617313
85
Zoom out
Zoom in
Previous page
1/127
Next page
Security functions
Remote Access Enabling
F4
Requirement:
The device is centrally administered a s part of an Organ isation Unit and is registered in a System Lock
Admin database. The S martCard used for the group installation must have been initialised beforehand
using the SystemLock Admin.EXE Windows program (see "
SmartCard user groups", Page 73).
In order to enable "remote" access to a device for a user, or to grant one-time "remote"
access to a device for a guest or service technician, proceed as follows:
Start the de vice.
The prompt to Insert a SmartCard will appear.
Press the
F4
key.
The following dia
logue box will appear:
SmartCard SystemLock
Org Unit:
PC Group:
I-CODE 1:
I-CODE 2:
Company Department 1
Group 1
0123456789ABCDEF
0123456789ABCDEF
The user must then
contact the administrator or t he administration hotline and
inform them o f th
e data and codes displayed .
The administrator then species the type of the once-only access rights:
User
access
The user can boot the system once.
Service
access
The user has one-time access to the BIOS for service purposes, without
access to the SystemLock functions.
Admin
access
The user has access to the BIOS and the SystemLock functions, e.g. for
activating the device when the associated SmartCard has been lost.
An activation code will be generated that depends on the access rights granted;
this will be given to t he user by the H otline.
The user must now press the Enter key on the PC to be activated, enter the rst half (Code
1) of the activation cod e and conrm the entry by pressing Enter. Th e dialogue box for
entering the se con d half (Code 2) of the activation code will appear. If an incorrect entry
is made, there is no limit to the nu mber of times the process can be repeated.
When all 32 characters of the activation code have been correctly entered, the
device will boot with the rights assigned by the administra tor, in the same way
as if a corresponding SmartCard were inserted.
The activation code c an only be used once to start the d evice; it immediately becomes
invalid when the device boots. If you wish to switch off the device and start it again
without your SmartCard, the procedure described above must be repeated each time.
Fujitsu 81
85


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujitsu LIFEBOOK T902 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujitsu LIFEBOOK T902 in the language / languages: English as an attachment in your email.

The manual is 2,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fujitsu LIFEBOOK T902

Fujitsu LIFEBOOK T902 User Manual - German - 136 pages

Fujitsu LIFEBOOK T902 User Manual - Dutch - 136 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info