617446
43
Zoom out
Zoom in
Previous page
1/92
Next page
Troubleshooting and tips
Fujitsu Technology Solutions 35
No mouse pointer displayed on the screen
Shut down the operating system properly.
Switch off the device.
Check that the mouse cable is properly connected to the system unit.
If you use an adapter or extension lead with the mouse cable, check the connections.
Make sure that only one mouse is connected.
Switch the device on.
The floppy disk cannot be read or written
Check that the write protection of the floppy disk or the floppy disk drive is activated (refer to
the "BIOS Setup" manual and if necessary to the manual for the mainboard).
Check the relevant entries for floppy disk drive in the Main menu of the BIOS Setup.
Check that the floppy disk drive controller is enabled (refer also to the manual for the
mainboard or in the "BIOS Setup" manual).
Check that the cables of the floppy disk drive are properly connected (see "
Replacing the
floppy disk drive").
Time and/or date is not correct
You can set the time and date in the BIOS Setup or in the operating system.
Set the time and date.
i
If the time and date are repeatedly wrong when you switch on your PC, the on-board
battery is flat. Change the lithium battery as described in the "
Extensions to the
mainboard"-"
Replacing lithium battery".
Error messages on the screen
Error messages and their explanation are contained:
in the manual for the mainboard
in the "BIOS Setup" manual
in the documentation for the programmes used
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujitsu ESPRIMO E9900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujitsu ESPRIMO E9900 in the language / languages: English as an attachment in your email.

The manual is 1,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fujitsu ESPRIMO E9900

Fujitsu ESPRIMO E9900 User Manual - German - 90 pages

Fujitsu ESPRIMO E9900 User Manual - Dutch - 90 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info