617186
60
Zoom out
Zoom in
Previous page
1/100
Next page
Security functions
Activating system protection
Start the BIOS Se tup Utility and go to the Security menu.
Operatingsystem
Select the Password on Boot option and press the Enter key.
Select the desired option (Disabled, First Boot or Every Boot) and press the Enter key
Select the Save Changes & E xit option unde r Exit.
The notebook will reboot. You will be prompted to enter your password (the supervisor password).
Deactivating system protection
Start the BIOS Se tup Utility and go to the Security menu.
Operatingsystem
Select the Password on Boot option and press the Enter key.
Select the Disabled option and press the Ent er key.
If you do not want to change any other settings, you can exit BIOS Setup Utility.
Select the Save Changes & E xit option unde r Exit.
The notebook will reboo t. The system is no longer password-prote cted .
Password protection for the hard disk
Passwordprotec
tion:
The had disk password prevents unauthorised access to the hard disk drives
and is checked internally each time the system is booted. The condition for this
is that you have assigned at least the supervisor password.
Activating hard disk protection
Call up the BIO
SSetupand select the Security menu.
If you have not assigned BIO S passwords yet, dene the s upervisor and the user
password now, if desired (see "
Securit y functions", Page 53).
Mark the Har
d D isk Security eld and press the Enter key.
In the Drive0 area mark the Set Master Password eld and press the Enter key.
Enter new P
assword then ap pears and you are asked to enter a password.
Enter the password and press the Enter key.
Conrm ne
w Password requires you to con rm the password.
Enter the password again and press the Enter k ey.
Setup Not
ice: Changes have b ee n saved is displayed to conrm that the
new pass
word has been saved.
To assign the password for the second hard disk (Drive1), go to the Drive1 area and
select the eld Set Master Password, then proceed in exactly the same way as for
setting up the password for the rst hard disk (Drive0).
The e
ld Password Entry on Boot is set to Enabled by default. You can exit the BIOS
Setup
once you have nished changing the settings.
From the Exit menu, choose the option Exit Saving Changes.
Pres
s the Enter key and select Yes.
The notebook reb oots and your hard disk is now protected with a password. The system
will ask you to enter the password when the noteb ook is restarted again.
56 Fujitsu Technology Solutions
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujitsu LIFEBOOK S751 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujitsu LIFEBOOK S751 in the language / languages: English as an attachment in your email.

The manual is 1,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fujitsu LIFEBOOK S751

Fujitsu LIFEBOOK S751 User Manual - German - 106 pages

Fujitsu LIFEBOOK S751 User Manual - Dutch - 106 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info