Manual Fujitsu-siemens Scaleo 800 (page 52 of 96) (English)

531677

Zoom out

Zoom in

1/96

5. Enter the SSID in the "Network name (SSID)" field of the

device to which the connection is to be established. The

network names (SSID) can be obtained from the operator of

the receiver.

If the connection requires data encoding, activate the function

"Data encoding" and enter the required key in the "Network

key" field.

6. Click on "OK".

To connect two WLAN devices with each other in ad-hoc mode,

execute the specified steps for both devices and enter the same

SSID in this window. Activate the function "This is a computer-to-

computer network; wireless access points are not used". Click

on "OK".

This display will appear in the task bar next to the clock after

successful connection:

The signal strength displayed may vary due to external influences.

If you double click on the active connection (both screens in the

task bar), a window containing status information will appear. This

may differ depending on the network setup.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fujitsu-siemens Scaleo 800 in the language / languages: English as an attachment in your email.

The manual is 4,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fujitsu-siemens Scaleo 800 Manual

Product: