617519
17
Zoom out
Zoom in
Previous page
1/65
Next page
Important notes
Safety notes for the system
This device com plies with the relevant safety regulations fo r data processing equipment,
including electronic o fce machines for u se in an ofce environment. If you have
any questions about whether the device can b e used in the intended environment,
please conta ct your sales ofce or our Service Desk.
The display surface of the device is s ensitive to pressure and scratches. You should therefore
be careful with the display surface in order to avoid lasting damage (scratches).
If the device is brought into the installation site from a cold environment, condensation
can form. Before operating the device, wait until it is absolutely dry and has re ached
approximately the same temperature as the installation site.
When installing and op erating the device, please observe the notes on ambient
conditions in "
Technical data", Page 58 and the instructions in "Settin g up
an ergonomic video workstation", Page 20.
To ensure s ufcient ventilation, the air inlet and outlet openings of the device must be kept clear.
The device automatically sets itself to the correct voltage within th e range from 100 V to 240 V.
Make sure that the local mains voltage is neither higher nor lower than this range.
Ensure that the power socket on the device and the m ains outlet are freely acce ssible.
The ON/OFF switch does not disconnect the monitor from the mains voltage. To disconnect
fully from the mains supply, disconnect the power plug from the socket.
The device is equipped with a power cable that complies with safety standards.
Use the supplied power cable only.
Lay the cab les in s uch a way that they do not create a hazard (danger of tripping)
and cannot be damaged. When connecting the device, observe the relevant n otes
in chapter "
Connecting external devices", Page 25.
No data transfer cables should be connected or disconne cted during a thunderstorm.
Make sure that no objects (e.g. jewe llery chains, paper clips, etc.) or liquids get
inside the device (danger of electric shock, short circuit).
The device is not waterproof! Never immerse the device in water and protect
it from spray water (rain, sea water).
In an emergency (e.g. damaged casing, operation controls or cables, penetration
of liquids or foreign matter), switch off the device, disconnect the power plug
and contact your sale s outlet or our Service Desk.
Repairs to the device must only be performed by qua li e d technicians. Unauthorised opening
and incorrect repair may greatly end anger the user (electric shock, re risk).
Only use the screen resolution settings and refresh rates specied in Chapter
"
Technical data", Page 58. Othe rwise you may damage the device. If you are in
any doubt, con tact your sales outlet or our Help Desk.
Use a screen saver with m oving images and activate the power management for
your monitor t o prevent still images from "burning in".
We recommend that you place your device on a durable, non-slip surface. In view
of the many different nishes and varnishes used on furniture, it is possible that the
feet of the device m ay mark the s urface they stand on.
Fujitsu 13
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujitsu FUTRO X913-T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujitsu FUTRO X913-T in the language / languages: English as an attachment in your email.

The manual is 0,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fujitsu FUTRO X913-T

Fujitsu FUTRO X913-T User Manual - German - 66 pages

Fujitsu FUTRO X913-T User Manual - Dutch - 65 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info