617415
15
Zoom out
Zoom in
Previous page
1/69
Next page
Important notes
Important notes on preparing your FUTRO S720/S920
or ESPRIMO A525-L for use via t
he Power
over Ethernet module
With th e aid of the P ower over
Ethernet module, you can operate the F UTR O S720/S920
ortheESPRIMOA525-Lovert
he LAN without any ad ditional power connection.
You will need a suitable n
etwork infrastructure for this.
To opera te the FUTRO S720
/S920 or the ESPRIMO A525-L v ia the Power over Ethernet module,
midspan devices con for
ming to IEEE 802.3at and shielded CAT 5 network cable or higher quality
cable are required. End
span devices will only be supported in conjunction with a hardware
classication. Fujit
su recommends the use of the following midspan devices:
1 port midspan from Mic
rosemi PD-9501G: S26361-F1744-L10
12 port midspan from Microsemi PD-9512G: S26 361-F 1744-L20
Because of the limit
ed power output, not all hardware conguration levels are possible for
operating the FUTR
O S720/S920 or the E SPRIMO A525-L via t he Power ove r Ethernet
module. The follow
ing hardware congurations are possible:
Internal memory ex
pansion
accordingtoCongurator
mSATA mod ule (FUTRO) / HDD (ESPRIMO) according to Congurator
SmartCard reade
r
internal SmartC
ard reader
Speaker
internal speake
r
WLAN
internal W LAN module according to Congurator
PCI/PCIe car
ds or extra interfaces
none
Depending on the system utilisation, occupancy of external interfaces (excluding the keyboard,
screen, microphone and headset) may cause overloading of the Power over Ethernet module.
In order to s upport the largest possible occupancy of interfaces, if an overload occurs the
performance of the system is lowered by a reduction in the CPU frequency. If the CPU frequency
is permanently reduced, the occupancy of the exte rnal interfaces must be checked and reduced
accordingly to prevent damage to the Power over Ethernet module or the midspan. Alternatively,
the system c an also be connected via a suitable AC adapter (see note in this Operating
Manual). The system must be switched off before the AC adapter is connected.
If you are perhaps retrotting a FUTR O/ESPRIMO with a Power over Ethernet module,
please pay attention to the ma ximum possible expansion. If PCI/PCIe expansion cards are
installed (FUTRO S920), these must be removed, othe rwise the Power over Ethernet module
or the midspan may be overloaded and switched off aut omatically.
Important notes on preparing your FUTRO S920
for use with an external graphics card
The FUT RO S920 may in addition be tted with a graphics ca rd. Only specially approved
graphics cards are allowed to b e used. If a graphics card is retrotted in the FUTRO S920, it is
important to note that a 65W AC adapter is needed for operation. T he FUTRO S920 without a
graphics card is only supplied from the factory w ith a 40W AC adapter as standard.
Fujitsu 11
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujitsu FUTRO S920 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujitsu FUTRO S920 in the language / languages: English as an attachment in your email.

The manual is 2,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fujitsu FUTRO S920

Fujitsu FUTRO S920 User Manual - German - 69 pages

Fujitsu FUTRO S920 User Manual - Dutch - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info