617267

Fujitsu LIFEBOOK AH562 Manual

47
Zoom out
Zoom in
Previous page
1/83
Next page
Security functions
Configuring password protection in BIOS Setup Utility
Before using the various options for password protection in the BIOS Setup utility
to increase data security, please observe the following:
Make a note of the passwords and keep them in a safe place. If you forget your
supervisor password you will not be able to access your notebook. Passwords are
not covered by your warranty and a charge will be made for assistance.
Password protection
Your password can be up to
eight characters long and contain letters and numbers.
No distinction i s made be
tween uppercase and lowercase.
Protecting BIOS Setup Utility (supervisor and user password)
If you have opened these o perating instructions on the screen, we
recommend that you print them out. You cannot call the instructions onto
the screen while you are setting up the password.
BIOSSetupUtility
The supervisor password and the user password both prevent unauthorised use of the
BIOS-Set up-Utility. With the aid of the supervisor password you can access all of the functions of
the BIOS-Setup-Utility, while the u ser password will only give you access to some of the functions.
You c an only set up a user password if a supervisor password has already been assigned.
Please refer to section "Settings in BIO S Setup Utility", Page 59 for a description
of how to call up and operate the BIOS-Setup-Utili ty.
Setting supervisor and user password
► Start the BIOS Setup Utility and go to the Security menu.
► Select the Set Supervisor Passw o rd field and press the Enter key.
With Enter new Password: you are asked to enter a password.
► Enter the password an d p ress the Enter key.
Confirm new Password requires you to confirm the password.
► Enter the password aga in and press the Enter key.
Changes have been saved is a confirmation that the new password has been saved.
► To set the user password, select Set U ser Password and proceed exactly as
when configuring the supervisor password.
If you do not want to change any other settings, you can exit BIOS Setup Utility.
► In the Exit menu, select the option Save Changes & Exit.
► Select Yes and press the Enter key.
PasswordSuperv isorpasswordUserpassword
The notebook will be rebooted and th e new password will come into effect. It will now be
necessary to first enter your supervisor or user password in order to open the BIOS Setup Utility.
Please note that the user password only provides access to a few of the BIOS settings.
Fujitsu 43
… 47 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujitsu LIFEBOOK AH562 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujitsu LIFEBOOK AH562 in the language / languages: English as an attachment in your email.

The manual is 1,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info