510510
74
Zoom out
Zoom in
Previous page
1/149
Next page
58
Feed and Eject rollers
1) Open the ADF when the indication of the Function Number display is not "P" or
"0".
If you open the ADF when the indication of the Function Number display is "P" or
"0", the Feed rollers / Eject rollers will not rotate even you perform the operation
of step 2) below.
2) Simultaneously hold down the "Send to" and "Scan" buttons on the operator panel.
The Feed rollers / Eject rollers start to rotate slowly.
3) Hold a soft, dry cloth moistened with cleaning fluid against the surface of the rotat-
ing Feed rollers / Eject rollers so that it lightly cleans the surface of the rollers.
As a guideline, 7 presses of the "Send to" and "Scan" buttons make the Feed rollers
/Eject rollers to rotate one full turn.
Plastic rollers
Clean the Plastic rollers lightly, not to roughen the roller surfaces. Take particular care in
cleaning these rollers as black debris on them adeversely affects the pickup performance.
Be careful not to damage the sponges beside the rollers.
Sheet guides
Clean lightly.
Glass
Clean lightly.
Ultra sonic sensor
Clean lightly with a dry cloth.
In step 2), the Feed rollers turn at the same time while
rotating the Eject rollers.
When cleaning the Eject rollers, be careful not to touch
the Feed rollers and vice versa.
ATTENTION
If the glass is dirty, vertical black streaks may apper in the scanned
images.
Function No.
display
Function
Send to
Scan
LED
Power button
74


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujitsu-siemens Fi-5950 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujitsu-siemens Fi-5950 in the language / languages: English as an attachment in your email.

The manual is 3,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info