213037
39
Zoom out
Zoom in
Previous page
1/212
Next page
Chapter 2 Loading Documents
39
Index
Appendix
Introduction
Glossary
Contents
TOP
Loading
Documents
How to Use
ScandAll PRO
Scan Pa-
rameters
Various
Documents
Daily Care
Trouble-
shooting
Operational
Settings
Consumables
Scanner
Overview
This section describes how to load documents on the ADF.
1 Align the edge of your document.
1 Confirm that all the document sheets have the same width.
2 Check the number of sheets in the document stack.
The following is a guideline for the limits on loadable sheets:
A4/Letter-size paper or smaller that makes a document stack
of 20 mm (0.79 in.) or less (200 sheets with paper weight of
80 g/m
2
(21 lb))
A4/Letter-size paper or larger that makes a document stack
of 10 mm (0.39 in.) or less (100 sheets with paper weight of
80 g/m
2
(21 lb))
For details, refer to "Maximum Document Loading Capacity" (on
page 44).
2 To avoid sticky edges, fan the document as follows:
1 Hold both ends of the document, and bend the document stack
into an arch.
2 Firmly holding the document with both hands, bend it back so that
the bent section rises up in the middle of the document as follows.
3 Repeat Steps 1 to 2 twice or three times.
4 Turn the document stack by 90 degree, and then fan it in the differ-
ent orientation again.
5 Align the edge of the document.
3 Load the document on the ADF Paper Chute.
Load it face down on the ADF Paper Chute.
2.1 Loading Documents on the ADF
Refer to "2.2 ADF-Loaded Documents" (on page 42) for
information about the required document sizes and paper
quality for ensuring correct operation when scanning
documents from the ADF.
Refer to "2.3 Changing the ADF Position (Flatbed Type
Only)" (on page 48) for how to change the ADF position
(Flatbed type only).
For details of how to fan documents, refer to the Error
Recovery Guide.
You can find the Error Recovery Guide in the SETUP
DVD-ROM. For how to install the Error Recovery Guide,
refer to "Chapter 4 Installing the Scanner Software" in the
Getting Started.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujitsu-siemens fi 6670 document scanner at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujitsu-siemens fi 6670 document scanner in the language / languages: English as an attachment in your email.

The manual is 13,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fujitsu-siemens fi 6670 document scanner

Fujitsu-siemens fi 6670 document scanner Installation Guide - English - 2 pages

Fujitsu-siemens fi 6670 document scanner Quick start guide - English - 26 pages

Fujitsu-siemens fi 6670 document scanner Installation Guide - German, French, Italian, Spanish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info