48552

Fujitsu 176V Manual

21
Zoom out
Zoom in
Previous page
1/27
Next page
Color monitor 176V
A26361-K711-Z100-1-5E19 English - 13
Setting the picture geometry
Trapezoid distortion is when the top or bottom of the screen display is too wide or too narrow.
Parallelogram distortion means that the sides of the picture bend to the left or right. Tilt distortion
must be set when the screen display is not axially symmetrical. Unsymmetrical pin balance is when
the sides of the screen displays are bent inward or outward on one side. Vertical linearity must be
set when the screen display appears distorted at the top or bottom.
Calling the Geometry setting window
Trapezoid distortion (Trapezoid): Making the bottom edge narrower and the top edge
wider or making the top edge narrower and the bottom edge wider.
Parallelogram distortion (Parallelogram): Reducing the angle of the left and right
sides.
Picture rotation (Rotation): Rotating the picture in a clockwise or counter-clockwise
direction.
Non-symmetrical pincushion distortion (Pinbalance): Setting the sides so that they are
symmetrical.
Vertical linearity (V-Linearity): Correcting compression distortion at the top or bottom
of the display.
Setting language for the OSD menu
Setting language for the OSD menu (Language)
Setting advanced options
If the picture you see on screen has light and dark stripes or appears dull and blurred, this may be
due to what is known as the moiré effect. This effect usually has physical causes, being triggered by
interference between the pixels in the matrix and the video signal. The intensity of the moiré effect is
dependent on the screen resolution and horizontal frequency.
i
Set the picture size, brightness, etc. before you switch on moiré reduction.
Only switch moiré reduction on if you can see light and dark stripes on your screen, or if the
picture is dull and blurred.
In some cases, moiré reduction may cause the picture quality to deteriorate (reduced
picture definition, slight flickering.)
Calling the Advanced setting window
Setting or disabling the vertical moiré reduction (H-Moiré)
The moiré reduction intensity is set with the - and + keys (0 = disabled).
Setting or disabling the horizontal moiré reduction (V-Moiré)
The moiré reduction intensity is set with the - and + keys (0 = disabled).
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujitsu 176V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujitsu 176V in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 0,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info