172942

Fujitsu primergy tx150 torre Manual

102
Zoom out
Zoom in
Previous page
1/120
Next page
102 Operating Manual TX150 S7
Non-hot-plug components CSS components
8.2 Non-hot-plug components
V CAUTION!
● The actions described in this section may only be performed by
personnel with the appropriate technical training. (The device can be
seriously damaged if it is opened without authorization or if repairs
are attempted by untrained personnel.)
● Before installing/removing memory to/from the server, turn off the
server, all peripheral devices, and any other connected devices. Also
unplug all power cables from the outlet. Failure to do so can cause
electric shock.
● The circuit boards and soldered parts of internal options are exposed
and can be damaged by static electricity. Before handling them, first
touch a metal part on the server to discharge static electricity from
your body.
● Do not touch the circuitry on boards and soldered parts. Hold the
metallic areas or the edge of the circuit boards.
● Do not install unauthorized third party memory modules. Doing so
may cause electric shock, a fire, or failures.
● Wait for a sufficient period of time after server shutdown before
installing or removing memory modules. Failure to do so may cause
burns. When installing or removing memory modules, make sure to
remove the screws at the specified points only. Failure to do so may
cause injury. It may also cause failures.
● Touch only the specified part of the printed circuit board. Failure to do
so may cause injury. It may also cause failures.
● Do not insert and remove memory modules repeatedly. Doing so may
cause failures.
● If the memory module has not been correctly inserted, it may cause
a fire. Insert the memory module with attention to its direction.
● If a memory module is installed and you pull the Lever strongly
outwards, the memory module pops up. Doing so may cause a device
failure.
● Please observe the safety information in chapter "Important
information" on page 27.
… 102 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujitsu primergy tx150 torre at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujitsu primergy tx150 torre in the language / languages: English as an attachment in your email.

The manual is 2,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info