503523
5
Zoom out
Zoom in
Previous page
1/16
Next page
5 EN
Installation
Connecting the VCR
Basic Connection
1) Disconnect the TV’s power cord from the AC outlet.
2) Disconnect the VHF/UHF TV aerial coaxial cable from
the TV.
3) Connect the VHF/UHF TV aerial coaxial cable to the
VCR.
4) Connect the VCR to the TV using the RF cable and the
Scart cable.
5) Plug the power cords of the VCR and TV into the AC
outlets.
Note: If your TV has AUDIO input jacks, you may connect
the AUDIO OUTPUT L/R jacks on the back of this
VCR to the AUDIO input jacks on your TV.
Other Connections
Euro Scart (AV) Sockets (Connecting to a decoder)
Your VCR is provided with two Scart sockets which you may
connect to other external devices with Scart sockets. We
recommend this connection to ensure a better audio and
picture quality.
Euro Scart cables are obtainable at your dealer.
AV1 (TV) Connection to TV
If your TV has Scart sockets, you may connect your VCR’s
AV1 (TV) scart socket to the Scart socket on the back of your
TV. Please see the instruction manual for your TV.
Note: You may connect the VCR to your audio amplifier.
1) Prepare an audio cable (not supplied).
2) Switch off your audio amplifier.
3) Insert one end of the audio cable into the corresponding
red and white AUDIO OUTPUT L/R jacks at the back of
the video recorder and the other end into the
corresponding audio input jacks at the audio amplifier.
AV2 (DECODER) Connection for Other External Devices
The second Scart socket AV2 (DECODER) is designated for
other external devices, e.g. decoder, another VCR, video
camera and so on.
Note: If you want to connect a TV with Scart socket to your
VCR, the TV must be connected to the VCR through
AV1 (TV). A connection to AV2 (DECODER) will not
function correctly.
AV Front Terminals
When you copy a video tape, or watch a programme recorded
on an another source, use the AUDIO/VIDEO input jacks on
the front panel of the VCR.
Note: When you connect a monaural VCR (another source)
to this VCR, connect the audio output jack of the
monaural VCR (another source) to the AUDIO L jack
of this VCR. The audio signal will be recorded in both
L and R channel equally.
External Input Mode
To receive the signal from an external source (decoder, video
camera, another VCR, etc.), connect the source to the AV2
(DECODER) socket, and press CHANNEL (K/L) or enter
“002” with the
number buttons. “AV2” appears on the TV
screen. If you use the AV1 (TV) socket, press
CHANNEL (K/L) or enter “001” with the number buttons.
“AV1” appears on the TV screen.
If you use the front AUDIO/VIDEO input jacks, press
CHANNEL (K/L) or enter “003” with the number buttons.
“AV3” appears on the TV screen.
AV1 (TV)
AUDIO
AUDIO
OUTPUT
OUTP UT
ANT OUT
ANT OUT
ANT IN
ANT IN
R
L
AV1 (TV)
UHF
VHF
VHF/UHF
MIXER
to ANT OUT
RF cable
(supplied)
to aerial
socket
(TV)
(Back of the unit)
to ANT IN
to 21-Pin
Scart socket
IN
AUDIO
LR
L
R
AUDIO
OUTPUT
[Back of the VCR]
Audio cable
(not supplied)
[A/V television]
AV1 (TV )
AV2 (DE COD ER )
AUDIOAUDIO
OUTPUTOUTP UT
ANT OUTANT OUT
ANT INANT IN
R
L
AV1 (TV)
(TV)
to aerial
socket
to 21-Pin
Scart socket
Decoder (Not supplied)
to 21-Pin Scart socket
to ANT IN
L
R
AUDIO
OUTPUT
[Back of the VCR]
VIDEO L-AUDIO-R
[Another source]
etc.
To the video
output jack
To the audio
output jack
[Front of the VCR]
Audio/Video
cables
(not supplied)
HM457ED(EN).fm Page 5 Friday, July 1, 2011 10:06 AM
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Funai D50Y-100M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Funai D50Y-100M in the language / languages: English as an attachment in your email.

The manual is 2,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Funai D50Y-100M

Funai D50Y-100M User Manual - German - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info