587438
11
Zoom out
Zoom in
Previous page
1/18
Next page
Ge-11
AUTOMATISCHE LUFTLEITLAMELLEN-FÜHRUNG
Schalten Sie das Klimagerät ein, bevor Sie den folgenden Bedienungsschritt ausführen.
COIL DRY-BETRIEB
Durch Drücken der COIL DRY-Taste auf der Fernbedienung kann das Innengerät getrocknet werden, um Schimmelbildung
und das Entwickeln von Bakterien zu verhindern.
Nach Drücken der COIL DRY-Taste läuft der COIL DRY-Betrieb 20 Minuten lang und schaltet sich automatisch aus.
Den COIL DRY-Betrieb wählen
Während des Betriebs oder wenn der Betrieb ausgeschaltet
wird, die Taste COIL DRY (Spule trocknen) (Fig. 6 N) drücken.
DieCOIL DRY-Anzeige (Fig.7 d) leuchtet. Nach 20 Minuten erlischt sie dann.
Den COIL DRY-Betrieb abbrechen
Während des COIL DRY (Spule trocknen)-Betriebs die START
/ STOP-Taste (Fig. 6 S) drücken.
Die COIL DRY-Anzeige(Fig.7 d) erlischt. Dann schaltet sich der Betrieb aus.
Die COIL DRY-Taste während des COIL DRY-Betriebs erneut drücken; der COIL
DRY-Betrieb kann zurückgesetzt werden (reset).
Der COIL DRY-Betrieb kann vorhandenen Schimmel oder vorhandene Bakterien
nicht beseitigen und er hat auch keine Sterilisations-Wirkung.
Über den COIL DRY-Betrieb.
Wahl des SWING-Betriebs
Drücken Sie die SWING-Taste (Fig. 6 V).
Die SWING-Anzeige (Fig. 7 f) leuchtet auf.
Mit jedem Drücken der SWING-Taste ändert sich der SWING-Betrieb folgender-
maßen.
Beenden des SWING-Betriebs
Drücken Sie die SWING-Taste und wählen Sie STOP.
Die Luftstromrichtung kehrt in die Ausgangsstellung zurück.
Vertikale Wedelbewegung horizontale Wedelbewegung
vertikale/horizontale WedelbewegungWedelbewegung stoppt
Hinweise zum SWING-Betrieb
Vertikale Wedelbewegung: Der SWING-Betrieb startet
in folgendem Bereich je nach aktueller Luftstrom-
richtung.
Luftstromrichtung 14 (zum Kühlen, Entfeuchten).
Wenn sich das obere Luftstromrichtungsgitter in
der horizontalen Stellung befindet, bewegt sich
das untere Luftstromrichtungsgitter (wedelt), um
den Luftstrom weit zu verteilen.
Luftstromrichtung 36 (zum Heizen).
Wenn die Luftstromrichtungsgitter geneigt oder
ganz nach unten gerichtet sind, wird der Luftstrom
hauptsächlich auf den Boden geführt.
Horizontale Wedelbewegung: Die Luftstromrichtungs-
gitter bewegen sich (wedeln) nach links/rechts.
Vertikale/horizontale Wedelbewegung: Die Luftstrom-
richtungsgitter bewegen sich (wedeln) auf/ab und nach
links/rechts.
Der SWING-Betrieb wird ggf. kurzzeitig unterbrochen,
wenn der Lüfter des Klimageräts nicht oder nur mit
sehr niedriger Drehzahl läuft.
Wenn die SETTaste (EINSTELLEN) (Vertikal) während
des Auf-/Ab-Swingbetriebs gedrückt wird, schaltet sich
der Auf-/Ab-Swingbetrieb aus. Und wenn die SET-Taste
(EINSTELLEN) (Horizontal) während des Links-/Rechts-
Swingbetriebs gedrückt wird, schaltet sich der Links-/
Rechts-Swingbetrieb aus.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujitsu ASYB 24 LDC Plasma at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujitsu ASYB 24 LDC Plasma in the language / languages: German as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info