Manual Fujitsu-siemens fi-6240Z (page 43 of 211) (English)

560215

Zoom out

Zoom in

1/211

Contents

Index

Chapter 2 How to Load Documents

Appendix

Glossary

Introduction

TOP

Configuring the

Scan Settings

How to Use the

Operator Panel

Various Ways to

Scan

Daily Care

Troubleshooting

Operational

Settings

Replacing the

Consumables

Scanner

Overview

How to Load

Documents

！！！

z When you scan plastic cards, take note of the following.

- Up to three plastic cards can be loaded in the ADF paper

chute.

Note that you can only load one card at a time if the

plastic card is embossed.

- It is recommended to place the card face-down in the

ADF paper chute.

- Cards should be within the following specifications:

ISO7810 ID-1 type compliant

Make sure to check if the card can be scanned first.

*1: Up to 1.25 mm is supported for scanning at 200 dpi (60

ppm) in landscape when using fi-6140Z/fi-6240Z. This

setting can be changed in the Software Operation Panel

to scan plastic cards with a thickness up to 1.4 mm. For

details, refer to " Scanning Thick Plastic Cards [Feed

Mode] (fi-6140Z/fi-6240Z)" (page 179).

- Rigid cards may not be fed properly.

- If the surface of the card is dirty with grease marks (e.g.

fingerprints) and such, perform scanning after wiping the

dirt off.

BACKBACK

Size : 85.6 × 53.98 mm

Thickness : 1.4 mm or less (*1)

Material : PVC (polyvinyl chloride) or PVCA (polyvinyl

chloride acetate)

- Plastic cards cannot be scanned when the imprinter is

connected.

- Scanning thick documents such as plastic cards will be

falsely detected as multifeed. In that case, disable

multifeed detection.

z When scanning semi-transparent documents, increase the

brightness for scanning to avoid bleed-through.

z When you scan documents written in lead pencil, make

sure to clean the rollers frequently. Otherwise, the rollers

will be contaminated which may leave black traces on the

document or cause feeding errors.

For details about cleaning, refer to "Chapter 6 Daily Care"

(page 108).

z If multifeeds, pick errors or paper jams occur frequently,

refer to "8.3 Troubleshooting" (page 130).

z When you scan documents with the ADF, all documents

must be flat on the leading edge. Make sure that curls on

the leading edge of the documents are kept within the

following range.

30 mm or more

Feeding direction

3 mm

or less

5 mm

or less

30 mm or more

Feeding direction

(0.20 in.)

(0.12 in.)

(1.18 in.)

Leading edgeLeading edge

Scanned side Scanned side

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fujitsu-siemens fi-6240Z in the language / languages: English as an attachment in your email.

The manual is 18,25 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fujitsu-siemens fi-6240Z Manual

Product: