510501
43
Zoom out
Zoom in
Previous page
1/61
Next page
Security functions
Setting supervisor and user password
Start the BIOS Setup Utility and go to the Security menu.
Select the Set Supervisor Passwo rd eld and press the Enter key.
With Enter new Password: you are asked to enter a password.
Enter the password and press the Enter key.
Conrm new Password requires you to conrm the password.
Enter the password again and press the Enter key.
Changes have been saved is a conrmation that the new password has been saved.
To set the user password, select Set User Passw ord and proceed exactly as
when conguring the supervisor password.
If you do not want to change any other settings, y ou can exit BIOS Setup Utility.
In the Exit menu, select the option Save Changes & Exit.
Select Yes and press the Enter key.
PasswordSupervisorpasswor
d
Userpassword
The notebook will be rebooted and the new password will come into effect. It will now be
necessary to rst enter your supervisor or user p assword in order to op en the BIOS Setup Utility.
Please note that the user password only provides access to a few of the BIOS settings.
Changing the supervisor or user password
You can only change the supervisor password when you have logged into the
BIOS Setup Utility with the supervisor password.
PasswordSupervisorpasswordUserpassword
Call the BIOS Setup Utility and go to the Security menu.
When changing the passw ord, proceed exactly as for password assignment.
Removing passwords
To remove a password (without setting a ne w password) perform the following steps:
PasswordSupervisor
password
Userpasswo
rd
Start the BIOS Setup Utility and go to the Security menu.
Highlight the Set Supervisor Password or Set User Password eld and press the Enter key.
You will be requested to enter the current password by the Enter Current Password prompt.
You will be requested to enter a new p assword by the Enter New Password prompt.
Press the Enter key tw ice.
In the Exit menu, select the option Save Changes & Exit.
Select Yes and press the Enter key.
The notebook will now reboot with the password removed.
Removing the supervisor password simultaneously de activates the user password.
Password protection for booting of the operating system
With the supervisor password you have set in
the BIOS Setup Utility (see
section "
Setting supervi sor and user pa ssw
ord", Page 35), you can also
prevent booting of the operating system.
Ope
rating system
AMILO Mini O perating Manual, edition 2 35
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujitsu Siemens Amilo Mini at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujitsu Siemens Amilo Mini in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fujitsu Siemens Amilo Mini

Fujitsu Siemens Amilo Mini User Manual - German - 65 pages

Fujitsu Siemens Amilo Mini User Manual - Dutch - 65 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info