503539
63
Zoom out
Zoom in
Previous page
1/76
Next page
61
Änderung des Einstellungsmenüs
GE
Hinweis
Bei der Wiedergabe einer Disk mit
Urheberrechtsschutz:
Selbst wenn Sie „96 kHz“ wählen, wird der Ton auf 48
kHz heruntergemischt.
Wählen Sie mit den [Pfeiltasten U / D]
eine Einstellung, drücken Sie dann
[ENTER].
Ihre Einstellung ist aktiviert.
PCM: Konvertiert Dolby Digital in PCM
(2-Kanal).
Wenn Ihr Verstärker / Decoder NICHT Dolby
Digital-kompatibel ist, stellen Sie ihn auf
„PCM“.
Stream: Gibt Dolby Digital-Signale aus.
Wenn Ihr Verstärker / Decoder Dolby Digital-
kompatibel ist, stellen Sie ihn auf „Stream“.
Tipp
Zur Wiedergabe einer im VR-Modus aufgezeichneten
DVD-RW-Disk:
Wenn die Tonquelle der Disk im Dolby Digital-Format
ist, stellen Sie „Dolby Digital“ auf „PCM“, so dass Sie
mit Ihrem Verstärker / Decoder auf Audio 1 (L), Audio 2
(R), oder eine Kombination beider (L / R) wechseln
können.
Wählen Sie mit den [Pfeiltasten U / D]
eine Einstellung, drücken Sie dann
[ENTER].
Ihre Einstellung ist aktiviert.
PCM: Konvertiert MPEG in PCM.
Wenn Ihr Verstärker / Decoder NICHT MPEG-
kompatibel ist, stellen Sie ihn auf „PCM“.
Stream: Gibt MPEG-Tonsignale aus.
Wenn Ihr Verstärker / Decoder MPEG-
kompatibel ist, stellen Sie ihn auf „Stream“.
Wählen Sie mit den [Pfeiltasten
U / D] eine Einstellung, drücken Sie
dann [ENTER].
Ihre Einstellung ist aktiviert.
EIN: Gibt DTS-Signale aus.
Wenn Ihr Verstärker / Decoder DTS-kompatibel
ist, stellen Sie ihn auf „EIN“.
AUS: Es wird kein DTS-Signal ausgegeben.
Wenn Ihr Verstärker / Decoder NICHT DTS-
kompatibel ist, stellen Sie ihn auf „AUS“.
Dynamiksteuerung (Standard: EIN)
Stellen Sie sie auf „EIN“, um den Dynamikumfang
enger zu stecken.
Wählen Sie mit den [Pfeiltasten
U / D] eine Einstellung, drücken Sie
dann [ENTER].
Ihre Einstellung ist aktiviert.
Die Dynamikumfangsüberwachung steht nur bei
analogem Audioanschluss zur Verfügung.
Audio-Schnellvorlauf (Standard: AUS)
Stellen Sie ihn auf „EIN“, damit während der DVD-
Wiedergabe in 1,5facher Geschwindigkeit Ton
ausgegeben wird.
Wählen Sie mit den [Pfeiltasten
U / D] eine Einstellung, drücken Sie
dann [ENTER].
Ihre Einstellung ist aktiviert.
5 Drücken Sie [SETUP], um
abzubrechen.
Dolby Digital-Konvertierung (Standard: Stream)
Einstellungen für MPEG (Standard: PCM)
Digital Out - Dolby Digital
PCM
Stream
Stream
Digitalausgang - Dolby Digital
PCM
Stream
Stream
DVD
Digital Out
Dolby Digital
PCM
Stream
PCM
PCM
Stream
PCM
Digitalausgang - MPEG
DVD
Einstellungen für DTS (Standard: AUS)
Digital Out - DTS
ON
OFF
OFF
Digitalausgang - DTS
EIN
OFF
AUS
DVD
DVD
DVD
DVD
Fast Forward with Audio
ON
OFF
OFF
Audio-Schnellvorlauf
EIN
OFF
AUS
DVD
E97A0ED_GE.book Page 61 Monday, June 20, 2005 2:02 PM
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Funai DRV-A2635 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Funai DRV-A2635 in the language / languages: German as an attachment in your email.

The manual is 3,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info