503511
31
Zoom out
Zoom in
Previous page
1/33
Next page
46FD753P
39FL753P
32FL553P / 32FL553
29FL553P / 29FL553
24FL553P / 24FL553
LED LCD HD Television
Instruction Manual
English
2
EN
Contents
UNIT INFORMATION ...................................2
Trademark Information ..............................2
Servicing....................................................2
Cabinet Cleaning.......................................2
Panel Cleaning ..........................................2
Remote Control .........................................3
Control panel .............................................4
Terminal ....................................................5
INITIAL SETUP ............................................6
OPERATIONS ..............................................7
Watching a TV Programme .......................7
Favourite ...................................................7
EPG(Electronic Programme Guide) ..........7
Sleep Timer ...............................................8
Sound Select .............................................8
Subtitle Settings ........................................8
Teletext Settings........................................8
Switching the Input Source Mode..............9
SmartConnect ...........................................9
Recording ................................................10
Photo / Music / Video Playback...............11
OTHER SETTINGS ....................................15
Channel Settings .....................................15
PC Settings .............................................18
Picture Adjustment ..................................18
Sound Adjustment ...................................19
Time Settings ..........................................20
Lock Settings...........................................21
Setup Adjustment ....................................23
Hotel Mode Settings ................................26
TROUBLESHOOTING GUIDE...................28
SPECIFICATIONS......................................30
Input Resolution ......................................32
Multimedia Format...................................32
UNIT INFORMATION
Trademark Information
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of
Dolby Laboratories.
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
DVB is a registered trademark of the DVB Project.
The “HD TV” Logo is a trademark of
DIGITALEUROPE.
Servicing
Should your unit become inoperative, do not try to
correct the problem by yourself. There are no user-
serviceable parts inside. Take the unit to a Service
Centre for servicing.
Cabinet Cleaning
Gently wipe the front panel and other exterior
surfaces of the unit with a soft cloth.
Never use a solvent or alcohol. Do not spray
insecticide liquid near the unit. Such chemicals may
cause damage and discoloration to the exposed
surfaces.
Panel Cleaning
If the LCD panel should require cleaning, wipe it with
a cotton or soft cloth. Before cleaning the panel,
disconnect the power cord.
3
EN
Remote Control
1. (Power)
Turn the unit on and go into the standby mode.
2. SLEEP
Refer to “Sleep Timer” (p. 8).
3. Number buttons
Select the desired channel in TV mode and enters
the password in the PIN code input field.
4. EXIT
Returns to the previous display.
5. Ÿ / ź / Ż / Ź (Cursor)
6. OK
7. MENU
Displays the menu.
8. AUDIO
Select audio language/ mode.
Refer to “Sound Select” (p. 8).
9. /
Adjust the audio volume.
Refer to “To adjust the volume” (p. 7).
10. (Mute)
Turn off the sound.
Refer to “To adjust the volume” (p. 7).
11. RED / GREEN / YELLOW / BLUE
Use for “EPG(Electronic Programme Guide)”
(p. 7) / “[Programme Edit]” (p. 16)
.
12. DISPLAY
Displays the channel number or input source.
13. SOURCE
Switch the input source mode.
Refer to “Switching the Input Source Mode” (p. 9).
14. PICTURE MODE
Change the picture mode.
Refer to “[Picture Mode]” (p. 18).
15. SOUND MODE
Change the sound mode.
Refer to “[Sound Mode]” (p. 19).
16. FAV / FAV
Use for “Favourite” (p. 7).
17. FAV
Use for “Favourite” (p. 7).
18. EPG
Use for “EPG(Electronic Programme Guide)”
(p. 7).
19.
Select a channel.
Refer to “To select a channel” (p. 7).
20. (Play / Pause) / (Skip backward) /
(Skip forward) / (Stop) / (Rewind) /
(Fast-forward)
Use for “Recording” (p. 10) / “Photo / Music /
Video Playback” (p. 11).
21. REC (Record)
Use for “Recording” (p. 10).
22. (Subtitle)
Displays the subtitle list.
Refer to “Subtitle Settings” (p. 8).
23. (Expand) / (Subpage) / (Hold) /
(Text) / (Reveal) / (Index)
Use for “Teletext Settings” (p. 8).
15
16
17
18
19
22
14
13
1
2
3
4
6
5
7
8
9
10
11
20
12
23
21
4
EN
Control panel
This window has no function.
Keys on Rear.
Control Keys are located on the Rear side of the
TV.
1. Standby / Power indicator
(Power on : no light, Standby : red)
2. Infrared sensor window
Receive the infrared rays transmitted from the
remote control.
3. VOL Ż / Ź
Watching TV, VOL Ż / Ź on the front panel
works the same function as / .
Refer to “9. / ” (p. 3).
On the menu, VOL Ż / Ź on the front panel
works the same function as Ż / Ź (cursor).
4. CH Ÿ / ź (46FD753P)
PROG Ÿ / ź (39FL753P/32FL553P/32FL553/
29FL553P/29FL553/24FL553P/24FL553)
Watching TV, PROG Ÿ / ź and CH Ÿ / ź on
the front panel works the same function as
.
Refer to “19. ” (p. 3).
On the menu, PROG Ÿ / ź and CH Ÿ / ź on
the front panel works the same function as Ÿ /
ź (cursor).
5. MENU
Refer to “7. MENU” (p. 3).
6. SOURCE
Refer to “13. SOURCE ” (p. 3).
On the menu, SOURCE on the front panel
works the same function as OK.
7. (Power)
Refer to “1. (Power) (p. 3).
21
76543
76543
2
1
46FD753P
39FL753P/32FL553P/32FL553/
29FL553P/29FL553/24FL553P/24FL553
5
EN
Terminal
1. AC power cord inlet
2. HDMI (HDMI 1 / HDMI 2) input jacks
3. Coaxial digital audio output jack
4. (Aerial) input jack
5. Headphone audio output jack
6. SCART jack
7. Component video, Composite video and
Audio (L/R) input jacks
8. CI slot
9. USB terminal (p. 10, 11)
10. PC (VGA) input jack
11. Audio input jack for PC connection
HDMI (HDMI 3) input jack for MHL function
P series only - (46FD753P/39FL753P/32FL553P/
29FL553P/24FL553P)
1
1
4
3
2
765
11
10
9
8
39FL753P/32FL553P/32FL553/
29FL553P/29FL553/24FL553P/24FL553
46FD753P
Data input from USB flash memory only.
User should not connect any devices to the USB terminal
such as digital camera, keyboard, mouse, etc. (because
these will not work.)
The software update is, in most cases, handled by an
authorised service person or in some circumstances the
user may be asked to do the software update themselves.
6
EN
INITIAL SETUP
This section will guide you through the unit's initial
setup which includes selecting a language for your on-
screen menu and auto scan, which automatically
scans and memorises viewable channels.
1 After making all the necessary connections, turn
on the unit pressing .
2 Use Ż / Ź to select the location.
3
Use
Ÿ / ź
to select
[OSD Language]
, the
n select
the language you want, using Ż / Ź.
4 Use Ÿ / ź to select [Country], then select the
country you want, using Ż / Ź.
5 Press OK to enter [Auto Tuning].
6 Use Ÿ / ź to select [Tune Type], then select
[DTV], [ATV] or both channels, using Ż / Ź.
7 Use Ÿ / ź to select [Digital Type], then select
[DVB-T] or [DVB-C], using Ż / Ź.
8 Use Ÿ / ź to select [Scan Type], then select
[Full] or [Quick], using Ż / Ź.
9 Use Ÿ / ź to select the item you want, and then
adjust the setting, using Ż / Ź.
10 Press OK to start scanning.
If you select [Retail Mode], the confirm message will
appear.
Auto Tuning
First Time Installation
Home Mode
Germany
Country
English
OSD Language
Auto Tuning
Quick
Auto
Symbol Rate
Auto
Frequency
Auto
Network ID
Scan Type
DVB-T
Digital Type
ATV + DTV
Tune Type
Back Start
When scanning starts, confirmation menu will appear.
To turn back previous page, pressing MENU button in
[Auto Tuning] menu.
In case when not all available cable channels are found
through [Full] scanning mode, these programs can be
scanned by selecting [Quick] mode. Please note, that
[Quick] mode scanning can take additional time.
Depending on cable TV provider specification, correct
subscription to cable signals cannot be guaranteed.
When the scanning is completed, the lowest memorised
digital or analogue channel will be displayed.
If you press MENU during channel scanning, this operation
will be paused, then press MENU again to exit the initial
setup.
You can set the setup again. Refer to “[First Time
Installation]” (p. 25)
10
EN
Recording
This unit can record a TV programme. Use a USB flash
memory for saving the data.
Setup for Recording / Playback
You must connect the USB flash memory to USB
terminal of this unit (shown below).
1 Press SOURCE to display the input source
mode and use Ÿ / ź to select [DTV], then press
OK.
Record
2 Select the channel you want, then press REC to
start recording the current programme.
3 Press to stop the recording.
Playback
2 Press (Index) to call up the recorded list.
3 Use Ÿ / ź to select the desired file, then press
OK to start the playback.
Operation in Playback
Press OK to display the menu.
The USB flash memory is not supplied with this unit.
USB 2.0 High speed flash memory is recommended.
The unit recognise a USB flash memory only.
Do not use a USB hub and an extension cord between the
USB flash memory and the unit.
Always connect the USB flash memory to this unit directly.
We do not guarantee the all USB flash memory can be
supported on this unit.
If you want to exit this mode, select any other input source
mode. Refer to “Switching the Input Source Mode” (p. 9).
When you stop the recording, it will return to normal
broadcast television.
When the storage space of disk is shortage, it will appear a
warning message. Then it stops recording automatically
and returns to normal broadcast television.
Play FB FF Prev. Next Pause Stop
08:31
(0002:50:19)
[00:00:40]
2 France 2 HD
:
Press to play or pause the playback.
/ :
Press to rewind or fast-forward the playback.
Every press on / will rewind or fast-forward
faster up to five.
/ :
Press to skip backward or forward the file.
:
Press to stop the playback.
EXIT:
Press to disappear the menu during the menu
appears.
Recorded List
DeleteMove
Play Exit
[6% Used]
01:05:01 Jan
1/1
30/01/2013
Today’s news
Movie: The player
Programme Title Date
1 30/01/2013
2
01:08:31 (00:01:20)
Movie: The player
01:08:31 (00:01:20)
A player starts his carrer in new
school. He founds great competitions
and face off against them. He gets
better rapidly and his team will make
the legend...
11
EN
Photo / Music / Video Playback
This unit can play picture, music and video files. Use
the USB flash memory that contains the files.
Setup for Playback
You must connect the USB flash memory to USB
terminal of this unit (shown below).
1 Press SOURCE to display the input source
mode and use Ÿ / ź to select [Media], then
press OK.
Note for Playback
If you want to exit this mode, select any other input source
mode. Refer to “Switching the Input Source Mode” (p. 9).
You can check Multimedia Specification. Refer to
“Multimedia Format” (p. 32).
The USB flash memory is not supplied with this unit.
The unit recognise a USB flash memory only.
Do not use a USB hub and an extension cord between the
USB flash memory and the unit.
Always connect the USB flash memory to this unit directly.
We do not guarantee the all USB flash memory can be
supported on this unit.
Funai cannot be held responsible if your USB flash memory
is not supported, nor will Funai accept any liability for
damage or loss of stored data.
A USB flash memory that required its own driver or the
device with a special system such as fingerprint recognition
are not supported.
Be sure to keep a backup copy of the original files on your
device before you play them back on this unit. We have no
responsibilities for damage or loss of your stored data.
To avoid damaging the USB flash memory and the unit
always turn off the unit before you remove the USB flash
memory.
This unit is not allowed to use the USB flash memory which
requires external power supply (500 mA or more).
This unit can be recognised up to 60,000 files in the USB
flash memory.
This unit may not be recognised if the length of the file
names is too long. Only English characters can be
recognised.
This unit does not support NTFS or the file other than
FAT16 and FAT32 file system. If the file is not supported,
error message appears.
When the unit does not recognise the USB flash memory,
try reconnecting it.
This unit cannot play back a file which go over the limit of
file restriction.
12
EN
[PHOTO]
2 Use Ż / Ź to select [PHOTO], then press OK.
3 Use Ż / Ź to select [C], then press OK to enter
the file.
4 Use Ÿ / ź / Ż / Ź to select the desired file, then
press OK.
Operation in Slideshow
The check box is displayed at the right bottom by pressing
the OK. The files having the check box are played by
pressing . If they are not selected, then all playable files
in the folder are played.
If you put audio files into the folder of picture files, you can
play music during the slideshow.
MOVIEMUSICPHOTO
USB 2.0
Return
PHOTO
Delete
Aniversary ...
Live 2011. 1..
Marriage cel..
Memory 20...
Kyoto 2010...
Return
Exit
PHOTO
OK / DISPLAY :
Press to display the menu.
[Repeat]:
Use Ż / Ź to select [Repeat] and press OK to
switch the repeat mode: [Repeat None], [Repeat
1] and [Repeat All] in order.
[Music]:
Use Ż / Ź to select [Music] and press OK to play
the music file in the same folder.
[Rotate](right-handed or left-handed rotate):
Use Ż / Ź to select [Rotate] and press OK to turn
the picture clockwise by 90 degrees.
[Zoom In]:
Use Ż / Ź to select [Zoom In] and press OK to
zoom in the display.
The zoom factor: 2x, 4x and 8x
[Zoom Out]:
Use Ż / Ź to select [Zoom Out] and press OK to
zoom out the display.
The zoom factor: 1x, 2x and 4x
[Playlist]:
Use Ż / Ź to select [Playlist] and press OK to
display the playlist.
[Info.]:
Use Ż / Ź to select [Info.] and press OK to
display the information of the current file.
[Move View]:
Use Ż / Ź to select [Move View] and press OK to
enter the move view mode, and use Ÿ / ź / Ż /
Ź
to move the picture, if the picture big enough to
surpass the screen.
:
Press to play or pause the slideshow.
/ :
Press to skip backward or forward the file.
:
Press to stop the slideshow.
EXIT:
Press to go back to the previous screen.
13
EN
[MUSIC]
2 Use Ż / Ź to select [MUSIC], then press OK.
3 Use Ż / Ź to select [C], then press OK to enter
the file.
4 Use Ÿ / ź / Ż / Ź to select the desired file, then
press OK.
Operation in Playback
The check box is displayed at the right bottom by pressing
the OK. The files having the check box are played by
pressing . If they are not selected, then all playable files
in the folder are played.
MOVIEMUSICPHOTO
USB 2.0
Return
MUSIC
Delete
New songs ...
Mercury feat...
Reeeed
Ferdinand F..
Return
Exit
MUSIC
OK / DISPLAY :
Press to display the menu.
[Repeat]:
Use Ż / Ź to select [Repeat] and press OK to
switch the repeat mode: [Repeat None], [Repeat
1] and [Repeat All] in order.
[MUTE]:
Use Ż / Ź to select [MUTE] and press OK.
[Playlist]:
Use Ż / Ź to select [Playlist] and press OK to
display the playlist.
[Info.]:
Use Ż / Ź to select [Info.] and press OK to
display the information of the current file.
[Goto Time]:
Use Ż / Ź to select [Goto Time] and press OK to
move the time you want in the playback.
:
Press to play or pause the playback.
/ :
Press to rewind or fast-forward the playback.
/ :
Press to skip backward or forward the file.
:
Press to stop the playback.
EXIT:
Press to go back to the previous screen.
15
EN
OTHER SETTINGS
Some settings need to enter PIN code.
Refer to “Lock Settings” (p. 21).
Channel Settings
You can edit the channel settings.
1 Use Ż / Ź to select [CHANNEL].
[Auto Tuning]
You can scan the DTV, ATV or both channel in your
area automatically.
2 Use Ÿ / ź to select [Auto Tuning], then press
OK.
3 Use Ÿ / ź to select [Tune Type], then select
[DTV], [ATV] or both channels, using Ż / Ź.
4 Use Ÿ / ź to select [Digital Type], then select
[DVB-T] or [DVB-C], using Ż / Ź.
5 Use Ÿ / ź to select [Scan Type], then select
[Full] or [Quick], using Ż / Ź.
6 Use Ÿ / ź to select the item you want, and then
adjust the setting, using Ż / Ź.
7 Press OK to start scanning.
< For DVB-T scanning >
[ATV Manual Tuning]
For Analogue TV operation
You can search ATV channel manually in your area.
2 Use Ÿ / ź to select [ATV Manual Tuning], then
press OK.
3 Use Ÿ / ź to select [Current CH], then use Ż /
Ź to select the channel you want.
4 Use Ÿ / ź to select [Color System], then use Ż
/ Ź to select the system you want.
5 Use Ÿ / ź to select [Sound System], then use
Ż / Ź to select the system you want.
6 Use Ÿ / ź to select [Fine-Tune], then use Ż / Ź
to adjust the setting.
7 Use Ÿ / ź to select [AFC], then use Ż / Ź to
select [On] or [Off].
8 Use Ÿ / ź to select [Search], then use Ż or Ź
to start scanning.
Read this first
Before adjust each setting, press MENU to display the
menu.
To exit the menu, press MENU.
If you set [Lock System] to [On], you have to enter the 6-
digit PIN code you set using the Number buttons.
Auto Tuning
ATV Manual Tuning
DTV Manual Tuning
Programme Edit
Signal Information
CI Information
Schedule List
CHANNEL
Move SelectReturn Exit
Auto Tuning
Quick
Auto
Symbol Rate
Auto
Frequency
Auto
Network ID
Scan Type
DVB-T
Digital Type
ATV + DTV
Tune Type
Back Start
When scanning starts, confirmation menu will appear.
To turn back previous page, pressing MENU button in
[Auto Tuning] menu.
In case when not all available cable channels are found
through [Full] scanning mode, these programs can be
scanned by selecting [Quick] mode. Please note, that
[Quick] mode scanning can take additional time.
Depending on cable TV provider specification, correct
subscription to cable signals cannot be guaranteed.
When the scanning is completed, the lowest memorised
digital or analogue channel will be displayed.
If you press MENU during channel scanning, this operation
will be paused, then press MENU again to exit the initial
setup.
If you set [Lock System] to [On], you have to enter the 6-
digit PIN code you set using the Number buttons.
If you set to [On], this unit adjust tuning to near channel
automatically.
16
EN
[DTV Manual Tuning]
For Digital TV operation
You can search DTV channel manually in your area.
2 Use Ÿ / ź to select [DTV Manual Tuning], then
press OK.
3 Use Ż / Ź to select the channel you want, then
press OK to start scanning.
< For DVB-C scanning >
[CADTV Manual Tuning]
For Digital TV operation
You can search CADTV channel manually in your area.
2 Use Ÿ / ź to select [CADTV Manual Tuning],
then press OK.
3 Use Ÿ / ź to select [Frequency] and press OK,
then use Ÿ / ź to adjust.
4 Use Ÿ / ź to select [Symbol(ks/s)] and press
OK, then use Ÿ / ź to adjust.
5 Use Ÿ / ź to select [QAM Type] and press OK,
then use Ÿ / ź to select the type.
6 After the settings, press OK to start scanning.
[Programme Edit]
For Digital TV operation
You can edit the programme settings.
2 Use Ÿ / ź to select [Programme Edit], then
press OK to show programme edit list.
Delete channels : [Delete]
3 Use Ÿ / ź to select the channel you want,
then press RED to delete the current channel.
Setting unshown channels : [Skip]
3 Use Ÿ / ź to select the channel you want,
then press BLUE to set the current channel as
unshown channel.
Setting favourite channels : [Fav]
Using Favourite function. Refer to “Favourite” (p. 7).
3 Use Ÿ / ź to select the channel you want,
then press FAV to set the current channel as
favourite.
Switching channel number : [Move]
You can switch the current programme with the other
channel number.
3 Use Ÿ / ź to select the channel you want,
then press YELLOW, and use the Number
buttons to enter the other channel number you
want to set, then press OK.
New channel number : [Move]
You can place the current programme to new
channel number.
3 Use Ÿ / ź to select the channel you want,
then press YELLOW, and use the Number
buttons to enter the unused channel number
you want to set, then press OK.
If you set [Lock System] to [On], you have to enter the 6-
digit PIN code you set using the Number buttons.
CADTV Manual Tuning
474.000 MHz
6900
QAM 16
Frequency
Symbol(ks/s)
QAM Type
NO SIGNAL
Bad GoodNormal
You can check favourite channel list at “Favourite” (p. 7).
17
EN
[Schedule List]
For Digital TV operation
You can see the detailed channel information and
reserve TV programme.
2 Use Ÿ / ź to select [Schedule List], then press
OK to display the list.
Add new reservasion
3 Press YELLOW to display reservation menu.
4 Use Ÿ / ź to select service selection, use Ż / Ź
to select the service you want.
5 Use Ÿ / ź to select [Type], use Ż / Ź to select
[Reminder] or [Recorder].
6 Use Ÿ / ź to select [Mode], use Ż / Ź to select
[Once], [Everyday] or [Weekly].
7 Use Ÿ / ź to select [Start Time], use Ż / Ź to
select the date/time and use Ÿ / ź to adjust.
8 Use Ÿ / ź to select [End Time], use Ż / Ź to
select the date/time and use Ÿ / ź to adjust.
9 After the adjustment, press OK to save it.
Delete a reservation
3 Use Ÿ / ź to select the item you want in
[Schedule List], and then press RED to delete
the reservation.
Edit a reservation
3 Use Ÿ / ź to select the item you want in
[Schedule List], and then press BLUE to edit
the reservation.
[Signal Information]
For Digital TV operation
You can see the detail information about the signal.
2 Use Ÿ / ź to select [Signal Information], then
press OK to display the detail.
[CI Information]
For Digital TV operation
You can see the detail information about the Common
Interface, if you have inserted the CI card.
2 Use Ÿ / ź to select [CI Information], then press
OK to display the detail.
[Once] : on any day you choose, up to 12 months
away
[Everyday] : at the same time on the same channel
every day
[Weekly] : at the same time on the same channel
every week; for example, every Monday
To edit a reservation, refer to "Add new reservasion".
Schedule List
Delete EditAddMove
Exit
[6% Used]
01:05:01 Jan
1/1
30/01/2013
Today’s news
Movie: The player
Programme Title Date
1 30/01/2013
2
01:08:31 (00:01:20)
Movie: The player
01:08:31 (00:01:20)
A player starts his carrer in new
school. He founds great competitions
and face off against them. He gets
better rapidly and his team will make
the legend...
Schedule Setup
40 B_LCN40d
Type
Reminder
Mode
Everyday
Start Time
01:06 01 Jan
End Time 01:06 01 Jan
Modulation: QAM 64
BackSelect
We do not guarantee the all cards can be supported on this
unit.
Signal Information
Channel: 21 (474.00MHz)
Quality: 100
Strength: 100
Network: NEOTION NETWORK
Modulation: QAM 64
18
EN
PC Settings
You can adjust the PC screen position, size and phase.
1 Use Ż / Ź to select [SCREEN].
[Auto Adjust]
Each setting will be adjusted automatically.
2 Use Ÿ / ź to select [Auto Adjust], then press
OK.
[H-Offset] / [V-Offset] / [Size] / [Phase]
Each setting can be adjusted manually.
2 Use Ÿ / ź to select the item you want, then
adjust the settings according to your personal
preference.
[Position Reset]
2 Use Ÿ / ź to select [Position Reset], then press
OK.
Picture Adjustment
You can adjust the picture settings according to your
personal preference.
These settings are automatically stored after exiting
the picture menu.
1 Use Ż / Ź to select [PICTURE].
[Picture Mode]
Each setting will be adjusted manually.
2 Use Ÿ / ź to select [Picture Mode], then press
OK.
3 Use Ÿ / ź to select [Dynamic], [Standard],
[Mild] or [Personal], then press OK.
Before you begin
You must connect your PC to this unit and select [PC]
at [Input Source]. Refer to “Switching the Input
Source Mode” (p. 9).
[H-Offset] : horizontal picture adjustment
[V-Offset] : vertical picture adjustment
[Size] : clock adjustment
[Phase] : phase adjustment
After press OK and appear the settings display, you can
adjust them.
SCREEN
Move SelectReturn Exit
Auto Adjust
H-Offset
V-Offset
Size
Phase
Position Reset
50
50
69
50
[Dynamic] :higher contrast
[Standard] : standard
[Mild] : lower contrast
[Personal] : manual setting
You can change picture mode easily using PICTURE
MODE.
Press PICTURE MODE repeatedly to select picture mode
you want. In this function, you can set also assign the
picture mode individually to each input mode.
Move SelectReturn Exit
Picture Mode
Contrast
50
Brightness 50
Colour
50
Tint
Sharpness
Backlight
Colour Temp
Noise Reduction
PICTURE
Standard
Normal
50
30
40
Middle
20
EN
[Treble] / [Bass] / [Balance]
You can set left / right speaker setting.
2 Use Ÿ / ź to select the item you want, then
press OK, and then appear the setting display,
adjust the setting, using Ż / Ź.
[SPDIF Mode]
If this unit is connected with coaxial digital audio
output jack to your device, you can set this mode.
2 Use Ÿ / ź to select [SPDIF Mode], then select
[PCM], [Auto] or [Off], using Ż / Ź.
[AD Switch]
For Digital TV operation
You can adjust audio output setting and volume for
visually impaired.
2 Use Ÿ / ź to select [AD Switch], then select
[On] or [Off], using Ż / Ź.
.
Time Settings
You can change Time setting.
1 Use Ż / Ź to select [TIME].
[Clock]
For Digital TV operation
[Clock] will change with the area which you have
selected in the Time Zone.
[Time Zone]
You can set the time zone according to the resident
area.
2 Use Ÿ / ź to select [Time Zone], then press OK.
3 Use Ÿ / ź / Ż / Ź to select the time you want,
then press OK.
[Treble] : high pitched tone adjustment
[Bass] : low pitched tone adjustment
[Balance] : volume balance setting for left and right
speakers
You can adjust [Treble] and [Bass] settings, if you set
[Personal] in [Sound Mode].
[PCM] :
The SPDIF output is PCM format, regardless
of the input sound format.
[Auto] : The SPDIF output is the same with the input
sound format.
[Off] : Turn OFF the SPDIF output.
Only MPEG sound is available for this function.
It is not available to adjust the time.
Move SelectReturn Exit
Clock
Time Zone
Sleep Timer
Auto Standby
OSD Timer
20 / Jan 13:12
Berlin GMT+1
Off
4 H
15 S
TIME
21
EN
[Sleep Timer]
The sleep timer can be set the unit to go to the standby
mode after an incremental period of time.
2 Use Ÿ / ź to select [Sleep Timer], then press
OK.
3 Use Ÿ / ź to select the time you want, then
press OK.
[Auto Standby]
You can set the time to go into standby mode
automatically as no activity is detected after power is
turned on.
In spite of this setting, the unit goes into standby mode
automatically if there is no signal input from the
antenna terminal and no user operation for 15 minutes.
2 Use Ÿ / ź to select [Auto Standby], then press
OK.
3 Use Ÿ / ź to select the time you want, then
press OK.
[OSD Timer]
You can set the OSD displaying time during no activity
is detected after press MENU.
2 Use Ÿ / ź to select [OSD Timer], then press
OK.
3 Use Ÿ / ź to select the time you want, then
press OK.
Lock Settings
You can set following lock settings.
1 Use Ż / Ź to select [LOCK].
[Lock System]
You can set all lock settings.
If you set to [On], all lock settings work.
2 Use Ÿ / ź to select [Lock System], then press
OK to set to [On].
3 Use the Number buttons to enter the 6-digit PIN
code you set.
You can set also SLEEP button on Remote Control, refer to
“Sleep Timer” (p. 8).
Before you change the lock settings
You must remember your own PIN code.
Every lock settings need PIN code.
If you have not set up your PIN code, enter 111111.
When you enter correct PIN code, you can change following
settings.
After you move to other settings, you have to enter your PIN
code again to proceed Parental setting.
If you set to [On], below settings need to enter PIN code
due to change the settings.
: [Auto Tuning], [ATV Manual Tuning], [DTV Manual
Tuning], [Programme Edit], [First Time Installation] and
[Reset].
Move SelectReturn Exit
Lock System
Set Password
Block Program
Key Lock
Hotel Mode
Parental Guidance
Off
Off
LOCK
22
EN
[Set Password]
You can set your own PIN code.
2 Use Ÿ / ź to select [Set Password], then press
OK.
3 Use the Number buttons to enter the 6-digit PIN
code you set.
4 Use the Number buttons to enter the new 6-digit
number.
5 Use the Number buttons to enter the same
6-digit number again.
[Block Program]
2 Use Ÿ / ź to select [Block Program], then
press OK.
3 Press GREEN to lock the current channel.
[Parental Guidance]
You can set the parental rating to avoid watching an
inappropriate programme for your children.
2 Use Ÿ / ź to select [Parental Guidance], then
press OK.
3 Use Ÿ / ź to select the age restriction, then
press OK.
[Key Lock]
You can set [Key Lock] and unlock with PIN code.
2 Use Ÿ / ź to select [Key Lock], then select [On]
or [Off], using Ż / Ź.
[Hotel Mode]
2 Use Ÿ / ź to select [Hotel Mode], then press
OK to enter [Hotel Mode] menu.
To unlock programme, input the PIN code you set.
Please enter old password
Please enter new password
Confirm new password
Clear Cancel
If you set to [On], you cannot use the buttons on the unit.
Refer to “Hotel Mode Settings” (p. 26).
23
EN
Setup Adjustment
You can change other setting.
1 Use Ż / Ź to select [SETUP].
[OSD Language]
You can select the preferred on-screen language.
2 Use Ÿ / ź to select [OSD Language], then
press OK.
3 Use Ÿ / ź / Ż / Ź to select the language you
want, then press OK.
[TT Language]
You can select the preferred teletext language.
2 Use Ÿ / ź to select [TT Language], then press
OK.
3 Use Ÿ / ź / Ż / Ź to select the language you
want, then press OK.
[Audio Languages]
You can select the preferred audio language.
2 Use Ÿ / ź to select [Audio Languages], then
press OK.
3 Use Ÿ / ź / Ż / Ź to select the language you
want, then press OK.
[Subtitle Language]
You can select the preferred subtitle language.
2 Use Ÿ / ź to select [Subtitle Language], then
press OK.
3 Use Ÿ / ź / Ż / Ź to select the language you
want, then press OK.
[Hearing Impaired]
You can set Hearing Impaired mode.
2 Use Ÿ / ź to select [Hearing Impaired], then
select [On] or [Off] using Ż / Ź.
[Hearing Impaired]:
Provides audio service for hearing impaired.
[PVR File System]
You can check the USB speed.
2 Use Ÿ / ź to select [PVR File System], then
press OK.
You can set also buttons on Remote Control, refer to
“Teletext Settings” (p. 8).
Move SelectReturn Exit
SETUP
OSD Language
TT Language
Audio Languages
Subtitle Language
First Time Installation
Reset
Software Update(USB)
HDMI CEC
Hearing Impaired
PVR File System
Aspect Ratio
Off
16:9
24
EN
[Aspect Ratio]
Display modes can be selected when your TV receives
a 16:9 or 4:3 video signal. Three types of display
modes can be selected for a PC Input signal.
2 Use Ÿ / ź to select [Aspect Ratio], then press
OK.
3 Use Ÿ / ź to select the TV screen display mode
you want, then press OK.
For 16:9 video signal
For 4:3 video signal
For PC Input signal
You cannot set screen display mode in playback mode.
[Auto]
: Displays a proportionally stretched picture
automatically.
*DTV, ATV, AV, SCART only
[4:3]
: Displays a 16:9 picture at a 4:3 size.
The picture is shortened horizontally. Sidebars
appear on both edge of the TV screen.
[16:9]
: Displays a 16:9 picture at its original size.
[Zoom1]
: Displays a picture at its enlarged size without
changing its horizontal and vertical ratio. This
crops out all sides of the picture.
[Zoom2]
: Displays a picture at its enlarged bigger size
without changing its horizontal and vertical ratio.
This crops out all sides of the picture.
[Full Screen]
: Displays a picture at its original size.
*DTV, HDMI only
[Auto]
: Displays a proportionally stretched picture
automatically.
*DTV, ATV, AV, SCART only
[4:3]
: Displays a 4:3 picture at its original size.
Sidebars appear on both edge of the TV screen.
[16:9]
: Displays a 4:3 picture at a 16:9 size; the picture
is stretched more horizontally.
[Zoom1]
: Displays a 4:3 picture at a 16:9 size; at its
enlarged size without changing its horizontal
and vertical ratio. This crops out all sides of the
picture.
[Zoom2]
: Displays a 4:3 picture at a 16:9 size. At its
enlarged size bigger than
[Zoom1]
without
changing its horizontal and vertical ratio. This
crops out all sides of the picture.
[Full Screen]
: Displays a picture at its original size.
*DTV, HDMI only
[4:3]
: Displays a picture at a 4:3 size. Sidebars appear
on both edges of the TV screen.
[16:9]
: Displays a picture at a 16:9 size; the picture is
stretched more horizontally.
This unit can also be connected to your PC that has a DVI
terminal. Use an HDMI-DVI conversion cable for this video
connection and it requires stereo mini plug conversion
cable for analog audio signal as well.
Refer to 16:9 video signal on this page if PC has HDMI
Output.
PC resolution standards: 753P series - 1920 x 1080
553/553P series - 1360 x 768
For details, refer to “Input Resolution” (p. 32)
[4:3] [16:9][Auto]*
[Zoom2] [Zoom1][Full Screen]*
[16:9][4:3]
25
EN
[First Time Installation]
You can set initial setup again. Refer to “INITIAL
SETUP” (p. 6).
2 Use Ÿ / ź to select [First Time Installation],
then press OK.
3 Follow steps 2 to 10 in “INITIAL SETUP” (p. 6).
[Reset]
You can restore the all settings except channel setting
and parental lock settings.
2 Use Ÿ / ź to select [Reset], then press OK.
3 Press Ż to select [Yes] to reset to default
settings.
[Software Update(USB)]
It is available to update software using USB.
2 Use Ÿ / ź to select [Software Update(USB)],
then press OK.
[HDMI CEC]
This function allows you to operate the linked functions
between devices with HDMI CEC feature and this unit
connecting through an HDMI cable.
[HDMI CEC]
If you set to [On], HDMI CEC function allows your
device to act in conjunction with this unit.
2 Use Ÿ / ź to select [HDMI CEC], and then
select [On] or [Off], using Ż / Ź.
[Auto Power]
If you set to [On], when your device turns on, this
unit also turns on automatically.
2 Use Ÿ / ź to select [Auto Power], and then
select [On] or [Off], using Ż / Ź.
[Device Menu]
You can see the device title menu of your device.
2 Use Ÿ / ź to select [Device Menu], then
press OK to display the detail.
After you select [Yes], the unit go into standby and turns on
automatically.
Your device must be compatible with HDMI CEC in order to
use this function.
We do not guarantee the all devices can be supported on
this unit.
26
EN
Hotel Mode Settings
You must enter [Lock System] due to proceed Hotel
Mode setting. For details, refer to “Lock Settings”
(p. 21).
1 Use Ż / Ź to select [LOCK].
2 Use Ÿ / ź to select [Lock System], then press
OK.
3 Use the Number buttons to enter the 6-digit PIN
code you set.
[Hotel Mode]
4 Use Ÿ / ź to select [Hotel Mode], then press
OK to enter [Hotel Mode] menu.
5 Use Ÿ / ź to select [Hotel Mode], then press Ż
/ Ź to select [On] to adjust following settings.
[Source Lock]
You can lock the source one by one. If you set to [On],
the source does not appear on the display.
5 Use Ÿ / ź to select [Source Lock], then press
OK.
6 Use Ÿ / ź to select the source you want, then
press OK to set to [On].
[Default Source]
You can set the first displaying source as the unit turns
on.
5 Use Ÿ / ź to select [Default Source], then
press OK.
6 Use Ÿ / ź to select the source you want, then
press OK to set the default.
[Default Prog]
If you set [ATV] in [Default Source], you can set the
the first displaying ATV programme number as the unit
turns on.
5 Use Ÿ / ź to select [Default Prog], then press
OK.
6 Use Ÿ / ź to select the programme you want,
then press OK to set the default.
[Default Volume]
You can set default audio volume as the unit turns on.
5 Use Ÿ / ź to select [Default Volume], then
press Ż / Ź to adjust the audio volume.
Move SelectReturn Exit
Lock System
Set Password
Block Program
Key Lock
Hotel Mode
Parental Guidance
Off
Off
LOCK
Move SelectReturn Exit
Hotel Mode
Source Lock
Default Source
Import Database
Export Database
Clear Lock
Default Volume
Max Volume
Default Prog
On
100
Off
Off
1
HOTEL
ATV
AV
YPbPr
HDMI1
HDMI2
Off
Off
Media
Off
HDMI3 / MHL Off
HDMI
Off
SCART
PC
Off
Off
Off
Off
Off
Off
SOURCE LOCK
Move SelectReturn Exit
DTV Off
27
EN
[Max Volume]
You can set maximum limit of audio volume.
5 Use Ÿ / ź to select [Max Volume], then press Ż
/ Ź to adjust the audio volume.
[Import Database]
You can import the Hotel Mode settings from USB flash
memory.
5 Use Ÿ / ź to select [Import Database], then
press OK.
[Export Database]
You can export the current menu settings to USB flash
memory.
5 Use Ÿ / ź to select [Export Database], then
press OK.
[Clear Lock]
You can restore the Hotel Mode settings.
5 Use Ÿ / ź to select [Clear Lock], then press
OK.
If you set to [On] in [Lock System], you cannot turn the
volume up over setup volume.
After importing, the unit will go into the standby mode
automatically.
If a USB flash memory does not insert, an error message
will appear.
During exporting, LED on front panel will turn into red. (It’ll
take about 5 - 10sec.)
After exporting, no message will appear.
It takes about 10 seconds to complete the exporting the
data.
If a USB flash memory does not insert, an error message
will appear.
28
EN
TROUBLESHOOTING GUIDE
Sometimes a performance problem can be easily solved by checking seemingly apparent but often overlooked
possibilities. Before arranging for service, check these items. It could save you time and money.
Problem Possible Remedy
Remote control does not work
Is unit plugged in?
Power at outlet?
Check batteries in remote control.
Bars on TV screen
If outside antenna is being used, check for broken wire.
Check for local interference.
Picture distorted
Try a new channel, if OK, then possibly due to poor channel reception.
If outside antenna is being used, check for broken wire.
Surrounding temperature is too low.
Picture rolls vertically
Try a new channel, if OK, then possibly due to poor channel reception.
If outside antenna is being used, check for broken wire.
Check for local interference.
No colour
Try a new channel, if OK, then possibly due to poor channel reception.
Is antenna connected to terminal on the back of the unit?
If outside antenna is being used, check for broken wire.
Adjust [Colour] control.
Ghosts in picture
or
Poor reception on some channels
Try a new channel, if OK, then possibly due to poor channel reception.
Is antenna connected to terminal on the back of the unit?
If outside antenna is being used, check for broken wire.
Check for local interference.
Weak picture
Try a new channel, if OK, then possibly due to poor channel reception.
Is antenna connected to terminal on the back of the unit?
If outside antenna is being used, check for broken wire.
Adjust [Contrast] and [Brightness] control.
Surrounding temperature is too low.
Lines or streaks in picture
Try a new channel, if OK, then possibly due to poor channel reception.
If outside antenna is being used, check for broken wire.
Check for local interference.
Picture blurred
Try a new channel, if OK, then possibly due to poor channel reception.
If outside antenna is being used, check for broken wire.
Sound OK, picture poor
Try a new channel, if OK, then possibly due to poor channel reception.
Is antenna connected to terminal on the back of the unit?
If outside antenna is being used, check for broken wire.
Check for local interference.
Adjust [Contrast] and
[Brightness] control.
Picture OK, sound poor
Try a new channel, if OK, then possibly due to poor channel reception.
Check for local interference.
No picture or sound
Try a new channel, if OK, then possibly due to poor channel reception.
Is unit plugged in?
Power at outlet?
Is unit’s power on?
Is antenna connected to terminal on the back of the unit?
If outside antenna is being used, check for broken wire.
Unplug the AC power cord and wait for about 1 minute, then plug the AC
power cord and turn on the unit again.
Different colour marks on TV
screen
Try a new channel, if OK, then possibly due to poor channel reception.
29
EN
Black or luminous point on TV
screen
It is quality of the LCD Panel.
Problem Possible Remedy
30
EN
SPECIFICATIONS
Terminals
Panel size
46.0 inches / 116.80cm (46FD753P)
38.6 inches / 98.04cm (39FL753P)
31.5 inches / 80.01cm (32FL553P, 32FL553)
28.5 inches / 72.39cm (29FL553P, 29FL553)
23.6 inches / 59.94cm (24FL553P, 24FL553)
Television system DVB-T/C(MPEG2/MPEG4-H.264), PAL-B/G, D/K, SECAM-B/G, D/K, L
Sound output
10 W, 8 ȍ × 2 (46FD753P)
8 W, 8 ȍ × 2 (39FL753P)
8 W, 8 ȍ × 2 (32FL553P, 32FL553)
8 W, 8 ȍ × 2 (29FL553P, 29FL553)
5 W, 8 ȍ × 2 (24FL553P, 24FL553)
Remote control Digital encoded infrared light system
Operating temperature 0 °C to 40 °C
Power requirements AC 220-240 V ~ , 50 Hz
Power consumption
- Energy class A
90 W / stand by: less than 0.5W (46FD753P)
62 W / stand by: less than 0.5W (39FL753P)
52 W / stand by: less than 0.5W (32FL553P)
44 W / stand by: less than 0.5W (32FL553)
50 W / stand by: less than 0.5W (29FL553P)
42 W / stand by: less than 0.5W (29FL553)
35 W / stand by: less than 0.5W (24FL553P)
30 W / stand by: less than 0.5W (24FL553)
Antenna UHF/VHF 75 ȍ
Audio input RCA jack x 2 (L/R)
Composite video input RCA jack ×1
Component video input RCA jack ×3 (Y/Pb/Pr)
HDMI input (19 pin) HDMI x 2
HDMI input (with MHL function) HDMI x 1 (46FD753P, 39FL753P, 32FL553P, 29FL553P, 24FL553P)
PC input D-Sub 15pin x 1 (RGB) / Mini jack Ø3.5 mm x 1 (Audio)
SCART SCART x 1
Headphone audio output Mini jack Ø3.5 mm x 1
Coaxial digital audio output RCA jack × 1
31
EN
Protruding parts excluded.
USB terminal
USB × 1
Common Interface CI slot × 1
Dimensions
without base
H: 657.5 mm / W: 1088.8 mm / D: 122.0 mm (46FD753P)
H: 542.0 mm / W: 912.0 mm / D: 60.0 mm (39FL753P)
H: 451.5 mm / W: 754.6 mm / D: 57.0 mm (32FL553P, 32FL553)
H: 412.0 mm / W: 686.5 mm / D: 57.0 mm (29FL553P, 29FL553)
H: 350.8 mm / W: 576.9 mm / D: 53.7 mm (24FL553P, 24FL553)
Dimensions
with base
H: 707.9 mm / W: 1088.8 mm / D: 270.3 mm (46FD753P)
H: 587.5 mm / W: 912.0 mm / D: 214.0 mm (39FL753P)
H: 494.7 mm / W: 754.6 mm / D: 180.0 mm (32FL553P, 32FL553)
H: 456.0 mm / W: 686.5 mm / D: 180.0 mm (29FL553P, 29FL553)
H: 389.4 mm / W: 576.9 mm / D: 139.8 mm (24FL553P, 24FL553)
Weight
without base
12.40 kg (46FD753P)
8.68 kg (39FL753P)
5.61 kg (32FL553P, 32FL553)
4.80 kg (29FL553P, 29FL553)
3.35 kg (24FL553P, 24FL553)
Weight
with base
14.40 kg (46FD753P)
10.00 kg (39FL753P)
5.85 kg (32FL553P, 32FL553)
5.04 kg (29FL553P, 29FL553)
3.53 kg (24FL553P, 24FL553)
32
EN
Input Resolution
HD models: 32FL553P/32FL553/29FL553P/29FL553/24FL553P/24FL553
Full HD models: 46FL753P/39FL753P
Multimedia Format
YPbPr IN
(Component video)
PC(VGA) IN
HD models
PC(VGA) IN
Full HD models
Resolution Resolution Refresh rate Resolution Refresh rate
480i/p 640 x 480 60Hz / 72Hz / 75Hz 640 x 480 60Hz / 72Hz / 75Hz
576i/p 720 x 400 70Hz 720 x 400 70Hz
720p 800 x 600 60Hz / 72Hz / 75Hz 800 x 600 60Hz / 72Hz / 75Hz
1080i 1024 x 768 60Hz / 70Hz / 75Hz 1024 x 768 60Hz / 70Hz / 75Hz
HDMI
1280 x 768 60Hz / 75Hz 1280 x 768 60Hz / 75Hz
Resolution Refresh rate
1280 x 800 60Hz 1280 x 800 60Hz
480i/p 60Hz 1360 x 768 60Hz 1280 x 960 60Hz
576i/p 50Hz 1280 x 1024 60Hz
720p 50Hz / 60Hz 1360 x 768 60Hz
1080i/p 50Hz / 60Hz 1680 x 1050 60Hz
1080p 24Hz 1920 x 1080 60Hz
[PHOTO]
File Ext. Codec Remark
.jpg/.jpeg
Progressive JPEG Max Resolution: 1024 x 768
Baseline JPEG Max Resolution: 8192 x 8192
[MUSIC]
File Ext. AUDIO Codec Remark
.mp3 MP3
Sample rate: 32k - 48kHz
Bit rate: 32k - 320kbps
Channel: Mono / Stereo
[MOVIE]
Container VIDEO Codec AUDIO Codec Max Resolution
.avi
H.264
MP3, Dolby Digital, AAC 1920 x 1080
.mkv
.mov
.mp4
H.264
MPEG 2 MP3, Dolby Digital, AAC 720 x 576
File system
File Format
Format FAT32 / FAT16
A39Q1EP/A33T1EP/A33F1EP/A33F0EP/A33M1EP/A33M0EP/A33L1EP/A33L0EP
★★★★★
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Funai 24FL553P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Funai 24FL553P in the language / languages: English as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Funai 24FL553P

Funai 24FL553P User Manual - German - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info