Manual Fujitsu CELSIUS H700 (page 100 of 108) (Dutch)

560265

100

Zoom out

Zoom in

1/108

Instructies van de fabrikant

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the eq uipm ent into an outlet th at is on a different circuit than t he receiver.

• Consult the dealer or an experienced radio/TV technician for help.

Notice to Users of the US Telephone Network

Your n otebook may be supplied with an internal modem which complies with Part 68 of the

FCC rules. On this notebook is a label that contains the FCC Registration Number and the

Ringer Equivalence Number (REN) for this equipment among oth er information. If requested,

the user must provide their telephone company with the following information:

1. The telephone number to which the notebook is connected.

2. The Ringer Equivalence Number (REN) for this equipment.

3. The equipment requires a standard modular jack type USOC RJ-11C

which is FCC Part 68 compliant.

4. The FCC Registration Number.

This equipment is designed to be connected to the telephone network or pre m ises wiring using

a standard modular jack type USO C RJ-11C which is FCC Part 68 compliant and a line cord

between the modem and the telephone network with a minimum of 26AWG.

The REN is used to determine the number of devices that you m a y connect to your telephone

line and still have all of those devices ring when your number is called. To o many devices

on one line may result in failure to ring in response to an incoming call. In most, but not all,

areas the sum of the RENs of all of the devices should not exceed ﬁve (5). To be certain

of the number of devices you may connect to your line, as determined by the RENs, c ontact

your local telephone company. If this equipment causes ha rm to the telephone network, your

telephone compa ny may d iscontinue your service tem porarily. If possible, they will notify you

in advance. If advance n otice is not practical they will notify you as soon as possible. You

will also be advised of your right to ﬁle a complaint with the FCC.

This fax modem also complies with fax branding requirements per FCC Part 68.

Your telephone company will probably ask you to disconnect this eq uipm ent from the telephone

network until the problem is corrected and you are sure that the equipm ent is not malfunctioning.

This equipment may not be used on coin-operated telephones provided by your te lephone

company. Connection to party lines is subject to state tariffs. Contact your state’s public utility

commission, public service commission or co rporation commission for more information.

This equipment includes automatic dialing capability. When programming and/or

making test calls to emerg ency numbers:

• Remain on the line and brieﬂy explain to the dispatcher the reason for the call.

• Perform such activities in off-peak hours, such as early morning or late evening.

FCC rules prohibit the use of non-hearing aid compatible telephones in the

following locations or applications:

• All public or semipublic coin-operated or credit card telephones.

• Elevators, highways, tunnels (automobile, subway, railroad or ped estrian) where a

person with impaired hearing might be isolated in an emergency.

• Places where telephones are speciﬁcally installed to alert emergency authorities

such as ﬁre, police or medical assistance personnel.

• Hospital rooms, residential health care facilities, convalescent homes and prisons.

• Hotel, motel or apartment lobbies.

96 Fujitsu Technology Solutions

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fujitsu CELSIUS H700 in the language / languages: Dutch as an attachment in your email.

The manual is 1,21 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fujitsu CELSIUS H700

Fujitsu CELSIUS H700 User Manual - English - 106 pages

Fujitsu CELSIUS H700 User Manual - German - 109 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fujitsu CELSIUS H700 Manual

Product: