617602
11
Zoom out
Zoom in
Previous page
1/43
Next page
Important notes
Important notes
ImportantnotesNotes
In this chapter you will nd information reg arding safety which it is essential to
take note of when working with your device.
Safety instructions
This device complies wit
h the relevant safety regulations for data processing equipment,
including electronic of
ce machines for use in an ofce environ m ent. If you have
any questions about whe
ther the device can be used in the intended environment,
please contact your sal
es ofce or our Service Desk.
The display surface of
the device is sensitive to pressure and scratches. You should therefore
be careful with the dis
play surface in order to avoid lasting damage (scratches).
If the device is brought into the installation site from a cold environment, condensation
can form . Before op erating the device, wait until it is absolutely dry and has reached
approximately the same temperature as the installation site.
When installing an
d operating the device, please observe the notes on environmental
conditions in Chap
ter "
Technical specica tion", Page 35 as well as the instructions in
Chapter "
Setting
up an ergonomic video workstation", Page 12.
To ensure sufcient ventilation, the air inlet and outlet openings of the device m u st be kept clear.
The device autom
atically sets itself to the correct voltage within the range from 100 V to 240 V.
Make sure that t
he local mains voltage is neither higher nor lower than this range.
Ensure that the power socket on the device and the mains outlet are freely accessible.
The ON/OFF but
ton does not disconn ect the monitor from the AC voltage. To completely
disconnect fr
om the AC voltage, you must remove the pow er plug from the power socket.
The device is equipped with a power cable that complies with safety standards.
Use the suppl
ied power cable only.
Lay the cab les in such a way that they do not create a hazard (danger of tripping)
and cannot be damaged. When connecting the device, observe the relevant
notes in chapter "
Connecting the device", Page 16.
No data tra
nsfer c ables should b e connected or disconnected during a thunderstorm.
Make sure that no objects (e.g. jewellery chains, paper clips, etc.) or liquids get
inside the d evice (danger of electric shock, short circuit).
The devic
e is not waterproof! Never immerse the device in water and protect
it from s
pray water (rain, sea water).
In an emergency (e.g. damaged casing, operation controls or cables, penetration
of liquids or foreign matter), switch off the device, disconnect the power plug
and contact your sales outlet or our Service Desk.
Repai
rs to the device m ust only be perfo rmed by qualied technicians. Unauthorised opening
and in
correct repair may greatly endanger the user (electric shock, re risk).
Only use the screen resolution settings and refresh rates specied in Chapter "
Technical
specication", Page 35. Otherwise you m ay damage the device. If you are in any
doubt, contact your sales outlet or our Service Desk.
•Usea
screen saver with moving images and activate the power management for
you
r monitor to prevent still images from "burning in".
Fujitsu 7
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujitsu B23T-7 LED at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujitsu B23T-7 LED in the language / languages: English as an attachment in your email.

The manual is 1,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fujitsu B23T-7 LED

Fujitsu B23T-7 LED User Manual - German - 43 pages

Fujitsu B23T-7 LED User Manual - Dutch - 43 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info