again or press the VOL(ume)

▲ or ▼ button to restore sound.

8. CHANNEL RETURN button- Press this

button to go back to the previously viewed

channel. For example, pressing the CHAN-

NEL RETURN button once will change

channel display from CH 3 (present chan-

nel) to CH 10 (previously viewed channel),

and pressing it a second time will return

from CH 10 to CH 3.

9. DISPLAY button- Press to display the

channel number on the screen. If you press

it again, the channel number will disappear.

10.SLEEP button- Press the SLEEP button to

display the sleep timer and start the func-

tion. The shut off time can be determined

by the number of times you press the but-

ton. (0, 10, 20, 30,..90, 0 minutes)

11.ANT(enna). IN jack- Connect to an anten-

na, cable system, or satellite system.

12.AC cord- Connect to a standard AC outlet

(120V/60Hz).

NOTE: Remove the AC cord from the

hook to avoid breaking the wire before you

connect to a standard AC outlet.

POWER

123

456

789

0 +100

DISPLAY

VOL

SLEEP

CHANNEL

RETURN

MUTE

This manual covers 13

and 19

. The operation of the two models are exactly the same except the appearance. 19

model is illustrated in this manual.

- REMOTE CONTROL -

L1351.QX33 01.5.14 4:56 PM Page 2

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Funai F419TB in the language / languages: English as an attachment in your email.

The manual is 0,34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Funai F419TB Manual

Product: