Manual Fujitsu-siemens Scaleo 600 (page 92 of 96) (English)

531676

Zoom out

Zoom in

1/96

Removing the slot cover

when slot cover screwed in place

• Loosen the screws on the slot cover in question and

remove the cover.

• Install the expansion module in accordance with the

manufacturer’s instructions.

• Fix the module in place with the screws from the slot cover.

• Follow the opening process in reverse to close the PC.

where slot cover pre-punched

• Insert a slot screwdriver in the crack visible from above

and turn inwards with gentle pressure to loosen the slot

cover, then pull off with a set of flat nose pliers. Any loose

metal cuttings are to be removed.

5. Install the expansion module in accordance with the module

manufacturer’s instructions.

6. Follow the opening process in reverse to close the PC.

7. Configure the BIOS setup if necessary (e.g. IRQ).

8. Install the required driver for the expansion module.

CAUTION! There is a risk of injury when installing and removing

modules due to sharp edges caused by pulling off the

slot cover.

• If you wish to remove the retrofitted module at a later

date, please close the resulting opening immediately

with a slot cover available from a specialist supplier.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fujitsu-siemens Scaleo 600 in the language / languages: English as an attachment in your email.

The manual is 4,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fujitsu-siemens Scaleo 600 Manual

Product: