560261
12
Zoom out
Zoom in
Previous page
1/87
Next page
Important notes
Additional safety notes for devices with radio components
Switch off the radio components (the ON/OFF switch must be in the "OFF" position) when you
are at an airport or driving in a car.
Switch off the radio components (the ON/OFF switch must be in the "OFF" position) when you
are in a hospital, an operating room or near a medical electronics system. The transmitted
radio waves can impair the operation of medical devices.
Switch off the radio components (the ON/OFF switch must be in the "OFF" position), when you
take the device close to flammable gases or into hazardous environments (e.g. petrol station,
paintshops), as the transmitted radio waves can cause an explosion or a fire.
The range of the radio connection is dependent on environmental and ambient conditions.
With data traffic via a wireless connection, it is also possible for unauthorised third parties to
receive data.
Fujitsu Siemens Computers GmbH cannot be held responsible for radio or television faults arising
from unauthorised modifications made to this device. Fujitsu Siemens Computers GmbH is,
furthermore, not responsible for replacing and / or exchanging connector cables and devices which
have not been specified by Fujitsu Siemens Computers GmbH. The user bears sole responsibility for
repairing faults arising from such unauthorised modifications made to a device and for replacing
and/or exchanging devices.
Notes on installing and removing boards and components
Only qualified technicians should repair the device. Unqualified users who open the
notebook’s case expose themselves to electric shock and fire hazards.
!
Boards with electrostatic sensitive devices (ESD) are marked with the label shown.
When handling boards fitted with ESDs, you must always observe the following points:
You must statically discharge yourself before working on the boards (e.g. by touching an
earthed object).
The equipment and tools you use must be free of static charges.
Pull out the power connector and remove the battery before you install or remove boards.
Always hold boards with ESDs by their edges.
Never touch pins or conductors on boards fitted with ESDs.
4 A26391-K222-Z121-1-7619, edition 2
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujitsu STYLISTIC ST5111 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujitsu STYLISTIC ST5111 in the language / languages: English as an attachment in your email.

The manual is 1,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fujitsu STYLISTIC ST5111

Fujitsu STYLISTIC ST5111 Quick start guide - German - 91 pages

Fujitsu STYLISTIC ST5111 Quick start guide - French - 87 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info