20103
10
Zoom out
Zoom in
Previous page
1/18
Next page
No. Item Selectable option (style function)
15 OFFSET: -N (N: 1 TO 8) – Backward shift of n/60 inch 0* - Standard
+m (m: 1 to 7) – Forward shift of m/60 inch
16 PPR OUT: Stop printing when out-of-paper* is detected, or ignore out-or-
paper detection and keep on printing.
17 DC3-CDE: Enable* or Disable DC3/DC1 codes. Print data received
between a DC3 and DC1 code is ignored when enabled.
18 CR-CODE: Select Line Feed (not only LF code (OA hexadecimal) but also
the all of the other paper feed commands) without a Carriage
Return or Carriage Return with each Line Feed*.
20 AUTO CR: Select causing a Carriage Return when the print
21 PRT DIR: Select Bi-directional* Uni-directional printing
22 BUZZER Enable* or disable the buzzer when an error occurs.
*Indicates factory default setting.
INTERFACE FUNCTION SELECTIONS
When the Display shows “FUNCTN :INTRFCE” and the ITEM button is pressed,
the printer enters the function “INTRFCE” and the display shows the current
selection.
To move from item to item in this function, press the ITEM/(LF) button. The
display will show the next item and the current selection.
Example: When “TYPE :SERIAL” shows in the display, it means that under the
item “TYPE”, the current selection (interface type) is “SERIAL”.
To change the current selection, press the SELECT/(RESET) button until the
selectable option you want to select is displayed, then press the ITEM/(LF) button,
your selection is set until power to the printer is turned off (unless the selection
has been saved, see paragraph 3.9). The next item is shown on the display.
The following chart provides an explanation of the items and selectable options in
the INTRFCE Function:
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujitsu DL2600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujitsu DL2600 in the language / languages: English as an attachment in your email.

The manual is 0,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fujitsu DL2600

Fujitsu DL2600 User Manual - English - 126 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info