Manual Fujitsu-siemens Fi-5950 (page 22 of 149) (English)

510510

Zoom out

Zoom in

1/149

1.2 Loading Documents on the ADF for Scanning

1. Align the edges of the documents.

1) Confirm that all the documents have the same width.

2) Check the number of the sheets in the document stack.

The standard number of sheets that can be loaded on the scanner is as follows:

• A4-size paper or smaller that makes a document stack of 10mm or less (100 sheets

at 80 g/m

or at 20 lb)

• Over A4-size paper that makes a document stack of 5mm or less (50 sheets at

80 g/m

or at 20 lb)

2. Fan the documents as follows:

1) Lightly grip both ends of the documents with both hands, and bend the documents as fol-

lows.

2) Hold the documents firmly with both hands and bend them back as follows so that the

bent section rises up in the middle of the stack as shown below.

3) Repeat steps 1) and 2) a couple of times.

4) Rotate documents 90 degrees, and fan again.

3. Align the top of the documents.

HINT

For details about document specifications for ADF, refer to Chapter6 "DOC-

UMENT SPECIFICATIONS FOR ADF" (page 101).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fujitsu-siemens Fi-5950 in the language / languages: English as an attachment in your email.

The manual is 3,22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fujitsu-siemens Fi-5950 Manual

Product: