503524
65
Zoom out
Zoom in
Previous page
1/88
Next page
65
EN
Introduction Connections
Basic Setup /
DVB Operations
Recording Playback Editing Function Setup Others
Settings HDMI
Available only when
the display device is
connected to an
HDMI compatible
device with an HDMI
cable.
Format RGB When connected by an HDMI cable, sets the
appropriate colour space for your display device.
When the connected device is not compatible
with the “YCbCr”, “RGB” will be output
regardless of the setting here.
YCbCr
RGB Range
Normal Sets the black level when outputting the RGB
signal.
Enhanced
HDMI Video
Resolution
Auto Sets the resolution of the video signal being
output from the HDMI OUT jack.
“Auto”:
HDMI video resolution will be selected
automatically depending on the connected HDMI
device.
When “1080p”is selected, even if the video
source is 1080p24, it will be output in 1080p50.
Even if the video material is 1080p24 and
“1080p24” is selected, when connected device
is not compatible with 1080p24, it will be output
in 1080p50.
Even if “720p” is selected, when the playing
material is not 720p, it will be output in 1080i.
If inappropriate resolution is selected and the
display device goes blank, wait for 15 seconds
for auto recovery.
Holding [PLAY B] on the front panel for 5
seconds resets the setting to the default.
480p/576p
720p
1080i
1080p
1080p24
HDMI Deep
Colour
Available only
when the display
device supports
Deep Colour
feature.
Auto Reduces the posterisation effect of the playback
picture.
“Auto”:
Reduces the posterisation effect by automatically
outputting up to 36 bit colour whenever the unit
recognises the connected display device supports
Deep Colour feature.
“Off”:
Outputs the standard 24 bit colour.
Off
HDMI Audio Out
E Page 17
On Sets whether to output the audio from the HDMI
OUT jack.
Off
fun-Link
(HDMI CEC)
E Page 68
On Sets whether to utilise the fun-Link(HDMI CEC)
function.
Off
Display Menu
Language (fun-
Link)
E Page 68
Available only
when the “fun-
Link(HDMI CEC)
” is set to “On”.
On Recognises the OSD (on-screen display)
language set for the TV and automatically sets the
same language as the “Display Menu Language”
(OSD menu language) for this unit.
Off
Others Panel Display Auto Sets the brightness of the front panel display.
“Auto”:
Front panel display gets brighter when the power
is on and darker when the power is off.
“Bright”:
Front panel display gets brighter.
“Dark”:
Front panel display gets darker.
Bright
Dark
Screen Saver Off Sets the time it takes before the screen saver
activation.
1 minute
5 minutes
10 minutes
15 minutes
Category Menus / Options Descriptions
'8'&A'0DQQM2CIG(TKFC[(GDTWCT[2/
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Funai BH2-M200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Funai BH2-M200 in the language / languages: English as an attachment in your email.

The manual is 2,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info