617526
12
Zoom out
Zoom in
Previous page
1/41
Next page
Important notes
The device must only be operated in landsc ape mode (0°) an d portrait m ode (90°). The
control buttons are located in the middle of the bottom of the monitor in landscap e mode
(0°) and at the left-hand side of the monitor in portrait mode (90°).
Store this manual close to the device. If you pass the device on to third
parties, you should pass this manual on with it.
We recommend that you place your device on a durable, non-slip surface. In view
of the many different nishes and varnishes used on furniture, it is possible that the
feet of the device may mark the surface they stand on.
Power cable
Use the supplied power cable only.
Use the following guidelines if it is necessary to replace the original cable set.
The female/male receptacles of the c ord set must meet IEC60320/CEE-22 requirements.
The cable has to be HAR-certied or VDE-certied. The mark HAR or
VDE will appear on the outer sheath.
For devices w hich are mounted on a desk or table, type SVT or SJT cable sets may be
used. For devices which sit o n the oor, only SJT type cable sets may be used.
The cable set must be selected according to the rated current for yo ur device.
If ne cessary, replace the original power cable with a regular grounded 3-core mains lead.
Transporting the device
Device,Transpo rtatio nRetransportation
Transport all parts separately in the ir original packaging or in a packaging which
protects them from knocks and jolts, to the new site.
Do not unpack them until all transportation mano euvres are completed.
If the device is brought from a cold environment into the room where it will be used,
condensation may occur. Before ope rating the device, wait until it is absolutely dry
and has reached approximately the same temperature as the installation site.
Cleaning the device
Switch of
f the device an d unplug the power plug.
Do not cl
ean any interior parts yourself, leave this job to a service technician.
Do not us
e any cleaning agents that contain abrasives o r may corrode plastic.
Ensure
that no liquid enters the device.
The display surface of the device is sensitive to pressure and scratches. Clean
it only using a s oft, slightly moiste ned cloth.
The surface of the casing can be cleaned with a dry cloth. If particularly dirty, use a cloth that
has been moistened in m ild domestic detergent and then carefully wrung out.
8 Fujitsu Tech nology Solutions
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujitsu B19-6 LED at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujitsu B19-6 LED in the language / languages: English as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fujitsu B19-6 LED

Fujitsu B19-6 LED User Manual - German - 42 pages

Fujitsu B19-6 LED User Manual - Dutch - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info