213058
125
Zoom out
Zoom in
Previous page
1/137
Next page
CONTENTS
INTRODUCTION
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATIONS
3 SCANNING VARIOUS TYPES OF
DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 DOCUMENT SPECIFICATIONS FOR ADF
7.1 Document Size
7.2 Document Quality
7.3 Maximum Document Loading Capacity
7.4 Area not to be perforated
7.5 Multi feed Detection Conditions
8 OPTIONS
9 SCANNER SPECIFICATIONS
Appendix
7.5 Multi feed Detection Conditions
1
2
There are three multi feed detection modes: document thickness, document length, and both document
thickness and length. The following conditions must be satisfied in each of these detection modes.
Detection by Document Thickness
Sheets of the same thickness shall be set in the ADF at a time.
Document thickness: 0.065 to 0.15mm
Printed area: 12% or less
No black printed areas are allowed at the center area (26 x 10mm) at the leading edge of the
document.
Punched holes are not allowed within 35mm of the vertical center line of the document.
The deviation in the amount of the light transmitted through background areas must not be less
than 10%.
Detection by Document Length
Sheets of the same length shall be set in the ADF at a time.
Document length deviation: 1% or less
Punched holes are not allowed within 35mm of the vertical center line of the document.
Detection by Document Thickness and Length
Sheets of the same thickness and length shall be set in the ADF at a time.
Document thickness: 0.065 to 0.15mm
Document length deviation: 1% or less
Printed area: 12% or less
No black printed areas are allowed at the center area (26 x 10mm) at the leading edge of the
document.
Punched holes are not allowed within 35mm of the vertical center line of the document.
The deviation in the amount of the light transmitted through background areas must not be less
than 10%.
1
2
CONTENTS
125


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujitsu fi 5110c at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujitsu fi 5110c in the language / languages: English as an attachment in your email.

The manual is 4,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info