617474
65
Zoom out
Zoom in
Previous page
1/70
Next page
System expansio ns
Installing the heat sink
Open the casing (see "Opening the casing", Page 38).
Install the heat sink again in the same way as it was tted in the
device at the time of removal.
Insert the heat sink into the casing. To do this, correctly align the screw holes on
the heat sink with the screw holes on the mainboard.
Tighten the screws.
Connect the fan cables to the mainboard.
Close the casing (see "
Closing the casing" , Page 39).
Mainboard expansio
ns
Details on how to upgrade the m ain memory or the processor of your device
can be found in the manual for the mainboard.
UpgradesLithium bat teryProcessorMainmemoryMai nboa rd
Upgrading main memory
Open the casing (see "Opening the casing", Page 38).
Mainmemory
Upgrade the main memory according to the description in the manual for the mainboard.
Close the casing (see "
Closing the casing" , Page 39).
Replacing the processor
Open the casin
g(see"
Opening the casing", Pag e 38).
Remove the heat sink (see "
Removing the heat sink", Page 60).
Replace the
processor as described in the manual for the mainboard.
Install the heat sink again (see "
Install ing the heat sin k", Page 61).
Close the c
asing (see "
Closing the casing" , Page 39).
Replacing the lithium battery
In order to permanently save the system information, a lithium battery is installed to provide
the CMOS-memory with a current. A corresponding error message noties the user when the
charge is too low or the ba ttery is empty. The lithium battery must then be replaced.
For 0-Watt devices: As a n interim solution, the device can be started using the
emergency on bu tton at the rear, see ch apter "
Switch ing on a devic e when the
lithium battery is discharged (0-Watt devices)", Page 23.
Fujitsu 61
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujitsu ESPRIMO P900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujitsu ESPRIMO P900 in the language / languages: English as an attachment in your email.

The manual is 2,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fujitsu ESPRIMO P900

Fujitsu ESPRIMO P900 User Manual - Dutch - 75 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info