540492
128
Zoom out
Zoom in
Previous page
1/148
Next page
DIGITAL CAMERA
X-A1
Owner’s Manual
Thank you for your purchase of this product. This
manual describes how to use your FUJIFILM X-A1
digital camera and install the supplied software. Be
sure that you have read and understood its contents
before using the camera.
For information on related products, visit our website at
http://www.fujifilm.com/products/digital_cameras/index.html
Before You Begin
First Steps
Basic Photography
and Playback
Basic Movie Recording
and Playback
The Q (Quick Menu) Button
More on Photography
and Playback
Menus
Connections
Technical Notes
Troubleshooting
EN
BL03901-100
Appendix
ii
For Your Safety
For Your Safety
Read Instructions: All the safety and operating instructions
should be read before the appliance is operated.
Retain Instructions: The safety and operating instructions
should be retained for future reference.
Heed Warnings: All warnings on the appliance and in the
operating instructions should be adhered to.
Follow Instructions: All operating and use instructions
should be followed.
Installation
Installation
Power Sources: This video product should be operated only
from the type of power source indicated on the marking la-
bel. If you are not sure of the type of power supply to your
home, consult your appliance dealer or local power com-
pany. For video products intended to operate from battery
power, or other sources, refer to the operating instructions.
Grounding or Polarization: This video product is equipped
with a polarized alternating-current line plug (a plug having
one blade wider than the other). This plug will fi t into the
power outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet, try revers-
ing the plug. If the plug should still fail to fi t, contact your
electrician to replace your obsolete outlet. Do not defeat
the safety purpose of the polarized plug.
Alternate Warnings: This video product is equipped with
a three-wire grounding-type plug, a plug having a third
(grounding) pin. This plug will only fi t into a grounding-
type power outlet. This is a safety feature. If you are unable
to insert the plug into the outlet, contact your electrician to
replace your obsolete outlet. Do not defeat the safety pur-
pose of the grounding type plug.
Overloading: Do not overload wall outlets and extension
cords as this can result in a risk of fi re or electric shock.
Ventilation: Slots and openings in the cabinet are provided
for ventilation, to ensure reliable operation of the video
product and to protect it from overheating, and these open-
ings must not be blocked or covered. The openings should
never be blocked by placing the video product on a bed,
sofa, rug, or other similar surface.
This video product should not be placed in a built-in instal-
lation such as a bookcase or rack unless proper ventilation
is provided or the manufacturer’s instructions have been
adhered to. This video product should never be placed near
or over a radiator or heat register.
Attachments: Do not use attachments not recommended by
the video product manufacturer as they may cause hazards.
Water and Moisture: Do not use this video product near wa-
ter—for example, near a bath tub, wash bowl, kitchen sink,
or laundry tub, in a wet basement, or near a swimming pool,
and the like.
Power-Cord Protection: Power-supply cords should be routed
so that they are not likely to be walked on or pinched by
items placed upon or against them, paying particular at-
tention to cords at plugs, convenience receptacles, and the
point where they exit from the appliance.
Accessories: Do not place this video product on an unstable
cart, stand, tripod, bracket, or table. The video product may
fall, causing serious injury to a child or adult, and serious
damage to the appliance. Use only with a cart, stand, tri-
pod, bracket, or table recommended by the manufacturer, or
sold with the video product. Any mounting of the appliance
should follow the manufacturer’s instructions, and should use
a mounting accessory recommended by the manufacturer.
An appliance and cart combination
should be moved with care. Quick
stops, excessive force, and uneven
surfaces may cause the appliance
and cart combination to overturn.
Antennas
Antennas
Outdoor Antenna Grounding: If an outside antenna or cable
system is connected to the video product, be sure the anten-
na or cable system is grounded so as to provide some protec-
tion against voltage surges and built-up static charges. Sec-
tion 810 of the National Electrical Code, ANSI/NFPA No. 70,
provides information with respect to proper grounding of the
mast and supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding conductors,
location of antenna discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode.
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL ELECTRICAL CODE
Antenna Lead
in Wire
Ground Clamp
Grounding Conductors
(NEC SECTION 810-21)
Power Service Grounding Electrode
System (NEC ART 250. PART H)
Antenna
Discharge Unit
(NEC SECTION
810-20)
Electric Service
Equipment
Ground Clamps
Power Lines: An outside antenna system should not be lo-
cated in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power
lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such
power lines or circuits as contact with them might be fatal.
Use
Use
Cleaning: Unplug this video product from the wall outlet be-
fore cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning.
Object and Liquid Entry: Never push objects of any kind into this
video product through openings as they may touch dangerous
voltage points or short out parts that could result in a fi re or elec-
tric shock. Never spill liquid of any kind on the video product.
Lightning: For added protection for this video product re-
ceiver during a lightning storm, or when it is left unattended
and unused for long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable system. This will
prevent damage to the video product due to lightning and
power-line surges.
IMPORTANT SAFETY INSTRUCTIONS
iii
For Your Safety
Service
Service
Servicing: Do not attempt to service this video product
yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to
qualifi ed service personnel.
Damage Requiring Service: Unplug this video product from
the wall outlet and refer servicing to qualifi ed service per-
sonnel under the following conditions:
When the power-supply cord or plug is damaged
• If liquid has been spilled, or objects have fallen into the
video product.
If the video product has been exposed to rain or water.
If the video product has been dropped or the cabinet has
been damaged.
If the video product does not operate normally follow the
operating instructions. Adjust only those controls that are
covered by the operating instructions as an improper adjust-
ment of other controls may result in damage and will often
require extensive work by a qualifi ed technician to restore
the video product to its normal operation.
When the video product exhibits a distinct change in perfor-
mance this indicates a need for service.
Replacement Parts: When replacement parts are required,
be sure the service technician has used replacement parts
specifi ed by the manufacturer or have the same character-
istics as the original part. Unauthorized substitutions may
result in fi re, electric shock or other hazards.
Safety Check: Upon completion of any service or repairs to
this video product, ask the service technician to perform
safety checks to determine that the video product is in
proper operating condition.
Be sure to read these notes before use
Safety Notes
• Make sure that you use your camera correctly. Read these
safety notes and your Owners Manual carefully before use.
• After reading these safety notes, store them in a safe place.
About the Icons
The icons shown below are used in this document to indi-
cate the severity of the injury or damage that can result if the
information indicated by the icon is ignored and the product
is used incorrectly as a result.
WARNING
This icon indicates that death or seri-
ous injury can result if the information
is ignored.
CAUTION
This icon indicates that personal injury
or material damage can result if the in-
formation is ignored.
The icons shown below are used to indicate the nature of the
instructions which are to be observed.
Triangular icons tell you that this information re-
quires attention (“Important”).
Circular icons with a diagonal bar tell you that the
action indicated is prohibited (“Prohibited”).
Filled circles with an exclamation mark indicate an
action that must be performed (“Required”).
WARNING
WARNING
Unplug
from power
socket
If a problem arises, turn the camera o , remove the
battery, and disconnect and unplug the AC power
adapter. Continued use of the camera when it
is emitting smoke, is emitting any unusual odor,
or is in any other abnormal state can cause a fi re
or electric shock. Contact your FUJIFILM dealer.
Do not allow water or foreign objects to enter the
camera. If water or foreign objects get inside the
camera, turn the camera off , remove the battery,
and disconnect and unplug the AC power adapt-
er. Continued use of the camera can cause a fi re
or electric shock. Contact your FUJIFILM dealer.
WARNING
WARNING
Do not use in
the bathroom
or shower
Do not use the camera in the bathroom or shower.
This can cause a fi re or electric shock.
Do not disas-
semble
Never attempt to change or take apart the camera
(never open the case). Failure to observe this pre-
caution can cause fi re or electric shock.
Do not touch
internal parts
Should the case break open as the result of a fall or
other accident, do not touch the exposed parts. Fail-
ure to observe this precaution could result in elec-
tric shock or in injury from touching the damaged
parts. Remove the battery immediately, taking
care to avoid injury or electric shock, and take the
product to the point of purchase for consultation.
Do not change, heat or unduly twist or pull the con-
nection cord and do not place heavy objects on the
connection cord. These actions could damage the
cord and cause a fi re or electric shock. If the cord
is damaged, contact your FUJIFILM dealer.
Do not place the camera on an unstable surface. This
can cause the camera to fall or tip over and cause
injury.
Never attempt to take pictures while in motion. Do
not use the camera while walking or driving. This
can result in you falling down or being involved in
a traffi c accident.
Do not touch any metal parts of the camera during
a thunderstorm. This can cause an electric shock
due to induced current from the lightning dis-
charge.
Do not use the battery except as speci ed. Load the
battery as shown by the indicator.
Do not heat, change or take apart the battery. Do not
drop or subject the battery to impacts. Do not store
the battery with metallic products. Any of these ac-
tions can cause the battery to burst or leak and
cause fi re or injury as a result.
iv
For Your Safety
WARNING
WARNING
Use only batteries or AC power adapters speci ed for
use with this camera. Do not use voltages other than
the power supply voltage shown. The use of other
power sources can cause a fi re.
If the battery leaks and  uid gets in contact with your
eyes, skin or clothing,  ush the a ected area with
clean water and seek medical attention or call an
emergency number right away.
Do not use the charger to charge batteries other than
those speci ed here. The supplied charger is for
use only with batteries of the type supplied with
the camera. Using the charger to charge conven-
tional batteries or other types of rechargeable
batteries can cause the battery to leak, overheat
or burst.
Do not use in the presence of  ammable objects, ex-
plosive gases, or dust.
When carrying the battery, install it in a digital cam-
era or keep it in the hard case. When storing the bat-
tery, keep it in the hard case. When discarding, cover
the battery terminals with insulation tape. Contact
with other metallic objects or batteries could
cause the battery to ignite or burst.
Keep memory cards out of the reach of small children.
Because memory cards are small, they can be
swallowed by children. Be sure to store memory
cards out of the reach of small children. If a child
swallows a memory card, seek medical attention
or call an emergency number.
CAUTION
CAUTION
Do not use this camera in locations a ected by oil
fumes, steam, humidity or dust. This can cause a
re or electric shock.
Do not leave this camera in places subject to extremely
high temperatures. Do not leave the camera in
locations such as a sealed vehicle or in direct sun-
light. This can cause a fi re.
CAUTION
CAUTION
Keep out of the reach of small children. This product
could cause injury in the hands of a child.
Do not place heavy objects on the camera. This can
cause the heavy object to tip over or fall and
cause injury.
Do not move the camera while the AC power adapter
is still connected. Do not pull on the connection cord
to disconnect the AC power adapter. This can dam-
age the power cord or cables and cause a fi re or
electric shock.
Do not cover or wrap the camera or the AC power
adapter in a cloth or blanket. This can cause heat
to build up and distort the casing or cause a fi re.
When you are cleaning the camera or you do not plan
to use the camera for an extended period, remove
the battery and disconnect and unplug the AC power
adapter. Failure to do so can cause a fi re or elec-
tric shock.
When charging ends, unplug the charger from the
power socket. Leaving the charger plugged into
the power socket can cause a fi re.
Using a  ash too close to a person’s eyes may tempo-
rarily a ect the eyesight. Take particular care when
photographing infants and young children.
When a memory card is removed, the card could come
out of the slot too quickly. Use your  nger to hold it
and gently release the card. Injury could result to
those struck by the ejected card.
Request regular internal testing and cleaning for
your camera. Build-up of dust in your camera
can cause a fi re or electric shock. Contact your
FUJIFILM dealer to request internal cleaning every
two years. Please note that this service is not free
of charge.
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
The Battery and Power Supply
Note: Check the type of battery used in your camera and
read the appropriate sections.
The following describes the proper use of batteries and how
to prolong their life. Incorrect use can shorten battery life or
cause leakage, overheating, fi re, or explosion.
Li-ion Batteries
Li-ion Batteries
Read this section if your camera uses a rechargeable
Li-ion battery.
The battery is not charged at shipment. Charge the battery
before use. Keep the battery in its case when not in use.
Notes on the Battery
The battery gradually loses its charge when not in use.
Charge the battery one or two days before use.
Battery life can be extended by turning the camera off when
not in use.
Battery capacity decreases at low temperatures; a depleted
battery may not function at when cold. Keep a fully charged
spare battery in a warm place and exchange as necessary,
or keep the battery in your pocket or other warm place and
insert it in the camera only when shooting. Do not place
the battery in direct contact with hand warmers or other
heating devices.
Charging the Battery
Charge the battery in the supplied battery charger. Charg-
ing times will increase at ambient temperatures below
+10 °C (+50 °F) or above +35 °C (+95 °F). Do not attempt
to charge the battery at temperatures above 40 °C (+104 °F);
at temperatures below 0 °C (+32 °F), the battery will not
charge.
Do not attempt to recharge a fully charged battery. The bat-
tery does not however need to be fully discharged before
charging.
The battery may be warm to the touch immediately after
charging or use. This is normal.
v
For Your Safety
Battery Life
At normal temperatures, the battery can be recharged about
300 times. A noticeable decrease in the length of time the
battery will hold a charge indicates that it has reached the
end of its service life and should be replaced.
Storage
Performance may be impaired if the battery is left unused
for extended periods when fully charged. Run the battery
at before storing it.
If the camera will not be used for an extended period, re-
move the battery and store it in a dry place with an ambient
temperature of from +15 °C to +25 °C (+59 °F to +77 °F). Do
not store in locations exposed to extremes of temperature.
Cautions: Handling the Battery
Do not transport or store with metal objects such as neck-
laces or hairpins.
Do not expose to fl ame or heat.
Do not disassemble or modify.
Use with designated chargers only.
Dispose of used batteries promptly.
Do not drop or subject to strong physical shocks.
Do not expose to water.
Keep the terminals clean.
The battery and camera body may become warm to the
touch after extended use. This is normal.
AA Alkaline/Rechargeable Ni-MH Batteries
AA Alkaline/Rechargeable Ni-MH Batteries
Read this section if your camera uses AA alkaline or re-
chargeable AA Ni-MH batteries. Information on compat-
ible battery types may be found elsewhere in the camera
manual.
Cautions: Handling the Batteries
Do not expose to water, fl ame, or heat, or store in warm or
humid conditions.
Do not transport or store with metal objects such as neck-
laces or hairpins.
Do not disassemble or modify the batteries or battery
casing.
Do not subject to strong physical shocks.
Do not use batteries that are leaking, deformed, or discol-
ored.
Keep out of reach of infants and small children.
Insert in the correct orientation.
Do not mix old and new batteries, batteries with diff erent
charge levels, or batteries of diff erent types.
If the camera will not be used for an extended period, re-
move the batteries. Note that the camera clock will be reset.
• The batteries may be warm to the touch immediately after
use. Turn the camera off and allow the batteries to cool
before handling.
• Battery capacity tends to decrease at low temperatures.
Keep spare batteries in a pocket or other warm place and
exchange as necessary. Cold batteries may recover some
of their charge when warmed.
Fingerprints and other stains on the battery terminals
can impair battery performance. Thoroughly clean the
terminals with a soft, dry cloth before inserting them in
the camera.
If the batteries leak, clean the battery compartment
thoroughly before inserting new batteries.
If fl uid from the battery comes into contact with skin
or clothing, fl ush the aff ected area with water. If
uid enters your eyes, immediately  ush the a ected
area with water and seek medical attention. Do not rub
your eyes. Failure to observe this precaution could result
in permanent visual impairment.
Ni-MH Batteries
The capacity of Ni-MH batteries may be temporarily reduced
when new, after long periods of disuse, or if they are repeat-
edly recharged before being fully discharged. This is normal
and does not indicate a malfunction. Capacity can be in-
creased by repeatedly discharging the batteries using the
discharge option in the camera setup menu and recharging
them using a battery charger.
Q CAUTION: Do not use the discharge option with alkaline
batteries.
The camera draws a small amount of current even when off .
Ni-MH batteries that have been left in the camera for an ex-
tended period may be drawn down to the point that they no
longer hold a charge. Battery performance may also drop if
the batteries are run down in a device such as a fl ashlight. Use
the discharge option in the camera setup menu to discharge
Ni-MH batteries. Batteries that no longer hold a charge
even after repeatedly being discharged and recharged have
reached the end of their service life and must be replaced.
Ni-MH batteries can be recharged in a battery charger (sold
separately). Batteries may become warm to the touch after
charging. Refer to the instructions provided with the charger
for more information. Use the charger with compatible bat-
teries only.
Ni-MH batteries gradually lose their charge when not in use.
Disposal
Dispose of used batteries in accord with local regulations.
AC Power Adapters (Available Separately)
AC Power Adapters (Available Separately)
This section applies to all camera models. Use only
FUJIFILM AC power adapters designated for use with this
camera. Other adapters could damage the camera.
The AC power adapter is for indoor use only.
Be sure the DC plug is securely connected to the camera.
Turn the camera off before disconnecting the adapter.
Disconnect the adapter by the plug, not the cable.
Do not use with other devices.
Do not disassemble.
Do not expose to high heat and humidity.
Do not subject to strong physical shocks.
The adapter may hum or become hot to the touch during
use. This is normal.
• If the adapter causes radio interference, reorient or relocate
the receiving antenna.
vi
For Your Safety
Using the Camera
Do not aim the camera at extremely bright light sources,
such as the sun in a cloudless sky. Failure to observe this
precaution could damage the camera image sensor.
• Strong sunlight focused through the viewfi nder may dam-
age the panel of electronic viewfi nder (EVF). Do not aim
the electronic viewfi nder at the sun.
Take Test Shots
Take Test Shots
Before taking photographs on important occasions (such as
at weddings or before taking the camera on a trip), take a
test shot and view the results to ensure that the camera is
functioning normally. FUJIFILM Corporation can not accept
liability for damages or lost profi ts incurred as a result of
product malfunction.
Notes on Copyright
Notes on Copyright
Unless intended solely for personal use, images recorded us-
ing your digital camera system cannot be used in ways that
infringe copyright laws without the consent of the owner.
Note that some restrictions apply to the photographing of
stage performances, entertainments, and exhibits, even
when intended purely for personal use. Users are also asked
to note that the transfer of memory cards containing images
or data protected under copyright laws is only permissible
within the restrictions imposed by those copyright laws.
Handling
Handling
To ensure that images are recorded correctly, do not subject
the camera to impact or physical shocks while images are
being recorded.
Liquid Crystal
Liquid Crystal
In the event that the display is damaged, care should be
taken to avoid contact with liquid crystal. Take the urgent
action indicated should any of the following situations arise:
If liquid crystal comes in contact with your skin, clean the
area with a cloth and then wash thoroughly with soap and
running water.
If liquid crystal enters your eyes, fl ush the aff ected eye with
clean water for at least 15 minutes and then seek medical
assistance.
If liquid crystal is swallowed, rinse your mouth thoroughly
with water. Drink large quantities of water and induce
vomiting, then seek medical assistance.
Although the display is manufactured using extremely high-
precision technology, it may contain pixels that are always lit
or that do not light. This is not a malfunction, and images
recorded with the product are unaff ected.
Trademark Information
Trademark Information
xD-Picture Card and E are trademarks of FUJIFILM
Corporation. The typefaces included herein are solely devel-
oped by DynaComware Taiwan Inc. Macintosh, QuickTime,
and Mac OS are trademarks of Apple Inc. in the U.S.A. and
other countries. Windows 8, Windows 7, Windows Vista, and
the Windows logo are trademarks of the Microsoft group of
companies. Wi-Fi® and Wi-Fi Protected Setup® are registered
trademarks of the Wi-Fi Alliance. Adobe and Adobe Reader
are either trademarks or registered trademarks of Adobe
Systems Incorporated in the U.S.A. and/or other countries.
The SDHC and SDXC logos are trademarks of SD-3C, LLC.
The HDMI logo is a trademark. YouTube is a trademark of
Google Inc. All other trade names mentioned in this manual
are the trademarks or registered trademarks of their respec-
tive owners.
Electrical Interference
Electrical Interference
This camera may interfere with hospital or aviation equip-
ment. Consult with hospital or airline staff before using the
camera in a hospital or on an aircraft.
Color Television Systems
Color Television Systems
NTSC (National Television System Committee) is a color tele-
vision telecasting specifi cation adopted mainly in the U.S.A.,
Canada, and Japan. PAL (Phase Alternation by Line) is a color
television system adopted mainly in European countries and
China.
Electrical Interference
Electrical Interference
Exif Print is a newly revised digital camera fi le format in
which information stored with photographs is used for opti-
mal color reproduction during printing.
IMPORTANT NOTICE: Read Before Using the Software
Direct or indirect export, in whole or in part, of licensed soft-
ware without the permission of the applicable governing
bodies is prohibited.
NOTICES
To prevent  re or shock hazard, do not expose the unit
to rain or moisture.
Please read the “Safety Notes” and make sure you un-
derstand them before using the camera.
Perchlorate Material—special handling may apply. See
http://www.dtsc.ca.gov/hazardouswaste/perchlorate.
vii
For Your Safety
For Customers in the U. S. A.
For Customers in the U. S. A.
Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE
Contains IC : 7736B-02000002
Contains FCC ID : W2Z-02000002
FCC Statement: This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2)this device must accept any interference received, includ-
ing interference that may cause undesired operation.
CAUTION: This equipment has been tested and found to com-
ply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to pro-
vide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular in-
stallation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the fol-
lowing measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit diff erent
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician
for help.
FCC Caution: Any changes or modifi cations not expressly ap-
proved by the party responsible for compliance could void
the user’s authority to operate this equipment.
This transmitter must not be co-located or operating in con-
junction with any other antenna or transmitter.
Radiation Exposure Statement: This device meets the gov-
ernment’s requirements for exposure to radio waves. This
device is designed and manufactured not to exceed the
emission limits for exposure to radio frequency (RF) energy
set by the Federal Communications Commission of the U.S.
Government.
The exposure standard for wireless device employs a unit
of measurement known as the Specifi c Absorption Rate, or
SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR
are conducted using standard operating positions accepted
by the FCC with the device transmitting at its highest certi-
ed power level in all tested frequency bands.
Notes on the Grant: To comply with Part 15 of the FCC Rules,
this product must be used with a Fujifi lm-specifi ed ferrite-
core A/V cable, USB cable, and DC supply cord.
A lithium ion battery that is recyclable
powers the product you have purchased.
Please call 1-800-8-BATTERY for informa-
tion on how to recycle this battery.
For Customers in Canada
For Customers in Canada
CAUTION: This Class B digital apparatus complies with Cana-
dian ICES-003.
Industry Canada statement: This device complies with RSS-
210 of the Industry Canada Rules. Operation is subject to
the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
This device and its antenna(s) must not be co-located or op-
erating in conjunction with any other antenna or transmit-
ter, except tested built-in radios. The County Code Selection
feature is disabled for products marketed in the US/ Canada.
Radiation Exposure Statement: The product comply with the
Canada portable RF exposure limit set forth for an uncon-
trolled environment and are safe for intended operation as
described in this manual. The further RF exposure reduction
can be achieved if the product can be kept as far as possible
from the user body or set the device to lower output power
if such function is available.
Disposal of Electrical and Electronic Equipment in Private Households
Disposal of Electrical and Electronic Equipment in Private Households
In the European Union, Norway, Iceland and
Liechtenstein: This symbol on the product, or in
the manual and in the warranty, and/or on its
packaging indicates that this product shall not
be treated as household waste. Instead it should
be taken to an applicable collection point for the
recycling of electrical and electronic equipment.
By ensuring this product is disposed of correctly, you will
help prevent potential negative consequences to the en-
vironment and human health, which could otherwise be
caused by inappropriate waste handling of this product.
This symbol on the batteries or accumulators in-
dicates that those batteries shall not be treated
as household waste.
If your equipment contains easy removable batteries or
accumulators please dispose these separately according to
your local requirements.
The recycling of materials will help to conserve natural re-
sources. For more detailed information about recycling this
product, please contact your local city offi ce, your household
waste disposal service or the shop where you purchased the
product.
In Countries Outside the European Union, Norway, Iceland and
Liechtenstein: If you wish to discard this product, including
the batteries or accumulators, please contact your local au-
thorities and ask for the correct way of disposal.
In Japan: This symbol on the batteries indicates
that they are to be disposed of separately.
viii
For Your Safety
Be sure to read these notes before use
Safety Notes
Thank you for your purchase of this product. For repair, inspection, and internal testing, con-
tact your FUJIFILM dealer.
• Make sure that you use the lens correctly. Read these safety notes and the camera Owners
Manual carefully before use.
After reading these safety notes, store them in a safe place.
About the Icons
The icons shown below are used in this document to indicate the severity of the injury or
damage that can result if the information indicated by the icon is ignored and the product
is used incorrectly as a result.
WARNING
This icon indicates that death or serious injury can result if the informa-
tion is ignored.
CAUTION
This icon indicates that personal injury or material damage can result if
the information is ignored.
The icons shown below are used to indicate the nature of the instructions which are to be
observed.
Triangular icons tell you that this information requires attention (“Important”).
Circular icons with a diagonal bar tell you that the action indicated is prohibited
(“Prohibited”).
Filled circles with an exclamation mark indicate an action that must be performed
(“Required”).
WARNING
WARNING
Do not use in
the bathroom or
shower
Do not immerse in or expose to water. Failure to observe this precaution can cause
a fi re or electric shock.
Do not disas-
semble
Do not disassemble (do not open the case). Failure to observe this precaution can
cause fi re, electric shock, or injury due to product malfunction.
Do not touch
internal parts
Should the case break open as the result of a fall or other accident, do not touch the
exposed parts. Failure to observe this precaution could result in electric shock
or in injury from touching the damaged parts. Remove the camera battery
immediately, taking care to avoid injury or electric shock, and take the product
to the point of purchase for consultation.
WARNING
WARNING
Do not place on unstable surfaces. The product may fall, causing injury.
Do not view the sun through the lens or camera view nders. Failure to observe this
precaution can cause permanent visual impairment.
CAUTION
CAUTION
Do not use or store in locations that are exposed to steam, or smoke or are very humid
or extremely dusty. Failure to observe this precaution can cause fi re or electric
shock.
Do not leave in direct sunlight or in locations subject to very high temperatures, such
as in a closed vehicle on a sunny day. Failure to observe this precaution can cause
fi r e .
Keep out of the reach of small children. This product could cause injury in the
hands of a child.
Do not handle with wet hands. Failure to observe this precaution can cause
electric shock.
Keep the sun out of the frame when shooting backlit subjects. Sunlight focused into
the camera when the sun is in or close to the frame can cause fi re or burns.
When the product is not in use, replace the lens caps and store out of direct sunlight.
Sunlight focused by the lens can cause fi re or burns.
Do not carry the camera or lens while they are attached to a tripod. The product can
fall or strike other objects, causing injury.
ix
For Your Safety
European Union regulatory notice
European Union regulatory notice
This product complies with the following EU Directives:
Low Voltage Directive 2006/95/EC
EMC Directive 2004/108/EC
R & TTE Directive 1999/5/EC
Compliance with these directives implies conformity to applicable harmonized European
standards (European Norms) which are listed on the EU Declaration of Conformity issued by
FUJIFILM Corporation for this product or product family.
This compliance is indicated by the following conformity marking placed on the product:
This marking is valid for non-Telecom products and EU harmonized Telecom products (e.g.
Bluetooth).
Regarding the Declaration of Conformity, visit http://www.fujifilm.com/products/digital_
cameras/x/fujifilm_x_a1/pdf/index/fujifilm_x_a1_cod.pdf.
IMPORTANT: Read the following notices before using the camera’s built-in wireless
transmitter.
Q This product, which contains encryption function developed in the United States, is con-
trolled by the United States Export Administration Regulations and may not be exported
or re-exported to any country to which the United States embargoes goods.
Use only as part of a wireless network. FUJIFILM does not accept liability for damages result-
ing from unauthorized use. Do not use in applications requiring a high degree of reliability,
for example in medical devices or other systems that may directly or indirectly impact
human life. When using the device in computer and other systems that demand a greater
degree of reliability than wireless networks, be sure to take all necessary precautions to
ensure safety and prevent malfunction.
Use only in the country in which the device was purchased. This device conforms to regulations
governing wireless network devices in the country in which it was purchased. Observe all
location regulations when using the device. FUJIFILM does not accept liability for prob-
lems arising from use in other jurisdictions.
Wireless data (images) may be intercepted by third parties. The security of data transmitted
over wireless networks is not guaranteed.
Do not use the device in locations subject to magnetic  elds, static electricity, or radio interference.
Do not use the transmitter in the vicinity of microwave ovens or in other locations subject
to magnetic fi elds, static electricity, or radio interference that may prevent reception of
wireless signals. Mutual interference may occur when the transmitter is used in the vicinity
of other wireless devices operating in the 2.4GHz band.
The wireless transmitter operates in the 2.4GHz band using DSSS and OFDM modulation.
Wireless Network Devices: Cautions
This device operates on the same frequency as commercial, educational, and medical devices and
wireless transmitters. It also operates on the same frequency as licensed transmitters and
special unlicensed low-voltage transmitters used in RFID tracking systems for assembly
lines and in other similar applications.
To prevent interference with the above devices, observe the following precautions. Confi rm that
the RFID transmitter is not in operation before using this device. Should you observe that
the device causes interference in licensed transmitters used for RFID tracking, immediately
choose a new operating frequency for this device to prevent additional interference. If you
notice that this device causes interference in low-voltage RFID tracing systems, contact a
FUJIFILM representative.
2.4DS/OF4
This sticker indicates that this device operates in the 2.4GHz
band using DSSS and OFDM modulation and may cause inter-
ference at distances of up to 40m.
x
About This Manual
About This Manual
Before using the camera, read this manual and the warnings in “For Your Safety (P ii). For information
on speci c topics, consult the sources below.
Table of Contents
Table of Contents
.................................................
.................................................
P
P
xii
xii
Troubleshooting
Troubleshooting
................................................
................................................
P
P
112
112
The Table of Contents gives an overview of the
entire manual. The principal camera operations
are listed here.
Having a speci c problem with the camera?
Find the answer here.
Warning Messages and Displays
Warning Messages and Displays
.........................
.........................
P
P
118
118
Restrictions on Camera Settings
Restrictions on Camera Settings
..........................
..........................
P
P
128
128
Find out whats behind that  ashing icon or error
message in the display.
See page 128 for restrictions on the options
available in each shooting mode.
Memory Cards
Memory Cards
Pictures are stored on optional SD, SDHC, and SDXC memory cards (P 16), referred to in this manual as “memory
cards.
xi
Product Care
Product Care
Camera body: For continued enjoyment of your camera, use a soft, dry cloth to clean the camera body
after each use. Do not use alcohol, thinner, or other volatile chemicals, which could discolor or deform
the leather on the camera body. Any liquid on the camera should be removed immediately with a
soft, dry cloth. Use a blower to remove dust from the monitor, taking care to avoid scratches, and then
gently wipe with a soft, dry cloth. Any remaining stains can be removed by wiping gently with a piece
of FUJIFILM lens-cleaning paper to which a small amount of lens-cleaning  uid has been applied. To
prevent dust entering the camera, replace the body cap when no lens is in place.
Image sensor: Dust can be removed from the image sensor using the V SENSOR CLEANING option in
the setup menu (P 86).
Interchangeable lenses: Use a blower to remove dust, then gently wipe with a soft, dry cloth. Any remain-
ing stains can be removed by wiping gently with a piece of FUJIFILM lens-cleaning paper to which a
small amount of lens-cleaning  uid has been applied. Replace the front and rear caps when the lens
is not use.
xii
Table of Contents
Table of Contents
For Your Safety ..................................................................................... ii
IMPORTANT SAFETY INSTRUCTIONS .........................................ii
Safety Notes .......................................................................................iii
NOTICES ..............................................................................................vii
Safety Notes .....................................................................................viii
About This Manual .............................................................................x
Product Care ........................................................................................xi
Before You Begin
Before You Begin
Symbols and Conventions ..............................................................1
Supplied Accessories ........................................................................1
Parts of the Camera ...........................................................................2
The Main Command ........................................................................5
The Sub-Command Dial ................................................................. 5
Camera Displays ................................................................................6
Shooting ............................................................................................6
Playback .............................................................................................7
Lenses ......................................................................................................8
Parts of the Lens ................................................................................8
Removing the Caps ..........................................................................8
Attaching the Hood .........................................................................8
Lenses with Aperture Rings ..........................................................9
Lenses with O.I.S. Switches ............................................................9
Manual Focus Lenses ....................................................................... 9
First Steps
First Steps
Attaching the Strap ........................................................................ 10
Attaching a Lens .............................................................................. 11
Charging the Battery ..................................................................... 12
Inserting the Battery and a Memory Card ........................... 13
Compatible Memory Cards ..................................................... 16
Turning the Camera on and O ................................................ 17
Basic Setup ......................................................................................... 18
The DISP/BACK Button ....................................................................... 19
Shooting ......................................................................................... 19
Playback .......................................................................................... 20
Basic Photography and Playback
Basic Photography and Playback
Taking Photographs ....................................................................... 21
Viewing Pictures .............................................................................. 23
Viewing Pictures Full Frame ....................................................... 23
Playback Zoom ............................................................................... 24
Multi-Frame Playback ................................................................... 25
Deleting Pictures ............................................................................. 26
Using the Flash ................................................................................. 27
Macro Mode (Close-ups) .............................................................. 29
Basic Movie Recording and Playback
Basic Movie Recording and Playback
Recording High-De nition (HD) Movies ............................... 30
Viewing Movies ................................................................................ 31
The Q (Quick Menu) Button
The Q (Quick Menu) Button
xiii
Table of Contents
More on Photography and Playback
More on Photography and Playback
Shooting Mode ................................................................................. 33
S ADVANCED SR AUTO ............................................................. 34
B AUTO ............................................................................................ 34
Adv. ADVANCED ............................................................................ 35
Y ADVANCED FILTER ............................................................... 36
j MULTIPLE EXPOSURE ........................................................... 37
SP SCENE POSITION /N/M/h ................................................ 38
Program AE (P) ................................................................................ 40
Shutter-Priority AE (S) .................................................................. 41
Aperture-Priority AE (A) ............................................................... 42
Manual Exposure (M) .................................................................... 43
Custom Mode (C) ........................................................................... 44
White Balance ................................................................................... 45
Sensitivity ........................................................................................... 47
AUTO ................................................................................................ 48
Focus Mode ........................................................................................ 49
p MANUAL ................................................................................. 50
Focus Frame Selection ................................................................. 52
Focus/Exposure Lock ..................................................................... 53
Exposure Compensation .............................................................. 55
Metering .............................................................................................. 56
Using the Self-Timer ....................................................................... 57
Continuous Shooting (Burst Mode) ........................................ 59
Bracketing ........................................................................................... 60
Film Simulation ................................................................................ 61
Recording Pictures in RAW Format ......................................... 62
Creating JPEG Copies of RAW Pictures .................................. 63
The Fn Button .................................................................................... 64
Using a Mount Adapter ................................................................ 65
Mount Adapter Settings.............................................................. 65
Choosing a Focal Length ......................................................... 65
Distortion Correction ................................................................ 65
Color Shading Correction ........................................................ 66
Peripheral Illumination Correction ...................................... 66
Image Search ..................................................................................... 67
PhotoBook Assist ............................................................................. 68
Creating a PhotoBook .................................................................. 68
Viewing Photobooks .................................................................... 69
Editing and Deleting Photobooks ........................................... 69
xiv
Table of Contents
Menus
Menus
Using the Menus: Shooting Mode ........................................... 70
Shooting Menu Options (Photographs) ............................... 70
A SCENE POSITION ................................................................... 70
A Adv. MODE .............................................................................. 70
N ISO .............................................................................................. 70
O IMAGE SIZE .............................................................................. 70
T IMAGE QUALITY .................................................................... 71
U DYNAMIC RANGE.................................................................. 71
P FILM SIMULATION ................................................................ 71
X FILM SIMULATION BKT ....................................................... 71
B SELF-TIMER .............................................................................. 71
f COLOR ....................................................................................... 71
q SHARPNESS ............................................................................. 71
r HIGHLIGHT TONE .................................................................. 71
s SHADOW TONE ..................................................................... 72
h NOISE REDUCTION ............................................................... 72
K LONG EXPOSURE NR ........................................................... 72
K CUSTOM SET ........................................................................... 72
F FUNCTION (Fn) SETTING.................................................... 72
v DISP. CUSTOM SETTING ..................................................... 72
c FRAMING GUIDELINE .......................................................... 73
l MOUNT ADAPTOR SETTING ............................................. 73
m SHOOT WITHOUT LENS ...................................................... 73
L IS MODE ................................................................................... 73
C PHOTOMETRY ........................................................................ 74
b FACE DETECTION .................................................................. 74
F FOCUS MODE ......................................................................... 74
c MF ASSIST ................................................................................ 74
C AF ILLUMINATOR .................................................................. 75
v AE/AF-LOCK BUTTON.......................................................... 75
W MOVIE SET-UP........................................................................ 75
p FLASH MODE .......................................................................... 76
I FLASH COMPENSATION ..................................................... 76
B RED EYE REMOVAL ............................................................... 76
n SAVE ORG IMAGE ..................................................................
76
Using the Menus: Playback Mode............................................ 77
Playback Menu Options .............................................................. 77
A ERASE ........................................................................................ 77
G CROP .......................................................................................... 77
e RESIZE ....................................................................................... 78
D PROTECT .................................................................................. 78
C IMAGE ROTATE ....................................................................... 78
B RED EYE REMOVAL ............................................................... 79
I SLIDE SHOW ........................................................................... 79
m PHOTOBOOK ASSIST ........................................................... 80
j MARK FOR UPLOAD TO ...................................................... 80
b IMAGE SEARCH ...................................................................... 80
K PRINT ORDER (DPOF) .......................................................... 81
J DISP ASPECT ........................................................................... 81
r WIRELESS TRANSFER ........................................................... 81
s PC AUTO SAVE ....................................................................... 81
j RAW CONVERSION ............................................................... 81
xv
Table of Contents
The Setup Menu ...............................................................................
82
Using the Setup Menu ................................................................. 82
Setup Menu Options .................................................................... 83
F DATE/TIME ............................................................................... 83
N TIME DIFFERENCE ................................................................. 83
Q a ................................................................................ 83
R RESET ......................................................................................... 83
o SILENT MODE ......................................................................... 83
b SOUND SET-UP ...................................................................... 84
A SCREEN SET-UP ...................................................................... 84
I FOCUS RING ............................................................................ 85
Z POWER MANAGEMENT ...................................................... 85
B FRAME NO. .............................................................................. 85
U DATE STAMP ........................................................................... 86
V SENSOR CLEANING .............................................................. 86
M FOCUS SCALE UNITS ........................................................... 86
S CUSTOM RESET ..................................................................... 86
U GEOTAGGING SET-UP .......................................................... 87
r WIRELESS SET TINGS ............................................................ 87
s PC AUTO SAVE SETTING ..................................................... 87
K FORMAT .................................................................................... 87
Factory Defaults ............................................................................... 88
Connections
Connections
Uploading Pictures ......................................................................... 90
Location Data .................................................................................... 92
Downloading Location Data ..................................................... 92
Recording Location Data with Pictures ................................. 93
Viewing Location Data .............................................................. 93
Saving Pictures to a Computer .................................................. 94
Viewing Pictures on a Computer .............................................. 95
Windows: Installing MyFinePix Studio .................................. 95
Macintosh: Installing RAW FILE CONVERTER....................... 97
Macintosh: Importing Pictures ................................................. 97
Connecting the Camera .............................................................. 98
Printing Pictures via USB ...........................................................100
Connecting the Camera ............................................................ 100
Printing Selected Pictures ........................................................100
Printing the DPOF Print Order ................................................101
Creating a DPOF Print Order....................................................102
WITH DATE s/ WITHOUT DATE .......................................... 103
RESET ALL .....................................................................................104
Viewing Pictures on TV ...............................................................105
xvi
Table of Contents
Technical Notes
Technical Notes
Optional Accessories....................................................................106
Accessories from FUJIFILM .......................................................106
Connecting the Camera to Other Devices ......................... 109
Caring for the Camera ................................................................. 110
Storage and Use ...........................................................................110
Traveling .......................................................................................... 110
Cleaning the Image Sensor .......................................................111
Troubleshooting
Troubleshooting
Problems and Solutions .............................................................112
Warning Messages and Displays ............................................ 118
Appendix
Appendix
Memory Card Capacity ...............................................................121
The Command Dials .....................................................................122
Speci cations ..................................................................................123
Restrictions on Camera Settings ............................................ 128
1
Before You Begin
Before You Begin
Before You Begin
Symbols and Conventions
Symbols and Conventions
The following symbols are used in this manual:
Q This information should be read before use to ensure correct operation.
R Additional information that may be helpful when using the camera.
P Other pages in this manual on which related information may be found.
Menus and other text in the displays are shown in bold. In the illustrations in this manual, displays may
be simpli ed for explanatory purposes.
Supplied Accessories
Supplied Accessories
The following items are included with the camera:
NP-W126 rechargeable battery BC-W126 battery charger Body cap
Owners Manual (this manual)
• Shoulder strap
CD-ROM
R If you purchased a lens kit, check that a lens is included.
2
Parts of the Camera
Parts of the Camera
For more information, refer to the page listed to the right of each item.
A
A
Shutter button ................................................ 22
B
B
Main command ..........................................5, 122
C
C
Mode dial ........................................................ 33
D
D
Hot shoe ...................................................27, 109
E
E
Flash ............................................................... 27
F
F
Strap eyelet ..................................................... 10
G
G
Speaker ........................................................... 31
H
H
Lens signal contacts
I
I
Lens release button ......................................... 11
J
J
Microphone ..................................................... 30
K
K
AF-assist illuminator ....................................... 75
Self-timer lamp ............................................... 57
L
L
ON/OFF switch ............................................... 17
M
M
Fn (function) button ...................................... 64
Fn button options display button (press and hold)
*
Wi-Fi button (playback mode) ........................ 90
N
N
Battery chamber ............................................. 13
O
O
Memory card slot ............................................ 14
P
P
Battery latch ................................................... 13
Q
Q
LCD monitor (see below)
R
R
Sub-command dial ....................................5, 122
S
S
Connector cover ...............................98, 100, 105
T
T
Cable channel cover for DC coupler
U
U
Battery-chamber cover ................................... 13
V
V
Battery-chamber cover latch ........................... 13
W
W
Tripod mount
X
X
Micro USB/ ...............................................98, 100
remote release connector ...........................41, 43
Y
Y
HDMI mini connector .................................... 105
Z
Z
Body cap ......................................................... 11
* Press and hold to access F Fn BUTTON SETTING menu.
The LCD Monitor
The LCD Monitor
The LCD monitor can be tilted to make it view when framing pictures. When tilting the monitor, be careful that your  ngers
The LCD monitor can be tilted to make it view when framing pictures. When tilting the monitor, be careful that your  ngers
and other objects do not get caught between the monitor and the camera body. Do not touch the wires behind the display;
and other objects do not get caught between the monitor and the camera body. Do not touch the wires behind the display;
failure to observe this precaution could cause camera malfunction.
failure to observe this precaution could cause camera malfunction.
3
Before You Begin
Parts of the Camera
a
a
N ( ash pop-up) button ................................. 27
b
b
a (playback) button ..................................... 20
c
c
Indicator lamp (see below)
d
d
t(movie recording) button ........................... 30
e
e
MENU/OK button ............................................. 5
X (control lock) button (press and hold) ........ 4
f
f
Selector ............................................................. 5
g
g
Q (quick menu) button .................................... 32
Monitor sunlight mode button
(press and hold) ................................................ 4
RAW conversion button (playback mode) ....... 63
h
h
DISP (display)/BACK button ........................... 19
o (silent mode) button (press and hold) ....... 4
The Indicator Lamp
The Indicator Lamp
The indicator lamp shows camera status as follows:
Indicator lamp
Indicator lamp
Camera status
Camera status
Glows green
Glows green Focus locked.
Blinks green
Blinks green Blur, focus, or exposure warning. Picture can be taken.
Blinks green and orange
Blinks green and orange Recording pictures. Additional pictures can be taken.
Glows orange
Glows orange Recording pictures. No additional pictures can be taken at this time.
Blinks orange
Blinks orange Flash charging;  ash will not  re when picture is taken.
Blinks red
Blinks red Lens or memory error.
Indicator lamp
R Warnings may also appear in the display (P 118).
4
Parts of the Camera
Silent Mode
Silent Mode
In situations in which camera sounds or lights may
be unwelcome, press the DISP/BACK button until the
o icon is displayed (about a second). The camera
speaker,  ash, and AF-assist illuminator/self-timer
lamp turn o and  ash and volume settings can not
be adjusted (note that silent mode can not be en-
abled or disabled while movie playback is in prog-
ress). Press the DISP/BACK button again to resume
normal operation.
Control Lock
Control Lock
To avoid unintended operation of the selector and
the Q and t buttons during shooting, press MENU/OK
until X is displayed. The controls can be unlocked
by pressing MENU/OK until X is no longer displayed.
Bright Ambient Lighting
Bright Ambient Lighting
Re ections and glare caused by bright ambient light-
ing may make it hard to see the display in the moni-
tor, particularly when the camera is used outdoors.
This can be addressed by holding the Q button to
trigger outdoor mode. Outdoor mode can also be
enabled using the A SCREEN SET-UP> MONITOR
SUNLIGHT MODE option in the setup menu (P 84).
5
Before You Begin
Parts of the Camera
The Selector
The Selector
MENU/OK button
(P 70, 77, 82)
Move cursor left (g)
F (macro) button
(P 29)
Move cursor right (h)
WB (white balance)
button (P 45)
Move cursor up (e)
AF (autofocus) button (P 52)/
b (delete) button (P 26)
Move cursor down (f)
I (burst shooting) button (P 59, 60)
The Main Command
The Main Command
Rotate the main command dial to set
the exposure or shutter speed (P 43,
55), select options in the quick menu
display (P 32), or view other pictures
in playback mode (P 23).
The Sub-Command Dial
The Sub-Command Dial
Rotate the sub-command dial to
choose the desired combination of
shutter speed and aperture (program
shift; P 40), set aperture or shutter
speed (P 41, 42, 43), select options in the quick
menu display (P 32), or zoom in or out in full-
frame or thumbnail playback (P 24).
Press the center of the sub-com-
mand dial to zoom in on the focus
area selected for manual focus (P 51)
or zoom in on the focus point (P 24).
Press and hold the center of the sub-command
dial in manual focus mode to choose how focus
is displayed (P 50).
6
Parts of the Camera
Camera Displays
Camera Displays
The following types of indicator may be displayed during shooting and playback. In the description
that follows, all available indicators are shown for illustrative purposes; the indicators actually displayed
vary with camera settings.
Shooting
2
1
0
-1
-2
2
1
0
-1
-2
F
100
F5.6
M
±
0
1000 200
A
A
Flash mode ..................................................... 27
B
B
Macro (close-up) mode ................................... 29
C
C
Self-timer indicator ......................................... 57
D
D
Continuous mode ............................................ 59
E
E
Metering ......................................................... 56
F
F
White balance ................................................. 45
G
G
Film simulation ............................................... 61
H
H
Dynamic range ................................................ 71
I
I
Number of available frames .......................... 121
J
J
Image quality and size ...............................70, 71
K
K
Temperature warning.................................... 120
L
L
Blur warning ......................................3, 114, 118
M
M
IS mode ........................................................... 73
N
N
Location data download status ....................... 92
O
O
Date stamp...................................................... 86
P
P
Silent mode indicator ...................................4, 83
Q
Q
Distance indicator ........................................... 50
R
R
Battery level .................................................... 17
S
S
Sensitivity ....................................................... 47
T
T
Monitor sunlight mode ..................................... 4
U
U
Focus warning ....................................3, 114, 118
V
V
Exposure compensation .................................. 55
W
W
Aperture...............................................40, 42, 43
X
X
Shutter speed .......................................40, 41, 43
Y
Y
Shooting mode ............................................... 33
Z
Z
Manual focus indicator .................................... 50
a
a
Exposure compensation/
exposure indicator......................................43, 55
b
b
Histogram ....................................................... 20
c
c
Focus frame ................................................22, 53
7
Before You Begin
Parts of the Camera
Playback
100-0001
3:2
F
12 / 31 / 2050 10 :00
AM
YouTube
1 / 1000
1 / 1000
F5.6
F5.6
+
1
/
3
+
1
/
3
200200200
200
A
A
Rating ............................................................. 23
B
B
Intelligent Face Detection indicator................. 74
C
C
Red-eye removal indicator .............................. 79
D
D
Portrait enhancer ............................................ 39
E
E
Advanced  lter ................................................ 36
F
F
Gift image ....................................................... 23
G
G
Frame number ................................................ 85
H
H
Silent mode indicator ...................................4, 83
I
I
Dynamic range ................................................ 71
J
J
Playback mode indicator ................................. 23
K
K
Date and time ................................................. 18
L
L
Mark for upload to .......................................... 80
M
M
Photobook assist indicator .............................. 68
N
N
DPOF print indicator ...................................... 102
O
O
Protected image .............................................. 78
8
Lenses
Lenses
The camera can be used with lenses for the FUJIFILM X-mount and the other accessories listed from
page106.
Parts of the Lens
Parts of the Lens
A
A
Lens hood
B
B
Mounting marks
C
C
Focus ring
D
D
Zoom ring
E
E
Lens signal contacts
F
F
Front lens cap
G
G
Rear lens cap
Removing the Caps
Removing the Caps
Remove the caps as shown.
Attaching the Hood
Attaching the Hood
When attached, lens hoods reduce glare and pro-
tect the front lens element.
9
Before You Begin
Lenses
Lenses with Aperture Rings
Lenses with Aperture Rings
At settings other than A, you
can adjust aperture by rotating
the lens aperture ring (expo-
sure modes A and M).
Aperture ring
A161185.64
A161185.
The Aperture Mode Switch
The Aperture Mode Switch
If the lens has an aperture mode
switch, aperture can be adjusted
manually by sliding the switch
to Z and rotating the aperture
ring.
Aperture ring
Aperture mode switch
Q When the aperture ring is set to A, rotate the sub-
command dial to adjust aperture.
R For information on the roles of the main and sub-
command dials, see page 122.
Lenses with O.I.S. Switches
Lenses with O.I.S. Switches
To activate image stabilization,
slide the switch to ON.
O.I.S. switch
Manual Focus Lenses
Manual Focus Lenses
Slide the focus ring to the front for
autofocus.
For manual focus, slide the focus ring
to the back and rotate it while check-
ing the results in the camera display.
The focus distance and depth-of- eld
indicators can be used to assist manual
focus. Note that manual focus may not
be available in all shooting modes.
The Depth-of-Field Indicator
The Depth-of-Field Indicator
The depth-of- eld indicator shows the approximate
depth of  eld (the distance in front of and behind the
focus point that appears to be in focus).
Distance
indicator
Q The camera does not display the focus distance when
the lens is in manual focus mode.
10
First Steps
First Steps
Attaching the Strap
Attaching the Strap
Attach the strap to the two strap eyelets as shown below.
Q To avoid dropping the camera, be sure the strap is correctly secured.
11
First Steps
Attaching a Lens
Attaching a Lens
Lenses attach as described below.
Q Care is required to prevent dust entering the camera while attaching and removing lenses.
1
Remove the body and rear caps.
Remove the body cap from the camera and
the rear cap from the lens.
Q Do not touch the cameras internal parts.
2
Attach the lens.
Place the lens on mount, keeping the marks
on the lens and camera aligned, and then ro-
tate the lens until it clicks into place.
Q Do not press the lens release button while at-
taching the lens.
Removing Lenses
Removing Lenses
To remove the lens, turn the
camera o , then press the lens
release button and rotate the
lens as shown.
Lens release button
Q To prevent dust accumulating on the lens or inside the
camera, replace the lens caps and camera body cap
when the lens is not attached.
Lenses and Other Optional Accessories
Lenses and Other Optional Accessories
The camera can be used with lenses for the FUJIFILM
X-mount and the other accessories listed from page
106.
12
Charging the Battery
Charging the Battery
The battery is not charged at shipment. Before use, charge the battery in the supplied battery charger.
1
Place the battery in the charger.
Place the battery in the supplied battery char-
ger as shown.
Battery charger
Battery
Charge lamp
Arrow
The camera uses an NP-W126 rechargeable bat-
tery.
R The supplied AC cord is for use exclusively with
the supplied battery charger. Do not use the
supplied charger with other cords or the sup-
plied cord with other devices.
2
Plug the charger in.
Plug the charger into an indoor power outlet.
The charging indicator will light.
The Charging Indicator
The Charging Indicator
The charging indicator shows battery charge sta-
tus as follows:
Charging
Charging
indicator
indicator
Battery status
Battery status
Action
Action
O
O
Battery not
Battery not
inserted.
inserted.
Insert the battery.
Insert the battery.
Battery fully
Battery fully
charged.
charged.
Remove the battery.
Remove the battery.
On
On
Battery charging.
Battery charging.
Blinks
Blinks
Battery fault.
Battery fault.
Unplug the charger
Unplug the charger
and remove the
and remove the
battery.
battery.
3
Charge the battery.
Remove the battery when charging is
complete. See the speci cations (P 126) for
charging times (note that charging times in-
crease at low temperatures).
Q Unplug the charger when it is not in use.
13
First Steps
Inserting the Battery and a Memory Card
Inserting the Battery and a Memory Card
The camera has no internal memory; instead, pictures are stored on optional SD, SDHC, and SDXC
memory cards (sold separately). After charging the battery, insert the battery and memory card as
described below.
1
Open the battery-chamber cover.
Slide the battery-chamber latch as shown and
open the battery-chamber cover.
Q Do not open the battery-chamber cover when
the camera is on. Failure to observe this precau-
tion could damage image  les or memory cards.
Q Do not use excessive force when handling the
battery-chamber cover.
2
Insert the battery.
Using the battery to keep the battery latch
pressed to one side, insert the battery con-
tacts  rst in the direction shown by the arrow.
Con rm that the battery is securely latched.
Battery latch
Arrow
Q Insert the battery in the correct orientation. Do
not use force or attempt to insert the battery up-
side down or backwards. The battery will slide in
easily in the correct orientation.
14
Inserting the Battery and a Memory Card
3
Insert the memory card.
Holding the memory
card in the orientation
shown at right, slide
it in until it clicks into
place at the back of
the slot.
Click
Q Be sure card is in the correct orientation; do not
insert at an angle or use force.
Q SD/SDHC/SDXC memo-
ry cards can be locked,
making it impossible to
format the card or to
record or delete images.
Before inserting a memory card, slide the write-
protect switch to the unlocked position.
4
Close the battery-chamber cover.
Write-protect switch
15
First Steps
Inserting the Battery and a Memory Card
Removing the Battery and Memory Card
Removing the Battery and Memory Card
Before removing the battery or memory card, turn
the camera o and open the battery-chamber cover.
To remove the battery, press
the battery latch to the side,
and slide the battery out of
the camera as shown.
Battery latch
To remove the memory card,
press it in and release it slowly.
The card can then be removed
by hand. When a memory card
is removed, the card could be ejected too quickly. Use
your  nger to hold it and gently release the card.
Q
Q
Batteries
Batteries
Remove dirt from the battery terminals with a clean,
dry cloth. Failure to observe this precaution could
prevent the battery from charging.
Do not a x stickers or other objects to the battery.
Failure to observe this precaution could make it im-
possible to remove the battery from the camera.
Do not short the battery terminals. The battery could
overheat.
Read the cautions in The Battery and Power Supply
(
P iv).
Use only battery chargers designated for use with the
battery. Failure to observe this precaution could re-
sult in product malfunction.
Do not remove the labels from the battery or attempt
to split or peel the outer casing.
The battery gradually loses its charge when not in
use. Charge the battery one or two days before use.
16
Inserting the Battery and a Memory Card
Compatible Memory Cards
FUJIFILM and SanDisk SD, SDHC, and SDXC memory cards have been approved for use in the cam-
era. A complete list of approved memory cards is available at http://www.fujifilm.com/support/digital_
cameras/compatibility/. Operation is not guaranteed with other cards. The camera can not be used
with xD-Picture Cards or MultiMediaCard (MMC) devices.
Q
Q
Memory Cards
Memory Cards
Do not turn the camera o or remove the memory card while the memory card is being formatted or data are
being recorded to or deleted from the card. Failure to observe this precaution could damage the card.
Format memory cards before  rst use, and be sure to reformat all memory cards after using them in a computer
or other device. For more information on formatting memory cards, see page 87.
Memory cards are small and can be swallowed; keep out of reach of children. If a child swallows a memory card,
seek medical assistance immediately.
miniSD or microSD adapters that are larger or smaller than the standard dimensions of an SD/SDHC/SDXC card
may not eject normally; if the card does not eject, take the camera to an authorized service representative. Do
not forcibly remove the card.
Do not a x labels to memory cards. Peeling labels can cause camera malfunction.
Movie recording may be interrupted with some types of SD/SDHC/SDXC memory card. Use a H card or
better when shooting HD movies.
Formatting a memory card in the camera creates a folder in which pictures are stored. Do not rename or delete
this folder or use a computer or other device to edit, delete, or rename image  les. Always use the camera to
delete pictures; before editing or renaming  les, copy them to a computer and edit or rename the copies, not
the originals. Renaming the  les on the camera can cause problems during playback.
17
First Steps
Turning the Camera on and O
Turning the Camera on and O
Rotate the ON/OFF switch to ON to turn the camera on. Select OFF to turn
the camera o .
R Press the a button to start playback. Press the shutter button halfway to
return to shooting mode.
R The camera will turn o automatically if no operations are performed for the
length of time selected for Z POWER MANAGEMENT > AUTO POWER OFF (P 85). To reactivate the camera
after it has turned o automatically, press the shutter button halfway or turn the ON/OFF switch to OFF and then
back to ON.
R For information on startup options, see page 85.
Q Fingerprints and other marks on the lens can a ect pictures and the view through the lens in the camera
display. Keep the lens clean.
Battery Level
Battery Level
After turning the camera on, check the battery level in the display.
Indicator
Indicator
Description
Description
D (white)
Battery partially discharged.
C (white)
Battery more than half discharged.
B (red)
Low battery. Charge as soon as possible.
A (blinks red)
Battery exhausted. Turn camera o and recharge battery.
P
18
Basic Setup
Basic Setup
A language-selection dialog is displayed the  rst time the camera is turned on. Set up the camera
as described below (you can reset the clock or change languages at any time using the F DATE/
TIME or Q a options in the setup menu; for information on displaying the setup menu, see
page 83).
1
Choose a language.
START MENU
NOSET
ENGLISH
FRANCAIS
DEUTSCH
Highlight a language and press MENU/OK.
R Press DISP/BACK to skip the current step. Any steps you skip will be dis-
played the next time the camera is turned on.
2
Set the date and time.
NO
SET
YY. MM. DD
DATE/TIME NOT SET
1. 1
2013
12
:
00
AM
2012
2011
2015
2014
Press the selector left or right to highlight the year, month, day, hour,
or minute and press up or down to change. To change the order in
which the year, month, and day are displayed, highlight the date for-
mat and press the selector up or down. Press MENU/OK to exit to shoot-
ing mode when settings are complete.
R If the battery is removed for an extended period, the camera clock will be reset and the language-selection
dialog will be displayed when the camera is turned on.
19
First Steps
The
The
DISP/BACK
DISP/BACK
Button
Button
Press DISP/BACK to cycle through display modes as
follows:
Shooting
M
200F5.61000
2
1
0
-1
-2
2
1
0
-1
-2
F
100
M
F5.61000
200
2
1
0
-1
-2
INFORMATION 1 INFORMATION 2
F
100
M
F5.61000
200
2
1
0
-1
-2
CUSTOM INFORMATION OFF
R INFORMATION 1 is available only when an option
other than x TRACKING is selected for F FOCUS
MODE in modes P, S, A, and M.
Custom Display
Custom Display
Choose items for display using the v DISP. CUS-
TOM SETTING option in the shooting menu (P 72):
Framing grid Flash mode
Focus distance (autofocus) White balance
Focus distance (manual focus) Film simulation
Histogram Dynamic range
Exposure (shutter speed, aperture, and
sensitivity)
Number of exposures remaining/
media
Exposure compensation/exposure indicator Image quality and size
Metering Battery level
R To view the selected items, press DISP/BACK to cy-
cle through display modes until CUSTOM indica-
tors are displayed.
R See pages 6 7 for the locations of these items in
the displays.
20
The DISP/BACK Button
Playback
Indicators displayed Indicators hidden Favorites Photo information
12 /31 /2050 10 : 00
AM
3:2
F
100-0001
1 /1000
1 /1000
F5. 6
F5. 6
+
1
/
3
+
1
/
3
200200200
200
100-0001
3
12 /31 /2050
12 /31 /2050
10 : 00
AM
10 : 00
AM
3:2
F
ISO
200
1/1000
12 /31 /2050
OFF
:
:
:
F
4.5
10:00
AM
100-0001
-
1
2
/
3
:
Histograms
Histograms
Histograms show the distribution of tones in the im-
age. Brightness is shown by the horizontal axis, the
number of pixels by the vertical axis.
Shadows Highlights
No. of pixels
Pixel brightness
Optimal exposure: Pixels are distrib-
uted in an even curve through-
out the tone range.
Overexposed: Pixels are clustered
on the right side of the graph.
Underexposed: Pixels are clustered
on the left side of the graph.
Detailed Information
Detailed Information
q
q
Dynamic range
Dynamic range
w
w
Image size and quality
Image size and quality
e
e
Sensitivity
Sensitivity
:
:
:
:OFF
ISO
400
1/250
F
4.5
2
3
-
1
12/ 31/2050 10: 00
AM
100-0001
4:3
N
r
r
Shutter speed/aperture
Shutter speed/aperture
t
t
Film simulation
Film simulation
y
y
Flash mode
Flash mode
u
u
White balance
White balance
i
i
Exposure compensation
Exposure compensation
o
o
Frame number
Frame number
!0
!0
Picture (overexposed areas blink on and o )
Picture (overexposed areas blink on and o )
!1
!1
Histogram
Histogram
21
Basic Photography and Playback
Basic Photography and Playback
Basic Photography and Playback
Taking Photographs
Taking Photographs
This section explains basic photography.
1
Select S mode.
Rotate the mode dial to S (ADVANCED SR
AUTO). The following information will be dis-
played in the LCD monitor.
Scene Icon
Scene Icon
The camera automatically selects the appropriate
scene.
The
The
o
o
Icon
Icon
In S mode, the camera continuously adjusts fo-
cus and searches for faces, increasing the drain on
the battery; in addition, the sound of the camera
focusing may be audible. o is displayed in the
LCD monitor.
R The Q button can be used to view and adjust
camera settings (P 32).
22
Taking Photographs
2
Ready the camera.
Hold the camera steady
with both hands and brace
your elbows against your
sides. Shaking or unsteady
hands can blur your shots.
To prevent pictures that
are out of focus or too dark
(underexposed), keep your
ngers and other objects
away from the lens,  ash,
and AF-assist illuminator.
3
Frame the picture.
Use the zoom ring to frame
the picture in the display.
Zoom ring
4
Focus.
Frame the picture with your sub-
ject in the center of the display and
press the shutter button halfway to
focus.
R If the subject is poorly lit, the AF-assist illumina-
tor may light (P 75).
If the camera is able to focus, it will beep twice
and focus area will glow green. Focus and
exposure will lock while the shutter button is
pressed halfway.
If the camera is unable to focus, the focus frame
will turn red, and s will be displayed. If the
subject is close to the camera (the actual dis-
tance varies with the lens; for more informa-
tion, see the lens manual), select macro mode
and try again (P 29).
5
Shoot.
Smoothly press the shutter button
the rest of the way down to take the
picture.
23
Basic Photography and Playback
Viewing Pictures
Viewing Pictures
Viewing Pictures Full Frame
Viewing Pictures Full Frame
Pictures can be viewed in the LCD monitor. When
taking important pictures, take a test shot and
check the results.
To view pictures full frame, press a.
100-0001
100-0001
1 /1000
1 /1000 F
F
4.
4. 5
F4. 5
2
2
3
3
Additional pictures can be viewed by
pressing the selector left or right or ro-
tating the main command dial. Press
the selector or rotate the dial right to view pic-
tures in the order recorded, left to view pictures in
reverse order. Keep the selector pressed to scroll
rapidly to the desired frame.
R Pictures taken using other cameras are indicated by
a m (“gift image”) icon during playback.
Favorites: Rating Pictures
Favorites: Rating Pictures
To rate the current picture, press DISP/BACK and press
the selector up and down to select from zero to  ve
stars.
Zooming in on the Focus Point
Zooming in on the Focus Point
Press the center of the sub-com-
mand dial to zoom in on the focus
point. Press the center of the sub-
command dial again to return to
full-frame playback.
24
Viewing Pictures
Playback Zoom
Playback Zoom
Rotate the sub-command dial to zoom in or out
on pictures in full-frame playback.
100-0001
100-0001
R To display multiple images, ro-
tate the sub-command dial left
when a picture is displayed full
frame.
Zoom indicator
When the picture is zoomed in, the selector can
be used to view areas of the image not currently
visible in the display. To exit zoom, press DISP/BACK,
MENU/OK, or the center of the sub-command dial.
Navigation window shows
portion of image currently
displayed
R The maximum zoom ratio varies with image size
(P 70). Playback zoom is not available with cropped
or resized copies saved at a size of a.
25
Basic Photography and Playback
Viewing Pictures
Multi-Frame Playback
Multi-Frame Playback
To view multiple images, rotate the sub-comand dial left when a picture is displayed full frame. Use the
sub-command dial to choose the number of images displayed.
Rotate the sub-command
dial left to view more
images.
100-0001
100-0001
Rotate the sub-command
dial right to view fewer
images.
Use the selector to highlight images and press MENU/OK to view the highlighted image full frame. In
the nine- and hundred-frame displays, press the selector up or down to view more pictures.
26
Deleting Pictures
Deleting Pictures
To delete individual pictures, multiple selected pictures, or all pictures,
press the selector up (b), and choose from the options below. Note that
deleted pictures can not be recovered. Copy important pictures to a com-
puter or other storage device before proceeding.
BACKSET
ERASE
ALL FRAMES
SELECTED FRAMES
FRAME
Option
Option
Description
Description
FRAME
FRAME
Press the selector left or right to scroll through pictures and press MENU/OK to delete the current picture (a
con rmation dialog is not displayed).
SELECTED FRAMES
SELECTED FRAMES
Highlight pictures and press MENU/OK to select or deselect (pictures in photobooks or print orders are shown
by S). When the operation is complete, press DISP/BACK to display a con rmation dialog, then highlight OK
and press MENU/OK to delete the selected pictures.
ALL FRAMES
ALL FRAMES
A con rmation dialog will be displayed; highlight OK and press MENU/OK to delete all unprotected pictures.
Pressing DISP/BACK cancels deletion; note that any pictures deleted before the button was pressed can not
be recovered.
R Protected pictures can not be deleted. Remove protection from any pictures you wish to delete (P 78).
R Pictures can also be deleted by A ERASE from playback menu.
R If a message appears stating that the selected images are part of a DPOF print order, press MENU/OK to delete
the pictures.
27
Basic Photography and Playback
Using the Flash
Using the Flash
Use the built-in  ash for additional lighting when shooting at night or indoors under low light.
1
Press the N button to raise the  ash.
Q The  ash may contact accessories mounted on the hot shoe. If necessary,
remove accessories before raising the  ash.
2
Select p FLASH MODE in the shooting menu. The options shown below will
be displayed; press the selector up or down to highlight an option and press
MENU/OK to select.
Mode
Mode
Description
Description
AUTO
AUTO
(AUTO FLASH)
(AUTO FLASH)
/
/
K
K
(RED EYE REDUCTION)
(RED EYE REDUCTION)
*
*
The  ash  res when required. Recommended in most situations.
N
N
(FORCED FLASH)
(FORCED FLASH)
/
/
L
L
(FORCED FLASH)
(FORCED FLASH)
*
*
The  ash  res whenever a picture is taken. Use for backlit subjects or for natu-
ral coloration when shooting in bright light.
O
O
(SLOW SYNCHRO)
(SLOW SYNCHRO)
/
/
M
M
(RED EYE & SLOW)
(RED EYE & SLOW)
*
*
Capture both the main subject and the background under low light (note that
brightly lit scenes may be overexposed).
l
l
(2ND CURTAIN SYNC.)
(2ND CURTAIN SYNC.)
/
/
d
d
(2ND CURTAIN SYNC.)
(2ND CURTAIN SYNC.)
*
*
The  ash  res immediately before the shutter closes.
D
D
(COMMANDER)
(COMMANDER)
The built-in  ash can be used to control optional remote  ash units.
5
P
SHOOTING MENU
OFF
AUTO
OFF
±
0
OFF
±
0
OFF
FLASH MODE
O
AUTO
FORCED FLASH
SLOW SYNCHRO
2ND CURTAIN SYNC.
COMMANDER
* When Intelligent Face Detection is active (P 74) and ON is selected for B RED EYE
REMOVAL in the setup menu (P 79), red-eye removal is available in K, L, M, and d.
Red-eye removal minimizes red-eye caused when light from the  ash is re ected from
the subjects retinas as shown in the illustration at right.
28
Using the Flash
Q Depending on the distance to the subject, some lenses may cast shadows in photos taken with the  ash.
R Lower the  ash where  ash photography is prohibited or to capture natural lighting under dim light. We also
recommend that you lower the  ash when the camera is o .
R If p is displayed when the shutter button is pressed halfway, the  ash will  re when the photo is taken.
R Except in commander mode, the  ash may  re several times with each shot. Do not move the camera until
shooting is complete.
Flash Sync Speed
Flash Sync Speed
The  ash will synchronize with the shutter at shutter speeds of 
/
 s or slower.
Optional Flash Units
Optional Flash Units
The camera can also be used with optional FUJIFILM shoe-mounted  ash units. Do not use third-party  ash
units that apply over 300 V to the camera hot shoe.
29
Basic Photography and Playback
Macro Mode (Close-ups)
Macro Mode (Close-ups)
To focus at short distances, press the selector left (F). To exit macro mode, select
OFF.
R The distances at which the camera will focus in macro mode vary with the lens. See the
lens manual for details.
OFF
P
30
Basic Movie Recording and Playback
Basic Movie Recording and Playback
Recording High-De nition (HD) Movies
Recording High-De nition (HD) Movies
The camera can be used to record short high-de nition movies. During recording,
y
and the time re-
maining will be displayed in the LCD monitor and sound will be recorded via the built-in microphone
(be careful not to cover the microphone during recording).
1
Press t to start recording.
Time remaining
12m34s
12m34s
2
To end recording, press the t button again.
Recording ends automatically when the mov-
ie reaches maximum length or memory is full.
R Zoom can be adjusted while recording is in prog-
ress.
R The movie size can be selected using the W MOVIE
SET-UP > MOVIE MODE option (P 75).
R Use the W MOVIE SET-UP > FOCUS MODE option
to choose how the camera focuses during movie
recording.
R The color and brightness of the image may vary
from those displayed before recording begins.
R The indicator lamp lights while movies are being
recorded.
Q The microphone may pick up lens noise and other
sounds made by the camera during recording.
Q Vertical or horizontal streaks may appear in movies
containing very bright subjects. This is normal and
does not indicate a malfunction.
Depth of Field
Depth of Field
Manual aperture adjustment is available in shooting
modes A and M; adjust aperture before recording
begins. Choose low f-numbers to soften background
details. The e ect can be heightened by increasing
the distance between your subject and the back-
ground.
31
Basic Movie Recording and Playback
Viewing Movies
Viewing Movies
During playback, movies are displayed as shown at right. The following operations
can be performed while a movie is displayed:
Operation
Operation
Description
Description
Start/pause playback
Start/pause playback
Press the selector down to start playback. Press again to pause. While playback is
paused, you can press the selector left or right to rewind or advance one frame
at a time.
End playback
End playback Press the selector up to end playback.
Adjust speed
Adjust speed Press the selector left or right to adjust playback speed during playback.
Adjust volume
Adjust volume
Press MENU/OK to pause playback and display volume controls. Press the selec-
tor up or down to adjust the volume; press MENU/OK again to resume playback.
Volume can also be adjusted using b SOUND SET-UP > PLAYBACK VOLUME
option in the playback menu (P 84).
Movie icon
100-0006
PLAY
Progress is shown in the display during playback.
Q Do not cover the speaker during playback.
Q Sound is not played back in silent mode.
Progress bar
PAUSESTOP
15
s
Playback Speed
Playback Speed
Press the selector left or right to adjust playback speed during playback. Speed is shown by the
number of arrows (M or N).
Arrow
PAUSESTOP
15
s
32
The Q (Quick Menu) Button
The Q (Quick Menu) Button
Press Q for quick access to the following items. For more information on the options available, see the
pages listed below.
DYNAMIC RANGE
SET
3:2
F
400
A
A SHOOTING MODE ................................... 33
B
F FOCUS MODE .......................................... 74
C
N ISO ........................................................... 47
D
U DYNAMIC RANGE ................................... 71
E
h NOISE REDUCTION ................................. 72
F
O IMAGE SIZE ............................................. 70
G
T IMAGE QUALITY ..................................... 71
H
P FILM SIMULATION ................................. 61
I
r HIGHLIGHT TONE ................................... 71
J
s SHADOW TONE ....................................... 72
K
f COLOR ..................................................... 71
L
q SHARPNESS ............................................ 71
M
B SELF-TIMER ............................................ 57
N
L IS MODE .................................................. 73
O
p FLASH MODE .......................................... 27
P
J LCD BRIGHTNESS ................................... 84
1
Press Q to display the quick menu during shooting.
2
Use the selector to highlight items and rotate the main/sub-com-
mand dial to change.
3
Press Q to exit when settings are complete.
33
More on Photography and Playback
More on Photography and Playback
More on Photography and Playback
Shooting Mode
Shooting Mode
Choose a shooting mode according to the scene or type of subject.
To choose a shooting mode, rotate the mode dial to the desired set-
ting. The following modes are available:
S (ADVANCED SR AUTO): The camera automati-
cally optimizes settings to the scene (P 34).
B (AUTO): A simple “point-and-shoot mode
recommended for  rst-time users of digital
cameras (P 34).
SP SCENE POSITION/N/M/h: Choose a scene suited to the subject or
shooting conditions and let the camera do the rest (P 38).
S, A, M: Select for full control over camera settings, including aperture
(M and A) and/or shutter speed (M and S) (P 41, 42, 43).
P: Aperture and shutter speed can be adjust-
ed using program shift (P 40).
C (CUSTOM): Recall stored settings for modes P,
S, A, and M (P 44).
Adv. (ADVANCED): Sophisticated techniques
made easy (P 35).
34
Shooting Mode
S
S
ADVANCED SR AUTO
ADVANCED SR AUTO
When the mode dial is rotated to S,
the camera automatically optimizes
settings to suit the scene.
The scene is shown by an icon
in the display.
a AUTO
c LANDSCAPE
d NIGHT
h NIGHT (TRIPOD)
e MACRO u BEACH
v SUNSET w SNOW
x SKY y GREENERY
z SKY & GREENERY d PORTRAIT
g BACKLIT PORTRAIT c MOVING OBJECT
a PORTRAIT&MOTION b BACKLIT PORTRAIT&MOTION
Q The mode selected may vary with shooting condi-
tions. If the mode and subject do not match, select
B mode or choose SP (P 38) and select a scene
manually.
B
B
AUTO
AUTO
Choose for crisp, clear snapshots. This
mode is recommended in most situa-
tions.
S
S
ADVANCED SR AUTO Versus
ADVANCED SR AUTO Versus
B
B
AUTO
AUTO
In these modes, the camera adjusts shutter speed
and other exposure settings automatically; in S
mode, the camera also automatically optimizes set-
tings to suite the scene. Note that in S mode, the
camera focuses continuously, increasing the drain on
the battery, and that the sound of the camera focus-
ing may be audible. Choose B mode for quieter fo-
cusing or to reduce the drain on the battery.
35
More on Photography and Playback
Shooting Mode
Adv.
Adv.
ADVANCED
ADVANCED
This mode combines point-and-shoot simplicity with sophisticated photographic tech-
niques.
R A Adv. MODE supports exposure compensation (P 55) and program shift (P 40).
1
Press MENU/OK while the mode description is displayed.
R If the view through the lens is displayed in the LCD monitor, press MENU/OK and select
A Adv. MODE in the shooting menu.
M
Adv.
SP
ANOTHER Adv. MODE
Take special images
with checking effects
by various filters.
ADVANCED FILTER
2
Highlight Y ADVANCED FILTER (P 36) or j MULTIPLE EXPOSURE (P 37)
and press MENU/OK.
Take special images
with checking effects
by various filters.
SET CANCEL
G
ADVANCED FILTER
36
Shooting Mode
Y ADVANCED FILTER
Take photos with  lter e ects. Choose from the following  lters.
Filter
Filter
Description
Description
G
G
TOY CAMERA
TOY CAMERA
Choose for a retro toy camera e ect.
H
H
MINIATURE
MINIATURE
The tops and bottoms of pictures are blurred for a diorama e ect.
I
I
POP COLOR
POP COLOR
Create high-contrast images with saturated colors.
J
J
HIGH-KEY
HIGH-KEY
Create bright, low-contrast images.
Z
Z
LOW-KEY
LOW-KEY
Create uniformly dark tones with few areas of emphasized highlights.
K
K
DYNAMIC TONE
DYNAMIC TONE
Dynamic tone expression is used for a fantasy e ect.
X
X
SOFT FOCUS
SOFT FOCUS
Create a look that is evenly soft throughout the whole image.
u
u
PARTIAL COLOR (RED)
PARTIAL COLOR (RED)
Areas of the image that are the selected color are recorded in that color. All others areas of the
image are recorded in black-and-white.
v
v
PARTIAL COLOR (ORANGE)
PARTIAL COLOR (ORANGE)
w
w
PARTIAL COLOR (YELLOW)
PARTIAL COLOR (YELLOW)
x
x
PARTIAL COLOR (GREEN)
PARTIAL COLOR (GREEN)
y
y
PARTIAL COLOR (BLUE)
PARTIAL COLOR (BLUE)
z
z
PARTIAL COLOR (PURPLE)
PARTIAL COLOR (PURPLE)
R Depending on the subject and camera settings, images may in some cases be grainy or vary in brightness and
hue.
37
More on Photography and Playback
Shooting Mode
j MULTIPLE EXPOSURE
Create a photograph that combines two exposures.
+
1
Take the  rst shot.
2
Press MENU/OK. The  rst shot will be shown superimposed on the view through the lens as a guide
to taking the second shot.
R To return to Step 1 and retake the  rst shot, press the selector left. To save the  rst shot and exit without
creating a multiple exposure, press DISP/BACK.
3
Take the second shot.
4
Press MENU/OK to create the multiple exposure, or press the selector left to return to Step 3 and
retake the second shot.
38
Shooting Mode
SP
SP
SCENE POSITION /
SCENE POSITION /
N
N
/
/
M
M
/
/
h
h
The camera o ers a choice of scenes, each adapted to particular shooting conditions or a
speci c type of subject. The following scenes can be selected directly using the mode dial:
Scene
Scene
Description
Description
N
N
SPORT
SPORT
Choose when photographing moving subjects.
M
M
LANDSCAPE
LANDSCAPE
Choose for daylight shots of buildings and landscapes.
h
h
PORTRAIT
PORTRAIT
Choose for portraits.
Other scenes can be selected by rotating the mode dial to SP and following the steps below.
1
Press MENU/OK while the mode description is displayed.
R If the view through the lens is displayed in the LCD monitor, press MENU/OK and select
A SCENE POSITION in the shooting menu.
SP
Adv.
ANOTHER SCENE
Shoots face skin
appear smooth
PORTRAIT ENHANCER
2
Highlight one of the following options and press MENU/OK.
Shoots face skin
appear smooth
SET CANCEL
Z
PORTRAIT ENHANCER
39
More on Photography and Playback
Shooting Mode
Scene
Scene
Description
Description
Z
Z
PORTRAIT ENHANCER
PORTRAIT ENHANCER
Choose for a smooth skin e ect when shooting portraits.
O
O
NIGHT
NIGHT
Choose this mode for poorly lit twilight or night scenes.
H
H
NIGHT (TRIPOD)
NIGHT (TRIPOD)
Choose this mode for slow shutter speeds when shooting at night.
p
p
FIREWORKS
FIREWORKS
Slow shutter speeds are used to capture the expanding burst of light from a  rework.
Q
Q
SUNSET
SUNSET
Choose this mode to record the vivid colors in sunrises and sunsets.
R
R
SNOW
SNOW
Choose for crisp, clear shots that capture the brightness of scenes dominated by shining white
snow.
s
s
BEACH
BEACH
Choose for crisp, clear shots that capture the brightness of sunlit beaches.
U
U
PARTY
PARTY
Capture indoor background lighting under low-light conditions.
V
V
FLOWER
FLOWER
Choose for vivid close-ups of  owers.
W
W
TEXT
TEXT
Take clear pictures of text or drawings in print.
40
Shooting Mode
Program AE (P)
Program AE (P)
In this mode, the camera adjusts shutter speed and aperture for optimal exposure.
Q If the subject is outside the metering range of the camera, the shutter speed and aperture
displays will show “– –”.
P
200
±
0
Program Shift
Program Shift
Rotate the sub-command dial to choose the desired combination of shutter speed
and aperture (program shift). The new values for shutter speed and aperture are
shown in yellow. Program shift is not available if the attached  ash supports TTL
auto, AUTO is selected for U DYNAMIC RANGE in the shooting menu (P 71), or
an auto option is selected for N ISO in the shooting menu (P 47). To cancel pro-
gram shift, turn the camera o .
F5.6
P
1000 200
±
0
Shutter speed
Aperture
R For information on the roles of the main and sub-command dials, see page 122.
41
More on Photography and Playback
Shooting Mode
Shutter-Priority AE (S)
Shutter-Priority AE (S)
In this mode, you choose the shutter speed by rotating the sub-command dial, while the
camera adjusts aperture for optimal exposure.
Q If the correct exposure can not be achieved at the selected shutter speed, aperture will be
displayed in red when the shutter button is pressed halfway. Adjust shutter speed until
the correct exposure is achieved.
Q If the subject is outside the metering range of the camera, the aperture display will show
“– – –”.
S
1000 200
±
0
Long Time-Exposures
Long Time-Exposures
Shutter speeds of 1 s or slower are referred to as “long time-exposures”.
30”
30
R Use of a tripod is recommended to prevent the camera from moving during the exposure.
R A count-down timer will be displayed while the exposure is in progress.
R To reduce “noise (mottling) in long time-exposures, select ON for K LONG EXPOSURE NR in the shooting menu (P 72).
Note that this may increase the time needed to record images after shooting.
R An optional RR-90 remote release can be used for long time-exposures.
R For information on the roles of the main and sub-command dials, see page 122.
42
Shooting Mode
Aperture-Priority AE (A)
Aperture-Priority AE (A)
In this mode, you choose the aperture by rotating the sub-command dial, while the camera
adjusts shutter speed for optimal exposure.
Q If the correct exposure can not be achieved at the selected aperture, the shutter speed
will be displayed in red when the shutter button is pressed halfway. Adjust aperture until
the correct exposure is achieved.
Q If the subject is outside the metering range of the camera, the shutter speed display will
show “– – –”.
F5.6
A
±
0
200
Previewing Depth of Field
Previewing Depth of Field
When L PREVIEW DEPTH OF FIELD is selected for F FUNCTION (Fn) SETTING
(P 64) in the shooting menu, pressing the Fn button stops aperture down to the
selected setting, allowing depth of  eld to be previewed in the LCD monitor.
R For information on the roles of the main and sub-command dials, see page 122.
43
More on Photography and Playback
Shooting Mode
Manual Exposure (M)
Manual Exposure (M)
In this mode, you control both shutter speed and aperture. Rotate the main command dial
to choose a shutter speed and the sub-command dial to choose the aperture.
R The manual exposure display includes an exposure indicator that shows the amount the
picture would be under- or over-exposed at current settings.
2
1
0
-1
-2
2
1
0
-1
-2
F5.6
M
1000 200
Bulb Photography
Bulb Photography
For bulb photography, rotate the main command dial to select a shutter speed of BULB.
2
1
0
-1
-2
2
1
0
-1
-2
F5.6
M
BULB
200
R Use of a tripod is recommended to prevent the camera from moving during the exposure.
R A count-down timer will be displayed while the exposure is in progress.
R To reduce “noise (mottling) in long time-exposures, select ON for K LONG EXPOSURE NR in the shooting menu (P 72).
Note that this may increase the time needed to record images after shooting.
R An optional RR-90 remote release can be used for long time-exposures.
R For information on the roles of the main and sub-command dials, see page 122.
44
Shooting Mode
Custom Mode (C)
Custom Mode (C)
In P, S, A, and M modes, the K CUSTOM SET option in the shooting menu can be used to
save current camera and menu settings. These settings are recalled whenever the mode dial
is rotated to C (custom mode).
Menu/setting
Menu/setting
Settings saved
Settings saved
Shooting menu
Shooting menu
N ISO, O IMAGE SIZE, T IMAGE QUALITY, U DYNAMIC RANGE, P FILM SIMULATION, f COLOR,
q SHARPNESS, r HIGHLIGHT TONE, s SHADOW TONE, h NOISE REDUCTION, C PHOTOMETRY,
b FACE DETECTION, F FOCUS MODE, C AF ILLUMINATOR, p FLASH MODE,
I FLASH COMPENSATION, W MOVIE SET-UP (MOVIE MODE/FOCUS MODE)
Other
Other
White balance (WB), burst mode (I), macro mode (F), exposure settings, monitor display options (DISP/BACK)
45
More on Photography and Playback
White Balance
White Balance
For natural colors, press the selector right (WB) to display the following options, then
use the selector to highlight an option that matches the light source and press
MENU/OK. The dialog shown at bottom right will be displayed; use the selector to
ne-tune white balance or press DISP/BACK to exit without  ne-tuning.
SHIFT
SET
WHITE BALANCE
AUTO
SET
WB SHIFT
Option
Option
Description
Description
AUTO
AUTO White balance adjusted automatically.
h
h Measure a value for white balance (P 46).
i
i
For subjects in direct sunlight.
j
j
For subjects in the shade.
Option
Option
Description
Description
k
k
Use under daylight” uorescent lights.
l
l
Use under “warm white” uorescent lights.
m
m
Use under cool white uorescent lights.
n
n
Use under incandescent lighting.
R White balance is adjusted for  ash lighting only in AUTO mode. Turn the  ash o using other white balance
options.
R Results vary with shooting conditions. Play pictures back after shooting to check colors.
46
White Balance
h
h
: Custom White Balance
: Custom White Balance
Choose h to adjust white balance for unusual lighting conditions. White balance measurement options will
be displayed; frame a white object so that it  lls the display and press the shutter button all the way down to
measure white balance (to select the most recent custom value and exit without measuring white balance,
press DISP/BACK, or press MENU/OK to select the most recent value and display the  ne-tuning dialog).
If “COMPLETED!” is displayed, press MENU/OK to set white balance to the measured value.
If “UNDER” is displayed, raise exposure compensation (
P 55) and try again.
If “OVER” is displayed, lower exposure compensation (P 55) and try again.
47
More on Photography and Playback
Sensitivity
Sensitivity
“Sensitivity refers to the cameras sensitivity to light. Choose from values between 200 and 6400, or
select L (100), H (12800), or H (25600) for special situations. Higher values can be used to reduce
blur when lighting is poor, while lower values allow slower shutter speeds or wider apertures in bright
light; note, however, that mottling may appear in pictures taken at high sensitivities, particularly at
H (25600), while choosing L (100) reduces dynamic range. Values of from ISO 200 to ISO 6400 are
recommended in most situations. If AUTO is selected, the camera will adjust sensitivity automatically
in response to shooting conditions.
1
Press MENU/OK in shooting mode to display the shooting menu. Press
the selector up or down to highlight N ISO and press MENU/OK.
1
P
ISO
PROGRAM AE
SHOOTING MENU
IMAGE SIZE
IMAGE QUALITY
DYNAMIC RANGE
FILM SIMULATION
FILM SIMULATION BKT
EXIT
3
:
2
F
AUTO
2
Press the selector up or down to highlight the desired option and
press MENU/OK to select.
P
200
±
0
1
P
ISO
SHOOTING MENU
3
:
2
F
3
:
2
F
プログラム
AUTO
O
500
400
320
250
200
L
(
100
)
AUTO
1/60200 800
R Sensitivity is not reset when the camera is turned o .
R L (100) is reset to ISO 200 and H (12800) and H (25600) are reset to ISO 6400 when RAW, FINE+RAW, or
NORMAL+RAW is selected for image quality (P 71). For more information on the settings available with
L (100), H (12800), and H (25600), see page 128.
48
Sensitivity
AUTO
The following options are available when AUTO is selected:
Option
Option
Default
Default
DEFAULT SENSITIVITY
200
200
MAX. SENSITIVITY
800
800
MIN. SHUTTER SPEED
1/60
1/60
The camera automatically chooses a sensitivity between the default and maximum values. Sensitiv-
ity is only raised above the default value if the shutter speed required for optimal exposure would be
slower than the value selected for MIN. SHUTTER SPEED.
R If the value selected for DEFAULT SENSITIVITY is higher than that selected for MAX. SENSITIVITY, DEFAULT
SENSITIVITY will be set to the value selected for MAX. SENSITIVITY.
R The camera may select shutter speeds slower than MIN. SHUTTER SPEED if pictures would still be underex-
posed at the value selected for MAX. SENSITIVITY.
49
More on Photography and Playback
Focus Mode
Focus Mode
Choose how the camera focuses (note that re-
gardless of the option selected, manual focus will
be used when a manual focus lens is attached).
1
Press MENU/OK in shooting mode to
display the shooting menu. Press
the selector up or down to highlight
F FOCUS MODE and press MENU/OK.
2
Press the selector up or down to high-
light the desired option and press
MENU/OK to select.
4
P
SHOOTING MENU
FOCUS MODE
AE-L
ON
PEAK
PEAK
ON
OFFOFF
AE-L
O
MANUAL
MULTI
AREA
CONTINUOUS
TRACKING
Option
Option
Description
Description
p MANUAL
Choose for manual control of focus or in
situations in which the camera is unable
to focus using autofocus (P 54).
s MULTI
When the shutter button is pressed half-
way, the camera detects high-contrast
subjects near the center of the frame
and selects the focus area automatically.
t AREA Choose the focus area manually (P 52).
u CONTINUOUS
The camera continuously adjusts focus
to re ect changes in the distance to the
subject in the focus frame.
x TRACKING
Position the subject in the focus target
and press the selector left. The camera
will track the subject and adjust focus as
it moves through the frame.
50
Focus Mode
p MANUAL
When p MANUAL is selected for F FOCUS MODE, you can focus manually using the lens focus ring.
Rotate the ring left to reduce the focus distance, right to increase. The manual focus indicator indicates
how closely the focus distance matches the distance to the subject in the focus brackets (the red bar
indicates the focus distance, the white bar the depth of  eld, or in other words the distance in front of
and behind the focus point that appears to be in focus); you can also check focus visually in the LCD
monitor. Choose for manual control of focus or in situations in which the camera is unable to focus
using autofocus (P 54).
Reduce focus
distance
Increase focus
distance
2
1
0
-1
-2
2
1
0
-1
-2
F5.6
M
1000 200
Manual focus
mode icon
Manual focus
indicator
Focus distance
(red bar)
Depth of  eld
(white bar)
R Use the I FOCUS RING option in the setup menu (P 85) to reverse the direction of rotation of the focus ring.
R The camera will not focus if the focus ring is rotated past in nity.
R INSTANT AF can be assigned to the Fn button, allowing the button to be used to quickly focus on the subject
in the selected focus frame when the camera is in manual focus mode. Alternatively, the Fn button can be as-
signed AE/AF LOCK to allow the button to be used to lock autoexposure during manual focus.
R Selecting FOCUS PEAK HIGHLIGHT for c MF ASSIST highlights high-contrast outlines. Rotate the focus ring
until the subject is highlighted.
R The camera can show focus distance in meters or feet. Use the M FOCUS SCALE UNITS option in the setup
menu (P 86) to choose the units used.
51
More on Photography and Playback
Focus Mode
Manual Focus: Checking Focus
Manual Focus: Checking Focus
In manual focus mode, you can press the center of the sub-command dial to magnify the view in the
LCD monitor. To view other areas of the frame, press the selector up (AF) and then use the selector
to scroll the display.
2
1
0
-1
-2
2
1
0
-1
-2
F5.6
M
1000 200
2
1
0
-1
-2
2
1
0
-1
-2
F5.6
M
1000 200
52
Focus Mode
Focus Frame Selection
Focus Frame Selection
When t AREA is selected for
F
F FOCUS MODE, the camera of-
fers a choice of focus points allowing photographs to be com-
posed with the main subject positioned almost anywhere in the
frame. Press the selector up (AF) and then use the selector to
position the focus frame (the focus frame can be returned to the
center by pressing DISP/BACK). Press MENU/OK to put the setting
into e ect.
Q Turn Intelligent Face Detection o when using manual focus point
selection (P 74).
Focus frame
Focus point
To choose the size of the focus frame, press the selector up (AF)
and rotate the sub-command dial. Rotate the dial left to reduce
the frame by up to 50%, right to enlarge it by up to 150%, or press
the center of the dial to restore the frame to its original size. Press
MENU/OK to put the setting into e ect.
53
More on Photography and Playback
Focus/Exposure Lock
Focus/Exposure Lock
To compose photographs with o -center subjects:
1
Focus: Position the subject in the focus frame and press the shutter button half-
way to lock focus and exposure. Focus and exposure will remain locked while
the shutter button is pressed halfway (AF/AE lock).
P
±
0
200
R If AE/AF LOCK is assigned to the Fn button (P 64), the focus and/or exposure will lock while the Fn button
is pressed and remain locked even when the shutter button is pressed halfway. To choose whether the
Fn button locks focus, exposure, or both, use the v AE/AF LOCK BUTTON option in the shooting menu
(P 75).
2
Recompose: Keep the shutter button pressed halfway or keep the Fn button
pressed.
P
±
0
200
3
Shoot: Press the button all the way down.
P
±
0
200
54
Focus/Exposure Lock
Autofocus
Autofocus
Although the camera boasts a high-precision autofocus system, it may be unable to focus on the subjects listed
below.
Very shiny subjects such as mirrors or car bodies.
• Fast-moving subjects.
Subjects photographed through a window or other re ective object.
Dark subjects and subjects that absorb rather than re ect light, such as hair or fur.
Insubstantial subjects, such as smoke or  ame.
• Subjects that show little contrast with the background (for example, subjects in clothing that is the same color
as the background).
Subjects positioned in front of or behind a high-contrast object that is also in the focus frame (for example, a
subject photographed against a backdrop of highly contrasting elements).
55
More on Photography and Playback
Exposure Compensation
Exposure Compensation
Rotate the main command dial to adjust exposure when photographing very bright, very
dark, or high-contrast subjects. The e ect is visible in the display.
Exposure compensation indicator
2
1
0
-1
-2
2
1
0
-1
-2
P
+
1
/
3
200
Rotate the dial right to choose
higher values and increase
exposure
Rotate the dial left to choose
lower values and reduce
exposure
Exposure Value (EV)
Exposure Value (EV)
The exposure value is determined by the sensitiv-
ity of the image sensor and the amount of light to
which the sensor is exposed. Doubling the amount
increases EV by one, while halving it reduces EV by
one. The amount of light entering the camera can be
controlled by adjusting aperture and shutter speed.
Choosing an Exposure Compensation Value
Choosing an Exposure Compensation Value
Backlit subjects: Choose values
from +
/
EV to +1
/
 EV.
Highly re ective subjects or very
bright scenes (e.g., snow elds): +1 EV
Scenes that are mostly sky: +1 EV
Spotlit subjects (particularly if photographed against dark back-
grounds): –
/
 EV
Subjects with low re ectivity (pine trees or dark-colored foliage):
–
/
 EV
56
Metering
Metering
Choose how the camera meters exposure.
1
Press MENU/OK in shooting mode to display the shooting menu. Press
the selector up or down to highlight C PHOTOMETRY and press
MENU/OK.
2
Press the selector up or down to highlight the desired option and
press MENU/OK to select.
Mode
Mode
Description
Description
o
o
(MULTI)
(MULTI)
The camera instantly determines exposure based on an analysis of composi-
tion, color, and brightness distribution. Recommended in most situations.
p
p
(SPOT)
(SPOT)
The camera meters lighting conditions in an area at the center of the frame
equivalent to 2% of the total. Recommended with backlit subjects and in
other cases in which the background is much brighter or darker than the
main subject.
q
q
(AVERAGE)
(AVERAGE)
Exposure is set to the average for the entire frame. Provides consistent ex-
posure across multiple shots with the same lighting, and is particularly ef-
fective for landscapes and portraits of subjects dressed in black or white.
4
P
SHOOTING MENU
AE-L
ON
PEAK
PEAK
ON
OFFOFF
AE-L
PHOTOMETRY
O
MULTI
SPOT
AVERAGE
Q The selected option will only take e ect when Intelligent Face Detection is o (P 74).
57
More on Photography and Playback
Using the Self-Timer
Using the Self-Timer
Use the timer for self-portraits or to prevent blur caused by camera shake.
1
Press MENU/OK in shooting mode to display the shooting menu. Press
the selector up or down to highlight B SELF-TIMER and press MENU/
OK.
2
Press the selector up or down to highlight one of the following op-
tions and press MENU/OK to select.
Option
Option
Description
Description
R
R
2 SEC
2 SEC
The shutter is released two seconds after the shutter button is pressed. Use
to reduce blur caused by the camera moving when the shutter button is
pressed.
S
S
10 SEC
10 SEC
The shutter is released ten seconds after the shutter button is pressed. Use
for photographs in which you wish to appear yourself.
OFF
OFF Self-timer o .
2
SHOOTING MENU
0
0
0
0
0
ON
P
OFFSELF-TIMER
0
0
0
0
0
ON
O
2
SEC
10
SEC
OFF
3
Press the shutter button halfway to focus.
Q Stand behind the camera when using the shutter button. Standing in
front of the lens can interfere with focus and exposure.
58
Using the Self-Timer
4
Press the shutter button the rest of the way down to start the timer.
The display in the monitor shows the number of seconds remaining
until the shutter is released. To stop the timer before the picture is
taken, press DISP/BACK.
9
9
The self-timer lamp on the front of the camera will blink immediately
before the picture is taken. If the two-second timer is selected, the
self-timer lamp will blink as the timer counts down.
R The self-timer turns o automatically when the camera is turned o .
59
More on Photography and Playback
Continuous Shooting (Burst Mode)
Continuous Shooting (Burst Mode)
Capture motion in a series of pictures.
1
Press the selector down (I) when
the camera is in shooting mode.
STILL IMAGE
2
Press the selector up or down to
choose CONTINUOUS, and press left
or right to choose from frame rates
of approximately 5.6 fps (frames per
second) and 3.0 fps. Press MENU/OK
to proceed when settings are com-
plete.
5.6
fps
3
Press the shutter button halfway to
focus.
4
Press the shutter button the rest
of the way down to start shoot-
ing. Shooting ends when the shut-
ter button is released, the selected
number of pictures has been taken,
or the memory card is full.
R Focus and exposure are determined by the  rst
frame in each series. The  ash turns o automati-
cally; the previously-selected  ash mode is restored
when burst shooting is turned o .
R Frame rate varies with shutter speed and may slow
as more shots are taken.
R Additional time may be required to record pictures
when shooting ends.
R If  le numbering reaches 999 before shooting is
complete, the remaining pictures will be recorded
to a new folder (P 85).
R Burst shooting may not begin if the space available
on the memory card is insu cient.
60
Bracketing
Bracketing
Automatically vary settings over a series of pictures.
1
Press the selector down (I) when the camera is in shooting mode, and then
press the selector up or down to highlight one of the following:
Option
Option
Description
Description
AE BKT
AE BKT
Press the selector left or right to highlight a bracketing amount. Each time the
shutter button is pressed, the camera will take three shots: one using the metered
value for exposure, the second overexposed by the selected amount, and the third
underexposed by the same amount (regardless of the amount selected, exposure
will not exceed the limits of the exposure metering system).
ISO BKT
ISO BKT
Press the selector left or right to highlight a bracketing amount. Each time the
shutter is released, the camera will take a picture at the current sensitivity (P 47)
and process it to create two additional copies, one with sensitivity raised and the
other with sensitivity lowered by the selected amount (regardless of the amount
selected, sensitivity will not exceed ISO 6400 or fall below ISO 200).
FILM SIMULATION
FILM SIMULATION
BKT
BKT
Each time the shutter is released, the camera takes one shot and processes it to
create copies with the  lm simulation settings selected for X FILM SIMULATION
BKT in the shooting menu (P 71).
DYNAMIC RANGE
DYNAMIC RANGE
BKT
BKT
Each time the shutter button is pressed, the camera takes three shots with di erent
dynamic ranges (P 71): 100% for the  rst, 200% for the second, and 400% for the
third. While dynamic range bracketing is in e ect, sensitivity will be restricted to a
minimum of ISO 800; the sensitivity previously in e ect is restored when bracket-
ing ends.
AE BKT
±
1
±
2
/
3
±
1
/
3
Press MENU/OK to select the highlighted option.
2
Take photographs.
61
More on Photography and Playback
Film Simulation
Film Simulation
Simulate the e ects of di erent kinds of  lm, including black-and-white.
1
Press MENU/OK in shooting mode to display the shooting menu. Press
the selector up or down to highlight P FILM SIMULATION and
press MENU/OK.
2
Press the selector up or down to highlight one of the following options and press MENU/OK to select.
Option
Option
Description
Description
c
c
(PROVIA/STANDARD)
(PROVIA/STANDARD)
Standard color reproduction. Suited to a wide range of subjects, from portraits to landscapes.
>
>
(Velvia/VIVID)
(Velvia/VIVID)
A high-contrast palette of saturated colors, suited to nature photos.
e
e
(ASTIA/SOFT)
(ASTIA/SOFT)
Enhances the range of hues available for skin tones in portraits while preserving the bright blues
of daylight skies. Recommended for outdoor portrait photography.
b
b
(MONOCHROME)
(MONOCHROME)
Take pictures in standard black and white.
f
f
(SEPIA)
(SEPIA)
Take pictures in sepia.
R Film simulation options can be combined with tone and sharpness settings (P 71, 72).
62
Recording Pictures in RAW Format
Recording Pictures in RAW Format
To record raw, unprocessed data from the camera image sensor, select a RAW option for image qual-
ity in the shooting menu as described below. JPEG copies of RAW images can be created using the
j RAW CONVERSION option in the playback menu, or RAW images can be viewed on a computer us-
ing the RAW FILE CONVERTER application that is installed with the software on the supplied CD (P 95, 97).
1
Press MENU/OK in shooting mode to display the shooting menu. Press the selector up or down to
highlight T IMAGE QUALITY and press MENU/OK.
2
Highlight an option and press MENU/OK. Select RAW to record only RAW images, or FINE+RAW or
NORMAL+RAW to record both JPEG copy together with the RAW images. FINE+RAW uses lower
JPEG compression ratios for higher-quality JPEG images, while NORMAL+RAW uses higher JPEG
compression ratios to increase the number of images that can be stored.
The Fn Button
The Fn Button
To toggle RAW image quality on or o for a single shot, assign RAW to the Fn
button. If a JPEG option is currently selected for image quality, pressing the Fn
button temporarily selects the equivalent JPEG+RAW option. If a JPEG+RAW
option is currently selected, pressing the Fn button temporarily selects the
equivalent JPEG option, while if RAW is selected, pressing the Fn button tem-
porarily selects FINE. Taking a picture or pressing the Fn button again restores
the previous setting.
R Sensitivities of L (100), H (12800), and H (25600) are not available when RAW image quality is on (P 47).
63
More on Photography and Playback
Recording Pictures in RAW Format
Creating JPEG Copies of RAW Pictures
Creating JPEG Copies of RAW Pictures
RAW pictures store information on camera settings separately from the data captured by the camera
image sensor. Using the j RAW CONVERSION option in the playback menu, you can create JPEG
copies of RAW pictures using di erent options for the settings listed below. The original image data
are una ected, allowing a single RAW image to be processed in a multitude of di erent ways.
1
Press MENU/OK during playback to display the
playback menu, then press the selector up
or down to highlight j RAW CONVERSION
and press MENU/OK to display the settings list-
ed in the table at right.
R These options can also be displayed by pressing
Q button during playback.
2
Press the selector up or
down to highlight a setting
and press the selector right
to select. Press the selec-
tor up or down to highlight
the desired option and press MENU/OK to select
and return to the settings list. Repeat this step
to adjust additional settings.
3
Press the Q button to preview the JPEG copy
and press MENU/OK to save.
Setting
Setting
Description
Description
REFLECT SHOOTING
COND.
Create a JPEG copy using the settings in ef-
fect at the time the photo was taken.
PUSH/PULL
PROCESSING
Adjust exposure by –1 EV to +3 EV in incre-
ments of 
/
 EV (P 55).
DYNAMIC RANGE
Enhance details in highlights for natural
contrast (P 71).
FILM SIMULATION
Simulate the e ects of di erent types of  lm
(P 61).
WHITE BALANCE
Adjust white balance (P 45).
WB SHIFT
Fine-tune white balance (P 45).
COLOR
Adjust color density (P 71).
SHARPNESS
Sharpen or soften outlines (P 71).
HIGHLIGHT TONE
Adjust highlights (P 71).
SHADOW TONE
Adjust shadows (P 72).
NOISE REDUCTION
Process the copy to reduce mottling (P 72).
CREATE
REFLECT SHOOTING COND.
PUSH/PULL PROCESSING
DYNAMIC RANGE
FILM SIMULATION
WHITE BALANCE
WB SHIFT
RAW CONVERSION
CANCEL
64
The Fn Button
The Fn Button
The role played by the Fn button can be selected using the F FUNC-
TION (Fn) SETTING option in the shooting menu. The options available
include, depth-of- eld preview (P 42), sensitivity (P 47), the self-timer
(P 57), image size (P 70), image quality (P 71), dynamic range (P 71), lm
simulation (P 61), metering (P 56), focus/exposure lock (P 53), instant AF
(P 50), focus mode (P 49), Intelligent Face Detection (P 74), location info
search (P 92), movie mode (P 75), and RAW/JPEG toggle (P 62).
R The F Fn BUTTON SETTING menu can also be displayed by pressing and holding the Fn button.
65
More on Photography and Playback
Using a Mount Adapter
Using a Mount Adapter
When M-mount lenses are attached using an optional FUJIFILM M MOUNT ADAPTER, the camera processes
pictures as they are taken to maintain image quality and correct for a variety of e ects.
R Attaching a mount adapter enables m SHOOT WITHOUT LENS (P 73) and hides the distance indicator in the
standard display.
R To check focus, select p MANUAL for F FOCUS MODE in the shooting menu (P 49).
Mount Adapter Settings
Mount Adapter Settings
Pressing the function button
on the mount adapter displays
l MOUNT ADAPTOR SET-
TING options.
SET
LENS
1
LENS
2
LENS
3
LENS
4
LENS
5
LENS
6
21
mm
24
mm
28
mm
35
mm
50
mm
75
mm
MOUNT ADAPTOR SETTING
Choosing a Focal Length
If the lens has a focal length of
21, 24, 28, or 35 mm, choose
a matching option in the
l MOUNT ADAPTOR SET-
TING menu. For other lenses,
select option 5 or 6 to display the menu at right,
press the selector right to display focal length
settings, and use the selector to enter the focal
length.
Distortion Correction
Choose from STRONG, MEDI-
UM, or WEAK options to cor-
rect BARREL or PINCUSHION
distortion.
CANCEL
BARREL STRONG
BARREL MEDIUM
BARREL WEAK
OFF
PINCUSHION WEAK
PINCUSHION MEDIUM
LENS
5
DISTORTION CORRECTION
SET
Barrel distortion Pincushion distortion
R To determine the amount required, adjust distor-
tion correction while taking photos of graph paper
or other objects featuring repeating vertical and
horizontal lines, such as the windows in a high-rise.
0
2
1
9
8
50mm
LENS
5
CANCELSET
INPUT FOCAL LENGTH
66
Using a Mount Adapter
Color Shading Correction
Color (shading) variations be-
tween the center and edges
of the frame can be adjusted
separately for each corner.
SETNEXT
To use color shading correction, follow the steps
below.
1
Rotate the sub-command dial to
choose a corner. The selected cor-
ner is indicated by a triangle.
2
Use the selector to adjust shading
until there is no visible di erence in
color between the selected corner
and the center of the image. Press the selector
left or right to adjust colors on the cyan–red
axis, up or down to adjust colors on the blue–
yellow axis. There are a total of 19 positions
available on each axis.
R To determine the amount required, adjust color
shading correction while taking photos of blue sky
or a sheet of gray paper.
Peripheral Illumination Correction
Choose from values between
–5 and +5. Choosing positive
values increases peripheral il-
lumination, while choosing
negative values reduces pe-
ripheral illumination. Positive values are recom-
mended for vintage lenses, negative values to
create the e ect of images taken with an antique
lens or a pinhole camera.
R To determine the amount required, adjust periph-
eral illumination correction while taking photos of
blue sky or a sheet of gray paper.
0
CANCELSET
67
More on Photography and Playback
Image Search
Image Search
Follow the steps below to search for pictures.
1
Press MENU/OK during playback to display the playback menu. Press the selector up or down to highlight
b IMAGE SEARCH and press MENU/OK.
2 Highlight an option and press MENU/OK.
Option
Option
Description
Description
BY DATE Search by date.
BY FACE Search for pictures that include faces.
BY I FAVORITES Search by rating (P 23).
BY TYPE OF DATA Find all still pictures, all movies, or all RAW pictures.
BY UPLOAD MARK Find all pictures selected for upload to a speci ed destination.
3
Select a search condition. Only pictures that match the search condition will
be displayed. To delete or protect selected pictures or to view the selected
pictures in a slide show, press MENU/OK and choose from the options at right.
4 To end the search, select EXIT SEARCH.
Option
Option
See page
See page
A
A
ERASE
ERASE
77
77
D
D
PROTECT
PROTECT
78
78
I
I
SLIDE SHOW
SLIDE SHOW
79
79
68
PhotoBook Assist
PhotoBook Assist
Create books from your favorite photos.
Creating a PhotoBook
Creating a PhotoBook
1
Select NEW BOOK for m PHOTOBOOK AS-
SIST in the playback menu (P 80) and choose
from the following options:
SELECT FROM ALL: Choose from all available
pictures.
SELECT BY IMAGE SEARCH: Choose from pictures
matching selected search conditions (P
67).
R Neither photographs a or smaller nor movies
can be selected for photobooks.
2
Scroll through the images and press the se-
lector up to select or deselect. To display the
current image on the cover, press the selector
down. Press MENU/OK to exit when the book is
complete.
R The  rst picture selected becomes the cover im-
age. Press the selector down to select a di erent
image for the cover.
3
Highlight COMPLETE PHOTOBOOK and
press MENU/OK (to select all photos or all pho-
tos matching the speci ed search conditions
for the book, choose SELECT ALL). The new
book will be added to the list in the photo-
book assist menu.
Q Books can contain up to 300 pictures.
Q Books that contain no photos are automatically de-
leted.
69
More on Photography and Playback
PhotoBook Assist
Viewing Photobooks
Viewing Photobooks
Highlight a book in the photobook assist menu
and press MENU/OK to display the book, then press
the selector left or right to scroll through the pic-
tures.
Editing and Deleting Photobooks
Editing and Deleting Photobooks
Display the photobook and press MENU/OK. The
following options will be displayed; select the
desired option and follow the on-screen instruc-
tions.
EDIT: Edit the book as described in “Creating a
PhotoBook” (P 68).
ERASE: Delete the book.
Photobooks
Photobooks
Photobooks can be copied to a computer using the supplied MyFinePix Studio software (P 95).
70
Menus
Menus
Using the Menus: Shooting Mode
Using the Menus: Shooting Mode
The shooting menu is used to adjust settings for a wide range of shooting condi-
tions. To display the shooting menu, press MENU/OK in shooting mode. Highlight
items and press the selector right to view options, then highlight an option and
press MENU/OK. Press DISP/BACK to exit when settings are complete.
1
P
ISO
PROGRAM AE
SHOOTING MENU
IMAGE SIZE
IMAGE QUALITY
DYNAMIC RANGE
FILM SIMULATION
FILM SIMULATION BKT
EXIT
3
:
2
F
AUTO
Shooting Menu Options (Photographs)
Shooting Menu Options (Photographs)
A
A
SCENE POSITION
SCENE POSITION
Choose a scene for SP mode (P 38).
A
A
Adv. MODE
Adv. MODE
Choose an advanced shooting mode (P 35).
N
N
ISO
ISO
Control the cameras sensitivity to light (P 47).
O
O
IMAGE SIZE
IMAGE SIZE
Choose the size and aspect ratio at which still pictures are recorded.
Aspect Ratio
Aspect Ratio
Pictures with an aspect ratio of 3 : 2 have the same proportions as
Pictures with an aspect ratio of 3 : 2 have the same proportions as
a frame of 35 mm lm, while an aspect ratio of 16 : 9 is suited to
a frame of 35 mm  lm, while an aspect ratio of 16 : 9 is suited to
display on
display on
H
H
igh
igh
D
D
e nition (HD) devices. Pictures with an aspect
e nition (HD) devices. Pictures with an aspect
ratio of 1 : 1 are square.
ratio of 1 : 1 are square.
O IMAGE SIZE is not reset when the camera is turned o or an-
other shooting mode is selected.
Option
Option
Prints at sizes up to
Prints at sizes up to
Option
Option
Prints at sizes up to
Prints at sizes up to
O
O
3 : 2
3 : 2
41 × 28 cm (16 × 11 in.)
Q
Q
3 : 2
3 : 2
21 × 14 cm (8 × 5 in.)
O
O
16 : 9
16 : 9
41 × 23 cm (16 × 9 in.)
Q
Q
16 : 9
16 : 9
21 × 12 cm (8 × 4 in.)
O
O
1 : 1
1 : 1
28 × 28 cm (11 × 11 in.)
Q
Q
1 : 1
1 : 1
14 × 14 cm (5 × 5 in.)
P
P
3 : 2
3 : 2
29 × 20 cm (11 × 7 in.)
P
P
16 : 9
16 : 9
29 × 16 cm (11 × 6 in.)
P
P
1 : 1
1 : 1
20 × 20 cm (7 × 7 in.)
71
Menus
Using the Menus: Shooting Mode
T
T
IMAGE QUALITY
IMAGE QUALITY
Choose a  le format and compression ratio. Select FINE or NORMAL to record JPEG images, RAW to record RAW images, or
FINE+RAW or NORMAL+RAW to record both JPEG and RAW images. FINE and FINE+RAW use lower JPEG compression ratios
for higher-quality JPEG images, while NORMAL and NORMAL+RAW use higher JPEG compression ratios to increase the num-
ber of images that can be stored.
U
U
DYNAMIC RANGE
DYNAMIC RANGE
Control contrast. Choose lower values to increase contrast when shooting indoors or under overcast skies, higher values to
reduce loss of detail in highlights and shadows when photographing high-contrast scenes. Higher values are recommended
for scenes that include both sunlight and deep shade, for such high-contrast subjects as sunlight on water, brightly-lit autumn
leaves, and portraits taken against a blue sky, and for white objects or people wearing white; note, however, that mottling may
appear in pictures taken at higher values.
R If AUTO is selected, shutter speed and aperture will be displayed when the shutter button is pressed halfway.
R
R
W
W 200% is available at sensitivities of ISO 400 and above,
X
X 400% at sensitivities of ISO 800 and above.
P
P
FILM SIMULATION
FILM SIMULATION
Simulate the e ects of di erent types of  lm (P 61).
X
X
FILM SIMULATION BKT
FILM SIMULATION BKT
Choose  lm types for  lm simulation bracketing (P 60).
B
B
SELF-TIMER
SELF-TIMER
Take pictures with the self-timer (P 57).
f
f
COLOR
COLOR
Adjust color density.
q
q
SHARPNESS
SHARPNESS
Sharpen or soften outlines.
r
r
HIGHLIGHT TONE
HIGHLIGHT TONE
Adjust the appearance of highlights.
72
Using the Menus: Shooting Mode
s
s
SHADOW TONE
SHADOW TONE
Adjust the appearance of shadows.
h
h
NOISE REDUCTION
NOISE REDUCTION
Reduce noise in pictures taken at high sensitivities.
K
K
LONG EXPOSURE NR
LONG EXPOSURE NR
Select ON to reduce mottling in long time-exposures (P 41, 43).
K
K
CUSTOM SET
CUSTOM SET
Save settings for P, S, A, and M mode (P 44).
F
F
FUNCTION (Fn) SETTING
FUNCTION (Fn) SETTING
Choose the role played by the Fn button (P 64).
v
v
DISP. CUSTOM SETTING
DISP. CUSTOM SETTING
Choose the items displayed in the LCD monitor (P 19). The following items can be displayed: framing grid (you can also select the
grid type as described on page 73), focus distance (auto or manual), histogram, exposure (shutter speed, aperture, and sensitiv-
ity), exposure compensation/exposure indicator, metering,  ash mode, white balance,  lm simulation, dynamic range, number
of exposures remaining, image size and quality, and battery level. See pages 6 7 for the locations of these items in the displays.
Press the selector up or down to highlight items and press MENU/OK to select or deselect. Press DISP/BACK to exit when settings
are complete.
73
Menus
Using the Menus: Shooting Mode
c
c
FRAMING GUIDELINE
FRAMING GUIDELINE
Choose the type of framing grid available in shooting mode.
F
F
GRID 9
GRID 9
G
G
GRID 24
GRID 24
H
H
HD FRAMING
HD FRAMING
P P P
For “rule of thirds” composition. A six-by-four grid. Frame HD pictures in the crop shown by the
lines at the top and bottom of the display.
l
l
MOUNT ADAPTOR SETTING
MOUNT ADAPTOR SETTING
Adjust settings for M-mount lenses connected using an optional FUJIFILM M MOUNT ADAPTER (P 65).
m
m
SHOOT WITHOUT LENS
SHOOT WITHOUT LENS
Choose whether shutter release is enabled when no lens is attached.
L
L
IS MODE
IS MODE
Choose from the following image stabilization options:
Option
Option
Description
Description
L
L
CONTINUOUS + MOTION
CONTINUOUS + MOTION
Image stabilization on. If + MOTION is selected, the camera will adjust shutter speed to reduce
motion blur when a moving objects are detected.
l
l
CONTINUOUS
CONTINUOUS
M
M
SHOOTING + MOTION
SHOOTING + MOTION
As above, except that image stabilization is performed only when the shutter button is pressed
halfway or the shutter is released.
m
m
SHOOTING ONLY
SHOOTING ONLY
OFF
OFF Image stabilization o . Choose this option when using a tripod.
R + MOTION has no e ect when sensitivity is set to a  xed value, and may also be unavailable at some other combinations of
settings. The e ect may vary with lighting conditions and the speed at which the object is moving.
R IS mode is available only when lens that supports image stabilization is attached.
74
Using the Menus: Shooting Mode
C
C
PHOTOMETRY
PHOTOMETRY
Choose how the camera meters exposure when Intelligent Face Detection is o (P 56).
b
b
FACE DETECTION
FACE DETECTION
Intelligent Face Detection sets focus and exposure for human faces anywhere in the frame, preventing the camera from focusing
on the background in group portraits. Choose for shots that emphasize portrait subjects.
To use Intelligent Face Detection, press MENU/OK to display the shooting menu and select ON for b FACE
DETECTION. Faces can be detected with the camera in vertical or horizontal orientation; if a face is de-
tected, it will be indicated by a green border. If there is more than one face in the frame, the camera will
select the face closest to the center; other faces are indicated by white borders.
Q In some modes, the camera may set exposure for the frame as a whole rather than the portrait subject.
Q If the subject moves as the shutter button is pressed, their face may not be in the area indicated by
the green border when the picture is taken.
P
F
F
FOCUS MODE
FOCUS MODE
This option controls how the camera focuses (P 49).
c
c
MF ASSIST
MF ASSIST
Choose how focus is displayed in manual focus mode (P 50).
Option
Option
Description
Description
STANDARD Focus is displayed normally (focus peaking is not available).
FOCUS PEAK HIGHLIGHT The camera heightens high-contrast outlines. Choose from LOW and HIGH.
75
Menus
Using the Menus: Shooting Mode
C
C
AF ILLUMINATOR
AF ILLUMINATOR
If ON is selected, the AF-assist illuminator will light to assist autofocus.
R The AF-assist illuminator turns o automatically in silent mode.
Q The camera may be unable to focus using the AF-assist illuminator in some cases. If the camera is unable to focus in macro
mode, try increasing the distance to the subject.
Q Avoid shining the AF-assist illuminator directly into your subject’s eyes.
v
v
AE/AF-LOCK BUTTON
AE/AF-LOCK BUTTON
When AE/AF LOCK is assigned to the Fn button, this option can be used to choose whether the button locks focus, exposure,
or both (P 53).
W
W
MOVIE SET-UP
MOVIE SET-UP
Adjust movie settings.
Option
Option
Description
Description
MOVIE MODE
MOVIE MODE
Choose a frame size for movies.
Option
Option
Description
Description
i 1920 × 1080 30 fps
Full HD (High De nition).
h 1280 × 720 30 fps
High De nition.
FOCUS MODE
FOCUS MODE
This option controls how the camera focuses during movie recording.
r CENTER: When shooting starts, the camera focuses on the subject in the center of the frame.
u CONTINUOUS: The camera continuously adjusts focus to re ect changes in the distance to subjects near
the center of the frame.
p MANUAL: Focus manually.
R Note that in u mode, the camera focuses continuously, increasing the drain on the battery, and that the
sound of the camera focusing may be audible.
R If a face is detected when u is selected, a o icon will be displayed and the camera will continuously
adjust focus to maintain focus on the face.
76
Using the Menus: Shooting Mode
p
p
FLASH MODE
FLASH MODE
Choose a  ash mode (
P 27).
I
I
FLASH COMPENSATION
FLASH COMPENSATION
Adjust  ash brightness. Choose from values between +2 EV and –2 EV. Note that the desired results may not be achieved de-
pending on shooting conditions and the distance to the subject.
B
B
RED EYE REMOVAL
RED EYE REMOVAL
Choose ON to remove red-eye e ects caused by the  ash.
R Red-eye reduction is performed only when a face is detected.
R Red-eye removal is not available with RAW images.
n
n
SAVE ORG IMAGE
SAVE ORG IMAGE
Choose ON to save unprocessed copies of pictures taken using B RED EYE REMOVAL.
77
Menus
Using the Menus: Playback Mode
Using the Menus: Playback Mode
To display the playback menu, press MENU/OK in playback mode. Highlight items
and press the selector right to view options, then highlight an option and press
MENU/OK. Press DISP/BACK to exit when settings are complete.
1
PLAYBACK MENU
EXIT
ERASE
CROP
RESIZE
PROTECT
IMAGE ROTATE
RED EYE REMOVAL
SLIDE SHOW
Playback Menu Options
Playback Menu Options
A
A
ERASE
ERASE
Delete all or selected pictures.
FRAME: Press the selector left or right to scroll through pictures and press MENU/OK to delete the current picture (a con rmation
dialog is not displayed).
SELECTED FRAMES: Highlight pictures and press MENU/OK to select or deselect. When the operation is complete, press DISP/BACK
to display a con rmation dialog, then highlight OK and press MENU/OK.
ALL FRAMES: A con rmation dialog will be displayed; highlight OK and press MENU/OK to delete all unprotected pictures.
G
G
CROP
CROP
Create a cropped copy of the current picture.
1
Display the desired picture.
2
Select G CROP in the playback menu.
3
Use the sub-command dial to zoom in and out and press the selector up, down, left, or right to scroll the picture until the
desired portion is displayed.
4
Press MENU/OK to display a con rmation dialog.
5
Press MENU/OK again to save the cropped copy to a separate  le.
R Larger crops produce larger copies; all copies have an aspect ratio of 3 : 2. If the size of the  nal copy will be a, OK will be
displayed in yellow.
78
Using the Menus: Playback Mode
e
e
RESIZE
RESIZE
Create a cropped copy of the current picture.
1
Display the desired picture.
2
Select e RESIZE in the playback menu.
3
Highlight a size and press MENU/OK to display a con rmation dialog.
4
Press MENU/OK again to save the resized copy to a separate  le.
R The sizes available vary with the size of the original image.
D
D
PROTECT
PROTECT
Protect pictures from accidental deletion. Highlight one of the following options and press MENU/OK.
FRAME: Protect selected pictures. Press the selector left or right to view pictures and press MENU/OK to select or deselect. Press
DISP/BACK when the operation is complete.
SET ALL: Protect all pictures.
RESET ALL: Remove protection from all pictures.
Q Protected pictures will be deleted when the memory card is formatted (P 87).
C
C
IMAGE ROTATE
IMAGE ROTATE
Rotate pictures.
1
Display the desired picture.
2
Select C IMAGE ROTATE in the playback menu.
3
Press the selector down to rotate the picture 90° clockwise, up to rotate it 90° counterclockwise.
4
Press MENU/OK. The picture automatically be displayed in the selected orientation whenever it is played back on the camera.
R Protected pictures can not be rotated. Remove protection before rotating pictures.
R The camera may not be able to rotate pictures created with other devices. Pictures rotated on the camera will not be rotated
when viewed on a computer or on other cameras.
R Pictures taken with A SCREEN SET-UP > AUTOROTATE PB are automatically displayed in the correct orientation during
playback (P 84).
79
Menus
Using the Menus: Playback Mode
B
B
RED EYE REMOVAL
RED EYE REMOVAL
Remove red-eye from portraits. The camera will analyze the image; if red-eye is detected, the image will be processed to create
a copy with reduced red-eye.
1
Display the desired picture.
2
Select B RED EYE REMOVAL in the playback menu.
3
Press MENU/OK.
R Red eye may not be removed if the camera is unable to detect a face or the face is in pro le. Results may di er depending on
the scene. Red eye can not be removed from pictures that have already been processed using red-eye removal or pictures
created with other devices.
R The amount of time needed to process the image varies with the number of faces detected.
R Copies created with B RED EYE REMOVAL are indicated by a e icon during playback.
R Red eye removal can not be performed on RAW images.
I
I
SLIDE SHOW
SLIDE SHOW
View pictures in an automated slide show. Choose the type of show and press MENU/OK to start. Press DISP/BACK at any time dur-
ing the show to view on-screen help. The show can be ended at any time by pressing MENU/OK.
Option
Option
Description
Description
NORMAL
NORMAL
Press the selector left or right to go back or skip ahead one frame. Select FADE-IN for fade transitions between
frames.
FADE-IN
FADE-IN
NORMAL
NORMAL
g
g
As above, except that camera automatically zooms in on faces.
FADE-IN
FADE-IN
g
g
MULTIPLE
MULTIPLE Display several pictures at once.
R The camera will not turn o automatically while a slide show is in progress.
80
Using the Menus: Playback Mode
m
m
PHOTOBOOK ASSIST
PHOTOBOOK ASSIST
Create books from your favorite photos (P 68).
j
j
MARK FOR UPLOAD TO
MARK FOR UPLOAD TO
Select pictures for upload to YouTube, Facebook or MyFinePix.com using MyFinePix Studio (Windows only).
1
Select YouTube to choose movies for upload to YouTube, FACEBOOK to choose photos and movies for upload to Facebook,
or MyFinePix.com to choose photos for upload to MyFinePix.com.
2
Press the selector left or right to display pictures and press MENU/OK to select or deselect. Press DISP/BACK to exit when all the
desired pictures are selected.
R Only movies can be selected for upload to YouTube.
R Only photos can be selected for upload to MyFinePix.com.
R During playback, selected pictures are indicated by j YouTube, j FACEBOOK or j MyFinepix.com icons.
R Choose RESET ALL to deselect all pictures. If the number of pictures a ected is very large, some time may be required to
complete the operation. Press DISP/BACK to exit before the operation is complete.
Uploading Pictures (Windows Only)
Uploading Pictures (Windows Only)
Selected pictures can be uploaded using the
Selected pictures can be uploaded using the
YouTube/Facebook/
YouTube/Facebook/
MyFinePix.com Upload
MyFinePix.com Upload
option in MyFinePix Studio. For information on
option in MyFinePix Studio. For information on
installing MyFinePix Studio and connecting the camera to a computer, see
installing MyFinePix Studio and connecting the camera to a computer, see
Viewing Pictures on a Computer (
Viewing Pictures on a Computer (
P
P
95
).
).
Select with camera
Upload from computer
b
b
IMAGE SEARCH
IMAGE SEARCH
Search for pictures (P 67).
81
Menus
Using the Menus: Playback Mode
K
K
PRINT ORDER (DPOF)
PRINT ORDER (DPOF)
Select pictures for printing on DPOF- and PictBridge-compatible devices (P 102).
J
J
DISP ASPECT
DISP ASPECT
Choose how High De nition (HD) devices display pictures with an aspect ratio of 3 : 2
(this option is available only when an HDMI cable is connected). Select 16 : 9 to display
the image so that it  lls the screen with its top and bottom cropped out, 3 : 2 to display
the entire image with black bands at either side.
3:2
16:9
16 : 9
16 : 9
3 : 2
3 : 2
r
r
WIRELESS TRANSFER
WIRELESS TRANSFER
Connect via a wireless network to upload pictures to smartphones or tablets or to remotely browse the pictures on the camera
and select images for download (P 90).
s
s
PC AUTO SAVE
PC AUTO SAVE
Upload pictures to a computer over a wireless network (P 94).
j
j
RAW CONVERSION
RAW CONVERSION
Create JPEG copies of RAW pictures (P 63).
82
The Setup Menu
The Setup Menu
Using the Setup Menu
Using the Setup Menu
1
Display the setup menu.
1.1 Press MENU/OK to display the menu for the current mode.
1.2 Press the selector left to highlight the tab for the current menu.
1.3 Press the selector down to highlight the tab containing the desired option.
1
DATE/TIME
SET-UP
TIME DIFFERENCE
RESET
SILENT MODE
SOUND SET-UP
SCREEN SET-UP
EXIT
OFF
ENGLISH
1
Tab
1.4 Press the selector right to place the cursor in the setup menu.
2
Adjust settings.
Highlight items and press the selector right to view options, then highlight an option and press
MENU/OK. Press DISP/BACK to exit when settings are complete.
83
Menus
The Setup Menu
Setup Menu Options
Setup Menu Options
F
F
DATE/TIME
DATE/TIME
Set the camera clock (P 18).
N
N
TIME DIFFERENCE
TIME DIFFERENCE
Switch the camera clock instantly from your home time zone to the local time at your destination when traveling. To specify the
di erence between local time and your home time zone:
1
Highlight g LOCAL and press MENU/OK.
2
Use the selector to choose the time di erence between local time and your home time zone. Press MENU/OK when settings
are complete.
To set the camera clock to local time, highlight g LOCAL and press MENU/OK. To set the clock to the time in your home time
zone, select h HOME. If g LOCAL is selected, g will be displayed for three seconds when the camera is turned on.
Q
Q
a
a
Choose a language (P 18).
R
R
RESET
RESET
Reset shooting or setup menu options to default values. F DATE/TIME, N TIME DIFFERENCE and A SCREEN SET-UP >
BACKGROUND COLOR are not a ected.
1
Highlight the desired option and press the selector right.
2
A con rmation dialog will be displayed; highlight OK and press MENU/OK.
o
o
SILENT MODE
SILENT MODE
Select ON to disable the speaker,  ash, and illuminator in situations in which camera sounds or lights may be unwelcome (note
that silent mode can not be enabled or disabled during movie playback). Silent mode can also be turned on or o using the
DISP/BACK button as described on page 4.
84
The Setup Menu
b
b
SOUND SET-UP
SOUND SET-UP
Adjust sound settings.
Option
Option
Description
Description
OPERATION VOL.
OPERATION VOL.
Adjust the volume of the sounds produced when camera controls are operated. Choose e OFF
(mute) to disable control sounds.
PLAYBACK VOLUME
PLAYBACK VOLUME Adjust the volume for movie playback.
A
A
SCREEN SET-UP
SCREEN SET-UP
Adjust display settings.
Option
Option
Description
Description
IMAGE DISP.
IMAGE DISP.
Choose how long images are displayed after shooting. Colors may di er slightly from those in the  nal
image and “noise mottling may be visible at high sensitivities.
Option
Option
Description
Description
CONTINUOUS
CONTINUOUS
Pictures are displayed until the MENU/OK button is pressed or the shutter button
is pressed halfway. To zoom in on the active focus point, press the center of the
sub-command dial; press again to cancel zoom.
1.5 SEC
1.5 SEC
Pictures are displayed for 1.5 seconds (1.5 SEC) or 0.5 seconds (0.5 SEC) or until
the shutter button is pressed halfway.
0.5 SEC
0.5 SEC
OFF
OFF Pictures are not displayed after shooting.
LCD BRIGHTNESS
LCD BRIGHTNESS Control the brightness of the display.
MONITOR SUNLIGHT MODE
MONITOR SUNLIGHT MODE
Select ON to make the display in the monitor easier to read in bright light (P 4).
AUTOROTATE PB
AUTOROTATE PB Choose ON to automatically rotate “tall” (portrait-orientation) pictures during playback.
BACKGROUND COLOR
BACKGROUND COLOR Choose a color scheme.
85
Menus
The Setup Menu
I
I
FOCUS RING
FOCUS RING
Choose the direction in which the focus ring is rotated to increase the focus distance.
Z
Z
POWER MANAGEMENT
POWER MANAGEMENT
Adjust power management settings.
Option
Option
Description
Description
AUTO POWER OFF
AUTO POWER OFF
Choose the length of time before the camera turns o automatically when no operations are performed.
Shorter times increase battery life; if OFF is selected, the camera must be turned o manually. Note that in
some situations the camera turns o automatically even when OFF is selected.
QUICK START MODE
QUICK START MODE
Select ON to reduce the time needed to restart the camera after it has been turned o (P 17).
B
B
FRAME NO.
FRAME NO.
New pictures are stored in image  les named using a four-digit  le number assigned by adding one to the
last  le number used. The  le number is displayed during playback as shown at right. B FRAME NO. con-
trols whether  le numbering is reset to 0001 when a new memory card is inserted or the current memory
card is formatted.
Frame number
100-0001
Directory
number
File
number
Option
Option
Description
Description
CONTINUOUS
CONTINUOUS
Numbering continues from the last  le number used or the  rst available  le number, whichever is higher.
Choose this option to reduce the number of pictures with duplicate  le names.
RENEW
RENEW Numbering is reset to 0001 after formatting or when a new memory card is inserted.
R If the frame number reaches 999-9999, the shutter release will be disabled (P 119).
R Selecting R RESET (P 83) sets B FRAME NO. to CONTINUOUS but does not reset the  le number.
R Frame numbers for pictures taken with other cameras may di er.
86
The Setup Menu
U
U
DATE STAMP
DATE STAMP
Stamp the time and/or date of recording on photographs as they are taken.
R+S: Stamp new photographs with the date and time of recording.
R: Stamp new photographs with the date of recording.
OFF: Do not stamp the time and date on new photographs.
Q Time and date stamps can not be deleted. Turn DATE STAMP o to prevent time and date stamps appearing on new pho-
tographs.
Q If the camera clock is not set, you will be prompted to set the clock to the current date and time (P 18).
Q We recommend that you turn the DPOF “print date option o when printing images with a time and date stamp (P 101).
Q Time and date stamps do not appear on movies and RAW images.
V
V
SENSOR CLEANING
SENSOR CLEANING
Remove dust from the camera image sensor.
OK: Clean sensor immediately (P xi).
WHEN SWITCHED ON: If this option is selected, sensor cleaning will be performed when the camera turns on.
WHEN SWITCHED OFF: If this option is selected, sensor cleaning will be performed when the camera turns o (sensor cleaning is
not however performed if the camera turns o in playback mode).
R Dust that can not be removed using sensor cleaning can be removed manually (
P 111).
M
M
FOCUS SCALE UNITS
FOCUS SCALE UNITS
Choose the units used for the focus distance indicator (
P 50).
S
S
CUSTOM RESET
CUSTOM RESET
Reset all settings for mode C. A con rmation dialog will be displayed, press the selector up or down to highlight OK and press
MENU/OK.
87
Menus
The Setup Menu
U
U
GEOTAGGING SET-UP
GEOTAGGING SET-UP
Access the following location data options (P 92).
Option
Option
Description
Description
r
r
LOCATION INFO SEARCH
LOCATION INFO SEARCH
Download location data from a smartphone.
GEOTAGGING
GEOTAGGING Choose whether to save location data with pictures.
LOCATION INFO
LOCATION INFO Display locatin data.
r
r
WIRELESS SETTINGS
WIRELESS SETTINGS
Adjust settings for connection to a wireless network.
Option
Option
Description
Description
GENERAL SETTINGS
GENERAL SETTINGS
Choose NAME a name to identify the camera on the wireless network (the camera is assigned a
unique name by default) or select RESET WIRELESS SETTINGS to restore default settings.
RESIZE IMAGE FOR
RESIZE IMAGE FOR
SMARTPHONE
SMARTPHONE
H
H
Choose ON (the default setting, recommended in most circumstances) to resize larger images to H
for upload to smartphones, OFF to upload images at their original size. Resizing applies only to the
copy uploaded to the smartphone; the original is not a ected.
PC AUTO SAVE SETTINGS
PC AUTO SAVE SETTINGS
Choose DELETE REGISTERED DESTINATION PC to remove selected destinations, DETAILS OF PRE-
VIOUS CONNECTION to view computers to which the camera has recently connected.
s
s
PC AUTO SAVE SETTING
PC AUTO SAVE SETTING
Choose a destination for images uploaded using s PC AUTO SAVE. For more information, visit http://app.fujifilm-dsc.com/pc.
K
K
FORMAT
FORMAT
Select OK to format the memory card.
Q All data—including protected pictures—will be deleted from the memory card. Be sure important  les have been copied to
a computer or other storage device.
Q Do not open the battery-chamber cover during formatting.
88
Factory Defaults
Factory Defaults
The factory default settings for the options in the shooting and setup menus are listed below. With
the exceptions of F DATE/TIME, N TIME DIFFERENCE and A SCREEN SET-UP > BACKGROUND
COLOR, these settings can be restored using the R RESET option in the setup menu.
Shooting Menu
Menu
Menu
Default
Default
A SCENE POSITION Z PORTRAIT ENHANCER
A Adv. MODE G ADVANCED FILTER
N ISO AUTO (in S mode)
O IMAGE SIZE O 3 : 2
T IMAGE QUALITY
FINE
U DYNAMIC RANGE
AUTO
P FILM SIMULATION c PROVIA/STANDARD
X FILM SIMULATION BKT
FILM 1
c PROVIA/STANDARD
FILM 2
d Velvia/VIVID
FILM 3
e ASTIA/SOFT
B SELF-TIMER
OFF
f COLOR
(0) MID
q SHARPNESS
(0) STANDARD
r HIGHLIGHT TONE
(0) STANDARD
s SHADOW TONE
(0) STANDARD
h NOISE REDUCTION
(0) STANDARD
K LONG EXPOSURE NR
ON
K CUSTOM SET
F FUNCTION (Fn) SETTING N ISO
v DISP. CUSTOM SETTING
All selected items
Menu
Menu
Default
Default
c FRAMING GUIDELINE F GRID 9
l MOUNT ADAPTOR SETTING
LENS 5 (50mm)
m SHOOT WITHOUT LENS
OFF
L IS MODE
L CONTINUOUS +
MOTION
C PHOTOMETRY o MULTI
b FACE DETECTION
OFF
F FOCUS MODE t AREA
c MF ASSIST
FOCUS PEAK HIGHLIGHT
(HIGH)
C AF ILLUMINATOR
ON
v AE/AF-LOCK BUTTON
AE LOCK ONLY
W MOVIE SET-UP
MOVIE MODE
i 1920 × 1080 30 fps
FOCUS MODE
u CONTINUOUS
p FLASH MODE
AUTO
I FLASH COMPENSATION
±0
B RED EYE REMOVAL
ON
n SAVE ORG IMAGE
OFF
WHITE BALANCE AUTO
89
Menus
Factory Defaults
Setup Menu
Menu
Menu
Default
Default
F DATE/TIME
N TIME DIFFERENCE
Q a
R RESET
o SILENT MODE
OFF
b SOUND SET-UP
OPERATION VOL.
c
PLAYBACK VOLUME 7
A SCREEN SET-UP
IMAGE DISP. OFF
LCD BRIGHTNESS 0
MONITOR SUNLIGHT MODE OFF
AUTOROTATE PB ON
BACKGROUND COLOR
I FOCUS RING X CW
Z POWER MANAGEMENT
AUTO POWER OFF 2 MIN
QUICK START MODE OFF
B FRAME NO.
CONTINUOUS
U DATE STAMP
OFF
V SENSOR CLEANING
OK
WHEN SWITCHED ON OFF
WHEN SWITCHED OFF ON
M FOCUS SCALE UNITS
METERS
S CUSTOM RESET
Menu
Menu
Default
Default
U GEOTAGGING SET-UP
r LOCATION INFO SEARCH
GEOTAGGING OFF
LOCATION INFO ON
r WIRELESS SETTINGS
GENERAL SETTINGS
RESIZE IMAGE FOR
SMARTPHONE
H
H
ON
PC AUTO SAVE SETTINGS
s PC AUTO SAVE SETTING
K FORMAT
90
Connections
Connections
Uploading Pictures
Uploading Pictures
Connect via a wireless network to upload pictures to smartphones or tablets or to remotely browse
the pictures on the camera and select images for download. Before proceeding, download the free
FUJIFILM Camera Application app and install it on your smartphone or tablet. To download the app or
view information on using FUJIFILM Camera Application, visit http://app.fujifilm-dsc.com/app.
To upload pictures or view pictures remotely:
1
Press MENU/OK during playback to display the playback menu.
2
Select r WIRELESS TRANSFER.
R The r WIRELESS TRANSFER menu can also be displayed by pressing the Fn (Wi-Fi)
button.
SEND INDIVIDUAL IMAGE
SEND SELECTED MULTIPLE IMAGES
VIEW & OBTAIN IMAGES ON
r
WIRELESS TRANSFER
3
Choose from the following options:
Option
Option
Description
Description
VIEW & OBTAIN IMAGES
VIEW & OBTAIN IMAGES
ON
ON
r
r
Use the smartphone to view the photos and movies on the camera and
select pictures for download.
SEND INDIVIDUAL IMAGE
SEND INDIVIDUAL IMAGE Upload the current picture to the smartphone.
SEND SELECTED MULTIPLE
SEND SELECTED MULTIPLE
IMAGES
IMAGES
Upload selected pictures to the smartphone.
R Pictures can also be uploaded to devices running the FUJIFILM Photo Receiver app.
R Be sure that the battery is charged before beginning upload. Do not remove the battery, turn the camera o ,
or remove the memory card until upload is complete.
R If you are unable to upload still pictures, check the smartphone’s settings.
91
Connections
Uploading Pictures
R Personal information may be revealed by the titles, dates, location data, and other information included with
pictures. Verify the destination before beginning upload.
R The time needed for upload varies with  le size and the distance to the destination. At default settings (rec-
ommended), ON is selected for r WIRELESS SETTING> RESIZE IMAGE FOR SMARTPHONE H (P 87) and
images are resized to H for upload.
R RAW images can not be uploaded. The camera may be unable to upload images created or modi ed on other
devices.
R Movies can not be uploaded using the SEND INDIVIDUAL IMAGE and SEND SELECTED MULTIPLE IMAGES
options.
R Upload may not succeed depending on signal quality.
R The camera will end the connection to the smartphone automatically if no operations are performed for a set
period.
92
Location Data
Location Data
The U GEOTAGGING SET-UP> r LOCATION INFO SEARCH option in the setup menu can be used
to download location data from smartphones running the free FUJIFILM Camera Application app. The
location data can then be added to pictures as they are taken. To download the app or view informa-
tion on using FUJIFILM Camera Application, visit http://app.fujifilm-dsc.com/app.
Downloading Location Data
Downloading Location Data
To download data for your current location from a smartphone:
1
Press MENU/OK to display the menu for the current mode.
2
Press the selector left to highlight the tab for the current menu.
3
Press the selector down to highlight the tab containing the desired option.
1
DATE/TIME
SET-UP
TIME DIFFERENCE
RESET
SILENT MODE
SOUND SET-UP
SCREEN SET-UP
EXIT
OFF
ENGLISH
1
Tab
4
Press the selector right to place the cursor in the menu.
5
Select U GEOTAGGING SET-UP> r LOCATION INFO SEARCH. Note that the accuracy of data
will vary from device to device.
93
Connections
Location Data
Recording Location Data with Pictures
Recording Location Data with Pictures
To save location data with new pictures:
1
Download data on your current location from a smartphone (P 92).
2
Select ON for U GEOTAGGING SET-UP> GEOTAGGING.
3
Take pictures. The location data acquired in Step 2 will be added to the new images.
The camera will display the latitude and longitude of the most recently acquired lo-
cation. In addition, a i icon will be displayed if location data have been updated
in the last two hours; if the time elapsed since the last update is more than two
hours, the i icon will  ash. A j icon indicates that no location data are available.
R To disable geotagging, select OFF for U GEOTAGGING SET-UP> GEOTAGGING. To choose whether the
camera displays the current location, use U GEOTAGGING SET-UP> LOCATION INFO.
Q The camera uses the most recently downloaded data; if you have changed your location since you last took
a picture, download data for the current location before shooting. Note that the camera automatically stops
recording location data three hours after the last update.
Viewing Location Data
During playback, pictures for which location data exist are indicated by a k icon.
Location data are shown for a few seconds each time the picture is displayed.
k icon
100-0001
100-0001
N
35° 66’ 55”
E
139° 73’ 04”
N
35° 66’ 55”
E
139° 73’ 04”
P
94
Saving Pictures to a Computer
Saving Pictures to a Computer
Follow the steps below to save pictures to a computer over a wireless network. Before proceeding,
install the free FUJIFILM PC AutoSave application to the destination computer and adjust settings as
desired. Be sure the camera battery is fully charged.
R Visit the following website for information on downloading FUJIFILM PC AutoSave and adjusting settings:
http://app.fujifilm-dsc.com/pc/.
1
During playback, press MENU/OK to display the playback menu.
2
Select s PC AUTO SAVE.
R A s PC AUTO SAVE option is also available in the r WIRELESS TRANSFER menu,
which can be displayed by pressing the Fn (Wi-Fi) button.
3
The options shown at right will be displayed; select a destination.
R The destination can also be selected using s PC AUTO SAVE SETTING.
PC-
01
PC-
02
PC-
03
PC-
04
PC-
05
MY-PC
SELECT DESTINATION PC
4
Follow the on-screen instructions.
R Do not turn the camera o or remove the camera battery or memory card while transfer is in progress.
R The camera will turn o automatically shortly after upload is completed.
95
Connections
Viewing Pictures on a Computer
Viewing Pictures on a Computer
The supplied software can be used to copy pictures to a computer, where they can be stored, viewed,
organized, and printed. Before proceeding, install the software as described below. Do NOT connect
the camera to the computer until installation is complete.
Windows: Installing MyFinePix Studio
Windows: Installing MyFinePix Studio
1
Con rm that the computer meets the following system requirements:
Windows 8/Windows 7 (Service Pack 1) /
Windows 8/Windows 7 (Service Pack 1) /
Windows Vista (Service Pack 2)
Windows Vista (Service Pack 2)
1
1
Windows XP (Service Pack 3)
Windows XP (Service Pack 3)
1
1
CPU
CPU
3 GHz Pentium 4 or better
3 GHz Pentium 4 or better
(2.4
(2.4
GHz Core 2 Duo or better
GHz Core 2 Duo or better
2
2
)
)
2 GHz Pentium 4 or better
2 GHz Pentium 4 or better
(2.4
(2.4
GHz Core 2 Duo or better
GHz Core 2 Duo or better
2
2
)
)
RAM
RAM
1 GB or more
1 GB or more
512 MB or more (1
512 MB or more (1
GB or more
GB or more
2
2
)
)
Free disk space
Free disk space
2 GB or more
2 GB or more
GPU
GPU
Supports DirectX 9 or later (recommended)
Supports DirectX 9 or later (recommended)
Supports DirectX 7 or later (required; performance
Supports DirectX 7 or later (required; performance
not guaranteed with other GPUs)
not guaranteed with other GPUs)
Video
Video 1024 × 768 pixels or more with 24-bit color or better
Other
Other
Built-in USB port recommended. Operation is not guaranteed with other USB ports.
.NET Framework 3.5 Service Pack 1 required when uploading images or using Map Viewer.
Internet connection (broadband recommended) required to install .NET Framework (if necessary), to use
auto update feature, and when performing such tasks as sharing pictures on-line or via e-mail.
1 Other versions of Windows are not supported. Only pre-installed operating systems are supported; operation is not guar-
anteed on home-built computers or computers that have been upgraded from earlier versions of Windows.
2 Recommended when displaying HD movies.
2
Start the computer. Log in to an account with administrator privileges before proceeding.
96
Viewing Pictures on a Computer
3
Exit any applications that may be running and insert the installer CD in a CD-ROM drive.
Windows 8/Windows 7/Windows Vista
Windows 8/Windows 7/Windows Vista
If an AutoPlay dialog is displayed, click SETUP.EXE. A “User Account Control” dialog will then be displayed;
click Ye s (Windows 8/Windows 7) or Allow (Windows Vista).
The installer will start automatically; click Install MyFinePix Studio and follow the on-screen in-
structions to install MyFinePix Studio and RAW FILE CONVERTER.
If the Installer Does Not Start Automatically
If the Installer Does Not Start Automatically
If the installer does not start automatically, follow the steps below.
Windows 8: Select Desktop from the Start screen, then select File Explorer on the desktop taskbar and
choose Computer in the navigation panel. Double-click the drive containing the installer CD and follow
the on-screen instructions.
Other versions of Windows: Select Computer or My Computer from the Start menu, then double-click
the FINEPIX CD icon to open the FINEPIX CD window and double-click setup or SETUP.EXE.
4
If prompted to install Windows Media Player or DirectX, follow the on-screen instructions to com-
plete installation.
5
Remove the installer CD from the CD-ROM drive when installation is complete. Store the installer
CD in a dry location out of direct sunlight in case you need to re-install the software.
Installation is now complete. Proceed to “Connecting the Camera (P 98).
97
Connections
Viewing Pictures on a Computer
Macintosh: Installing RAW FILE CONVERTER
Macintosh: Installing RAW FILE CONVERTER
RAW FILE CONVERTER is used to view RAW images on your computer.
1
Con rm that the computer meets the following system requirements:
CPU
CPU Intel (Core 2 Duo or better)
OS
OS
Pre-installed copies of Mac OS X version 10.6–10.8 (visit http://www.fujifilm.com/support/digital_cameras/
compatibility/ for more information).
RAM
RAM 1 GB or more
Free disk space
Free disk space A minimum of 200 MB required for installation with 400 MB available when RAW FILE CONVERTER is running
Video
Video 1,024 × 768 pixels or more with 24-bit color or better
2
After starting the computer and quitting any applications that may be running, insert the installer
CD in a CD-ROM drive and double-click SILKYRFCEXInstaller.
3
Enter an administrator name and password when prompted and click OK, then follow the on-
screen instructions to install. Click Exit to quit the installer when installation is complete.
4
Remove the installer CD from the CD-ROM drive. Note that you may be unable to remove the CD
if Safari is running; if necessary, quit Safari before removing the CD. Store the installer CD in a dry
location out of direct sunlight in case you need to re-install the software.
Installation is now complete. Proceed to “Connecting the Camera (P 98).
Macintosh: Importing Pictures
Macintosh: Importing Pictures
Still images and movies can be imported using Image Capture or other standard Mac OS applications.
98
Viewing Pictures on a Computer
Connecting the Camera
Connecting the Camera
1
Find a memory card containing pictures you want to copy to the computer and insert the card into
the camera (P 13).
R Windows users may require the Windows CD when starting the software for the  rst time.
Q Loss of power during transfer could result in loss of data or damage to the memory card. Insert a fresh or
fully-charged battery before connecting the camera.
2
Turn the camera o and connect a USB cable (available sepa-
rately from third-party suppliers) as shown, making sure the
connectors are fully inserted. Connect the camera directly to
the computer; do not use a USB hub or keyboard.
Q The USB cable must be no more than 1.5 m (4.9 ft.) long and be suitable for data transfer.
3
Turn the camera on.
4
Upload pictures in MyFinePix Studio and
follow the on-screen instructions to copy pictures to the
computer. To exit without copying pictures, click Cancel.
For more information on using the supplied software, start the application and select the appropriate
option from the Help menu.
99
Connections
Viewing Pictures on a Computer
Q If a memory card containing a large number of images is inserted, there may be a delay before the software
starts and you may be unable to import or save images. Use a memory card reader to transfer pictures.
Q Make sure that the computer does not display a message stating that copying is in progress and that the indi-
cator lamp is out before turning the camera o or disconnecting the USB cable (if the number of images cop-
ied is very large, the indicator lamp may remain lit after the message has cleared from the computer display).
Failure to observe this precaution could result in loss of data or damage to the memory card.
Q Disconnect the camera before inserting or removing memory cards.
Q In some cases, it may not be possible to access pictures saved to a network server using the supplied software
in the same way as on a standalone computer.
Q The user bears all applicable fees charged by the phone company or Internet service provider when using
services that require an Internet connection.
Disconnecting the Camera
Disconnecting the Camera
After con rming that the indicator lamp is out, turn the camera o and disconnect the USB cable.
Uninstalling the Supplied Software
Uninstalling the Supplied Software
Only uninstall the supplied software when it is no longer required or before beginning reinstallation. After
quitting the software and disconnecting the camera, drag “RAW FILE CONVERTER EX powered by SILKYPIX” from
Applications” into the Trash and select Empty Trash in the Finder menu (Macintosh), or open the control panel
and use “Programs and Features” (Windows 8/Windows 7/Windows Vista) or Add or Remove Programs” (Win-
dows XP) to uninstall MyFinePix Studio. Under Windows, one or more con rmation dialogs may be displayed;
read the contents carefully before clicking OK.
100
Printing Pictures via USB
Printing Pictures via USB
If the printer supports PictBridge, the camera can be connected directly to the printer and
pictures can be printed without  rst being copied to a computer. Note that depending on the
printer, not all the functions described below may be supported.
Connecting the Camera
Connecting the Camera
1
Connect a USB cable (available separately
from third-party suppliers) as shown and turn
the printer on.
Q The USB cable must be no more than 1.5 m (4.9 ft.)
long and be suitable for data transfer.
2
Turn the camera on. t USB will be displayed
in the monitor, followed by the PictBridge dis-
play shown below at right.
USB
00
PICTBRIDGE
TOTAL:
00000
SHEETS
SETOK
FRAME
R Pictures can be printed from memory cards that has
been formatted in the camera.
R Page size, print quality, and border selections are
made using the printer.
Printing Selected Pictures
Printing Selected Pictures
1
Press the selector left or right to dis-
play a picture you wish to print.
R To print one copy of the current picture, pro-
ceed directly to Step 3.
2
Press the selector up or down to
choose the number of copies (up to
99). Repeat steps 1–2 to select ad-
ditional pictures.
3
Press MENU/OK to display a con rma-
tion dialog.
PRINT THESE FRAMES
TOTAL:
9
SHEETS
CANCELYES
4
Press MENU/OK to start printing.
101
Connections
Printing Pictures via USB
Printing the Date of Recording
Printing the Date of Recording
To print the date of recording on pictures, press
DISP/BACK in the PictBridge display and select PRINT
WITH DATE s (to print pictures without the date of
recording, select PRINT WITHOUT DATE). To ensure
that the date is correct, set the camera clock before
taking pictures. Some printers do not support date
printing. See the printer manual for details.
Printing the DPOF Print Order
Printing the DPOF Print Order
To print the print order created with K PRINT
ORDER (DPOF) in the playback menu (P 81):
1
In the PictBridge display, press DISP/
BACK to open the PictBridge menu.
2
Press the selector up or down to
highlight u PRINT DPOF.
PICTBRIDGE
PRINT WITH DATE
s
PRINT WITHOUT DATE
PRINT DPOF
3
Press MENU/OK to display a con rma-
tion dialog.
CANCELYES
PRINT DPOF OK?
TOTAL:
9
SHEETS
4
Press MENU/OK to start printing.
102
Printing Pictures via USB
During Printing
During Printing
The message shown at right is
displayed during printing. Press
DISP/BACK to cancel before all
pictures are printed (depending
on the printer, printing may end
before the current picture has
printed).
If printing is interrupted, turn the camera o and
then on again.
Disconnecting the Camera
Disconnecting the Camera
Con rm that the above message is not displayed and
turn the camera o . Disconnect the USB cable.
Creating a DPOF Print Order
Creating a DPOF Print Order
The K PRINT ORDER (DPOF) option in the play-
back menu can be used to create a digital “print
order for PictBridge-compatible printers or de-
vices that support DPOF.
DPOF
DPOF
DPOF (Digital Print Order Format) is stan-
dard that allows pictures to be printed from
“print orders stored on the memory card.
The information in the order includes the
pictures to be printed and the number of copies of
each picture.
CANCEL
PRINTING
103
Connections
Printing Pictures via USB
WITH DATE s/ WITHOUT DATE
To modify the DPOF print order, select K PRINT
ORDER (DPOF) in the playback menu and press
the selector up or down to highlight WITH
DATE s or WITHOUT DATE.
2
PLAYBACK MENU
PHOTOBOOK ASSIST
MARK FOR UPLOAD TO
IMAGE SEARCH
PRINT ORDER (DPOF)
DISP ASPECT
WIRELESS TRANSFER
PC AUTO SAVE
Y
WITH DATE
s
WITHOUT DATE
RESET ALL
WITH DATE s: Print date of recording
on pictures.
WITHOUT DATE: Print pictures without
date.
Press MENU/OK and follow the steps below.
1
Press the selector left or right to dis-
play a picture you wish to include in
or remove from the print order.
2
Press the selector up or down to
choose the number of copies (up
to 99). To remove a picture from the
order, press the selector down until
the number of copies is 0.
01
PRINT ORDER
(
DPOF
)
SHEETS
SETFRAME
DPOF:
00001
Total number of prints
Number of copies
3
Repeat steps 1–2 to complete the
print order. Press MENU/OK to save
the print order when settings are
complete, or DISP/BACK to exit with-
out changing the print order.
4
The total number of prints is dis-
played in the monitor. Press MENU/
OK to exit.
The pictures in the current
print order are indicated by a
u icon during playback.
104
Printing Pictures via USB
RESET ALL
To cancel the current print
order, select RESET ALL for
K PRINT ORDER (DPOF). The
con rmation shown at right
will be displayed; press MENU/OK
to remove all pictures from the
order.
R Print orders can contain a maximum of 999 pictures.
R If a memory card is inserted
containing a print order cre-
ated by another camera, the
message shown at right will
be displayed. Pressing MENU/OK
cancels the print order; a new
print order must be created as
described above.
CANCELYES
RESET DPOF OK?
NOYES
RESET DPOF OK?
105
Connections
Viewing Pictures on TV
Viewing Pictures on TV
To show pictures to a group, connect the camera to a TV using an HDMI cable (available separately
from third-party suppliers; note that the TV can only be used for playback, not shooting).
1
Turn the camera o .
2
Connect the cable as shown below.
Insert into HDMI mini connector
Insert into HDMI connector
Q Use an HDMI cable no more than 1.5m (4.9ft.) long.
R Be sure the connectors are fully inserted.
3
Tune the television to the HDMI input channel. See the documentation supplied with the televi-
sion for details.
4
Turn the camera on and press a button. The camera monitor turns o and pictures and movies
are played back on the TV. Note that the camera volume controls have no e ect on sounds played
on the TV; use the television volume controls to adjust the volume.
R The USB cable can not be used while an HDMI cable is connected.
R Some televisions may brie y display a black screen when movie playback begins.
106
Technical Notes
Technical Notes
Optional Accessories
Optional Accessories
The camera supports a wide range of accessories from FUJIFILM and other manufacturers.
Accessories from FUJIFILM
Accessories from FUJIFILM
The following optional accessories are available from FUJIFILM. For the latest information on the accesso-
ries available in your region, check with your local FUJIFILM representative or visit http://www.fujifilm.com/
products/digital_cameras/index.html.
Rechargeable Li-ion batteries
Rechargeable Li-ion batteries
NP-W126: Additional large-capacity NP-W126 rechargeable batteries can be purchased as required.
Battery chargers
Battery chargers
BC-W126: Replacement battery chargers can be purchased as required. At+20 °C/+68 °F, the BC-W126
charges an NP-W126 in about 150 minutes.
Remote releases
Remote releases
RR-90: Use to reduce camera shake or keep the shutter open during a time exposure.
107
Technical Notes
Optional Accessories
FUJINON lenses
FUJINON lenses
XF-series lenses: Interchangeable lenses for use exclusively with the FUJIFILM X-mount.
XC-series lenses: Interchangeable lenses for use exclusively with the FUJIFILM X-mount.
Shoe-mounted  ash units
Shoe-mounted  ash units
EF-20: This clip-on  ash unit (powered by two AA batteries) has a Guide Number of 20/65 (ISO 100, m/ft.)
and supports TTL  ash control. The  ash head can be rotated upwards 90° for bounce lighting.
EF-42: This clip-on  ash unit (powered by four AA batteries) has a Guide Number of 42/137 (ISO 100, m/ft.)
and supports TTL  ash control and auto power zoom in the range 24–105 mm (35 mm format equivalent).
The  ash head can be rotated 90° up, 180° left, or 120° right for bounce lighting.
EF-X20: This clip-on  ash unit has a Guide Number of 20/65 (ISO 100, m/ft.).
108
Optional Accessories
Mount adapters
Mount adapters
FUJIFILM M MOUNT ADAPTER: Allows the camera to be used with a wide selection of M-mount lenses.
Protective  lters
Protective  lters
PRF-39/PRF-49S/PRF-52/PRF-58/PRF-62: Use to protect the lens.
Grips
Grips
HG-XM1: Features an improved grip.
Leather cases
Leather cases
BLC-XM1: This case, exclusively for use with the X-M1/X-A1, is made with genuine leather and comes with a shoulder strap of
the same material. Pictures can be taken and batteries and memory cards inserted or removed with the camera still in its case.
109
Technical Notes
Optional Accessories
Connecting the Camera to Other Devices
Connecting the Camera to Other Devices
Computer Related
Computer Related
X-A1
Computer
Printing
Printing
Printer
PictBridge-compatible printer
Lens
Lens
XF-series lenses
*
XC-series lenses
*
* Available separately from FUJIFILM.
Available separately from third-party suppliers. USB and HDMI
cables must be no more than 1.5 m (4.9 ft.) long.
USB cable
USB cable
SD/SDHC/SDXC
memory card
HDTV
Flash Photography
Flash Photography
EF-20 shoe mount
ash
*
EF-42 shoe mount
ash
*
EF-X20 shoe
mount  ash
*
Remote Shutter Release
Remote Shutter Release
RR-90 remote release
*
M Mount Adapter
M Mount Adapter
FUJIFILM M MOUNT ADAPTER
*
Audio/Visual
Audio/Visual
HDMI cable
110
Caring for the Camera
Caring for the Camera
To ensure continued enjoyment of the product, observe the following precautions.
Storage and Use
Storage and Use
If the camera will not be used for an extended pe-
riod, remove the battery and memory card. Do
not store or use the camera in locations that are:
exposed to rain, steam, or smoke
very humid or extremely dusty
exposed to direct sunlight or very high temper-
atures, such as in a closed vehicle on a sunny
day
• extremely cold
subject to strong vibration
exposed to strong magnetic  elds, such as near
a broadcasting antenna, power line, radar emit-
ter, motor, transformer, or magnet
in contact with volatile chemicals such as pes-
ticides
next to rubber or vinyl products
Water and Sand
Exposure to water and sand can also damage the
camera and its internal circuitry and mechanisms.
When using the camera at the beach or seaside,
avoid exposing the camera to water or sand. Do
not place the camera on a wet surface.
Condensation
Sudden increases in temperature, such as occur
when entering a heated building on a cold day,
can cause condensation inside the camera. If this
occurs, turn the camera o and wait an hour be-
fore turning it on again. If condensation forms on
the memory card, remove the card and wait for
the condensation to dissipate.
Traveling
Traveling
Keep the camera in your carry-on baggage.
Checked baggage may su er violent shocks that
could damage the camera.
111
Technical Notes
Cleaning the Image Sensor
Cleaning the Image Sensor
Multiple photographs marred by spots or blotches in identical locations may indicate the presence
of dust on the camera image sensor. Clean the sensor using the V SENSOR CLEANING option in
the setup menu (P 86); if the problem persists, you can clean the sensor manually as described below.
Note that there will be a charge to repair or replace the image sensor if it is damaged during cleaning.
1
Use a blower (not a brush) to remove dust from the sensor.
Q Do not use a brush or blower brush. Failure to observe this precaution could damage the sensor.
2
Check whether the dust has been successfully removed.
R Repeat Steps 1 and 2 as necessary.
3
Replace the body cap or lens.
112
Troubleshooting
Troubleshooting
Problems and Solutions
Problems and Solutions
Power and Battery
Power and Battery
Problem
Problem
Solution
Solution
The camera does not
The camera does not
turn on.
turn on.
The battery is exhausted
The battery is exhausted
: Charge the battery (
: Charge the battery (
P
P
12) or insert a fully-charged spare battery (
12) or insert a fully-charged spare battery (
P
P
13).
13).
The battery is inserted incorrectly
The battery is inserted incorrectly
: Reinsert in the correct orientation (
: Reinsert in the correct orientation (
P
P
13).
13).
The battery-chamber cover is not latched
The battery-chamber cover is not latched
: Latch the battery-chamber cover (
: Latch the battery-chamber cover (
P
P
14).
14).
The monitor does not
The monitor does not
turn on.
turn on.
The monitor may not turn on if the camera is turned off and then on again very quickly. Press the shutter button
The monitor may not turn on if the camera is turned off and then on again very quickly. Press the shutter button
halfway to activate the monitor.
halfway to activate the monitor.
The battery runs down
The battery runs down
quickly.
quickly.
The battery is cold
The battery is cold
: Warm the battery by placing it in a pocket or other warm place and reinsert it in the camera
: Warm the battery by placing it in a pocket or other warm place and reinsert it in the camera
immediately before taking a picture.
immediately before taking a picture.
There is dirt on the battery terminals
There is dirt on the battery terminals
: Clean the terminals with a soft, dry cloth.
: Clean the terminals with a soft, dry cloth.
ON
ON
is selected for
is selected for
A
A
SCREEN SET-UP
SCREEN SET-UP
>
>
MONITOR SUNLIGHT MODE
MONITOR SUNLIGHT MODE
: Select
: Select
OFF
OFF
to reduce the drain on
to reduce the drain on
the battery (
the battery (
P
P
84).
84).
u
u
CONTINUOUS
CONTINUOUS
or
or
x
x
TRACKING
TRACKING
is selected for
is selected for
F
F
FOCUS MODE
FOCUS MODE
: Select
: Select
t
t
AREA
AREA
mode (
mode (
P
P
49).
49).
S
S
is selected for shooting mode
is selected for shooting mode
: Select a diff erent shooting mode to reduce the drain on the battery (
: Select a diff erent shooting mode to reduce the drain on the battery (
P
P
34).
34).
The battery has been charged many times
The battery has been charged many times
: The battery has reached the end of its charging life. Purchase a new
: The battery has reached the end of its charging life. Purchase a new
battery.
battery.
The camera turns o
The camera turns o
suddenly.
suddenly.
The battery is exhausted
The battery is exhausted
: Charge the battery (
: Charge the battery (
P
P
12) or insert a fully-charged spare battery (
12) or insert a fully-charged spare battery (
P
P
13).
13).
Charging does not start.
Charging does not start.
Reinsert the battery in the correct orientation and make sure that the charger is plugged in (
Reinsert the battery in the correct orientation and make sure that the charger is plugged in (
P
P
12).
12).
Charging is slow.
Charging is slow.
Charge the battery at room temperature (
Charge the battery at room temperature (
P
P
iv).
iv).
The charging lamp blinks,
The charging lamp blinks,
but the battery does not
but the battery does not
charge.
charge.
There is dirt on the battery terminals
There is dirt on the battery terminals
: Clean the terminals with a soft, dry cloth.
: Clean the terminals with a soft, dry cloth.
The battery has been charged many times
The battery has been charged many times
: The battery has reached the end of its charging life. Purchase a new
: The battery has reached the end of its charging life. Purchase a new
battery. If the battery still fails to charge, contact your FUJIFILM dealer.
battery. If the battery still fails to charge, contact your FUJIFILM dealer.
113
Troubleshooting
Problems and Solutions
Menus and Displays
Menus and Displays
Problem
Problem
Solution
Solution
Display is not in English.
Display is not in English.
Select
Select
ENGLISH
ENGLISH
for
for
Q
Q
a
a
(
(
P
P
83).
83).
Shooting
Shooting
Problem
Problem
Solution
Solution
No picture is taken when
No picture is taken when
the shutter button is
the shutter button is
pressed.
pressed.
The memory card is full
The memory card is full
: Insert a new memory card or delete pictures (
: Insert a new memory card or delete pictures (
P
P
13, 26).
13, 26).
The memory card is not formatted
The memory card is not formatted
: Format the memory card (
: Format the memory card (
P
P
87).
87).
There is dirt on the memory card contacts
There is dirt on the memory card contacts
: Clean the contacts with a soft, dry cloth.
: Clean the contacts with a soft, dry cloth.
The memory card is damaged
The memory card is damaged
: Insert a new memory card (
: Insert a new memory card (
P
P
13).
13).
The battery is exhausted
The battery is exhausted
: Charge the battery (
: Charge the battery (
P
P
12) or insert a fully-charged spare battery (
12) or insert a fully-charged spare battery (
P
P
13).
13).
The camera has turned o automatically
The camera has turned o automatically
: Turn the camera on (
: Turn the camera on (
P
P
17).
17).
Mottling (“noise”) appears
Mottling (“noise”) appears
in the monitor when the
in the monitor when the
shutter button is pressed
shutter button is pressed
halfway.
halfway.
Gain is increased to aid composition when the subject is poorly lit and aperture is stopped down, which may result
Gain is increased to aid composition when the subject is poorly lit and aperture is stopped down, which may result
in noticeable mottling when images are previewed in the displays. Images taken with the camera are unaff ected.
in noticeable mottling when images are previewed in the displays. Images taken with the camera are unaff ected.
The camera does not focus.
The camera does not focus.
The subject is close to the camera
The subject is close to the camera
: Select macro mode (
: Select macro mode (
P
P
29).
29).
The subject is far away from the camera
The subject is far away from the camera
: Cancel macro mode (
: Cancel macro mode (
P
P
29).
29).
The subject is not suited to autofocus
The subject is not suited to autofocus
: Use focus lock (
: Use focus lock (
P
P
53) or manual focus (
53) or manual focus (
P
P
49, 50).
49, 50).
Macro mode is not avail-
Macro mode is not avail-
able.
able.
Choose a diff erent shooting mode (
Choose a diff erent shooting mode (
P
P
33, 128).
33, 128).
Intelligent Face Detection
Intelligent Face Detection
is not available.
is not available.
Intelligent Face Detection is not available in the current shooting mode
Intelligent Face Detection is not available in the current shooting mode
: Choose a diff erent shooting mode (
: Choose a diff erent shooting mode (
P
P
33,
33,
128).
128).
No face is detected.
No face is detected.
The subjects face is obscured by sunglasses, a hat, long hair, or other objects
The subjects face is obscured by sunglasses, a hat, long hair, or other objects
: Remove the obstructions.
: Remove the obstructions.
The subjects face occupies only a small area of the frame
The subjects face occupies only a small area of the frame
: Change the composition so that the subjects face oc-
: Change the composition so that the subject’s face oc-
cupies a larger area of the frame (
cupies a larger area of the frame (
P
P
53).
53).
The subjects head is tilted or horizontal
The subjects head is tilted or horizontal
: Ask the subject to hold their head straight.
: Ask the subject to hold their head straight.
The camera is tilted
The camera is tilted
: Keep the camera level (
: Keep the camera level (
P
P
22).
22).
The subjects face is poorly lit
The subjects face is poorly lit
: Shoot in bright light.
: Shoot in bright light.
114
Problems and Solutions
Problem
Problem
Solution
Solution
Wrong subject is selected.
Wrong subject is selected.
The selected subject is closer to the center of the frame than the main subject. Recompose the picture or turn face
The selected subject is closer to the center of the frame than the main subject. Recompose the picture or turn face
detection off and frame the picture using focus lock (
detection off and frame the picture using focus lock (
P
P
53).
53).
The  ash does not  re.
The  ash does not  re.
The  ash can not be used at current settings
The  ash can not be used at current settings
: See the list of the settings that can be used with the fl ash (
: See the list of the settings that can be used with the fl ash (
P
P
131).
131).
The  ash is lowered
The  ash is lowered
: Raise the fl ash (
: Raise the fl ash (
P
P
27).
27).
The battery is exhausted
The battery is exhausted
: Charge the battery (
: Charge the battery (
P
P
12) or insert a fully-charged spare battery (
12) or insert a fully-charged spare battery (
P
P
13).
13).
The camera is in bracketing or continuous mode
The camera is in bracketing or continuous mode
: Select single frame mode (
: Select single frame mode (
P
P
59, 60).
59, 60).
The camera is in silent mode
The camera is in silent mode
: Turn silent mode off (
: Turn silent mode off (
P
P
4).
4).
Some  ash modes are not
Some  ash modes are not
available.
available.
The camera is in silent mode. Turn silent mode off (
The camera is in silent mode. Turn silent mode off (
P
P
4).
4).
The  ash does not fully
The  ash does not fully
light the subject.
light the subject.
The subject is not in range of the  ash
The subject is not in range of the  ash
: Position the subject in range of the fl ash (
: Position the subject in range of the fl ash (
P
P
124).
124).
The  ash window is obstructed
The  ash window is obstructed
: Hold the camera correctly (
: Hold the camera correctly (
P
P
22).
22).
Shutter speed is faster than
Shutter speed is faster than
/
/


s
s
: Choose a slower shutter speed (
: Choose a slower shutter speed (
P
P
28, 41, 43).
28, 41, 43).
Pictures are blurred.
Pictures are blurred.
The lens is dirty
The lens is dirty
: Clean the lens (
: Clean the lens (
P
P
xi).
xi).
The lens is blocked
The lens is blocked
: Keep objects away from the lens.
: Keep objects away from the lens.
s
s
is displayed during shooting and the focus frame is displayed in red
is displayed during shooting and the focus frame is displayed in red
: Check focus before shooting (
: Check focus before shooting (
P
P
22).
22).
k
k
is displayed during shooting
is displayed during shooting
: Use the fl ash or mount the camera on a tripod (
: Use the fl ash or mount the camera on a tripod (
P
P
118).
118).
Pictures are mottled.
Pictures are mottled.
Shutter speed is slow and the ambient temperature is high
Shutter speed is slow and the ambient temperature is high
: This is normal and does not indicate a malfunction.
: This is normal and does not indicate a malfunction.
The camera has been used continuously at high temperatures or a temperature warning is displayed
The camera has been used continuously at high temperatures or a temperature warning is displayed
: Turn the cam-
: Turn the cam-
era off and wait for it to cool down.
era off and wait for it to cool down.
Sounds made by the
Sounds made by the
camera are recorded with
camera are recorded with
movies.
movies.
u
u
CONTINUOUS
CONTINUOUS
is selected for
is selected for
W
W
MOVIE SET-UP
MOVIE SET-UP
>
>
FOCUS MODE
FOCUS MODE
: Select
: Select
r
r
CENTER
CENTER
(
(
P
P
75).
75).
Zoom was adjusted during shooting
Zoom was adjusted during shooting
: Do not adjust zoom during shooting.
: Do not adjust zoom during shooting.
Intelligent Face Detection is on
Intelligent Face Detection is on
: Turn Intelligent Face Detection off (
: Turn Intelligent Face Detection off (
P
P
74).
74).
115
Troubleshooting
Problems and Solutions
Playback
Playback
Problem
Problem
Solution
Solution
Pictures are grainy.
Pictures are grainy.
The pictures were taken with a diff erent make or model of camera.
The pictures were taken with a diff erent make or model of camera.
Playback zoom is unavail-
Playback zoom is unavail-
able.
able.
The pictures were created using
The pictures were created using
O
O
RESIZE
RESIZE
or with a diff erent make or model of camera.
or with a diff erent make or model of camera.
No sound in movie
No sound in movie
playback.
playback.
Playback volume is too low
Playback volume is too low
: Adjust playback volume (
: Adjust playback volume (
P
P
84).
84).
The microphone was obstructed
The microphone was obstructed
: Hold the camera correctly during recording (
: Hold the camera correctly during recording (
P
P
2, 30).
2, 30).
The speaker is obstructed
The speaker is obstructed
: Hold the camera correctly during playback (
: Hold the camera correctly during playback (
P
P
2, 31).
2, 31).
The camera is in silent mode
The camera is in silent mode
: Turn silent mode off (
: Turn silent mode off (
P
P
4).
4).
Selected pictures are not
Selected pictures are not
deleted.
deleted.
Some of the pictures selected for deletion are protected. Remove protection using the device with which it was
Some of the pictures selected for deletion are protected. Remove protection using the device with which it was
originally applied (
originally applied (
P
P
78).
78).
File numbering is unex-
File numbering is unex-
pectedly reset.
pectedly reset.
The battery-chamber cover was opened while the camera was on. Turn the camera off before opening the bat-
The battery-chamber cover was opened while the camera was on. Turn the camera off before opening the bat-
tery-chamber cover (
tery-chamber cover (
P
P
13, 17).
13, 17).
116
Problems and Solutions
Connections/Miscellaneous
Connections/Miscellaneous
Problem
Problem
Solution
Solution
Problem connecting or
Problem connecting or
uploading pictures to
uploading pictures to
smartphone.
smartphone.
The smartphone is too far away
The smartphone is too far away
: Move the devices closer.
: Move the devices closer.
Nearby devices are causing radio interference
Nearby devices are causing radio interference
: Move the camera and smartphone away from microwave ovens or
: Move the camera and smartphone away from microwave ovens or
cordless phones.
cordless phones.
Can not upload images.
Can not upload images.
The smartphone is connected to another device
The smartphone is connected to another device
: The smartphone and camera can connect to only one device at a
: The smartphone and camera can connect to only one device at a
time. End the connection and try again.
time. End the connection and try again.
There are several smartphones in the vicinity
There are several smartphones in the vicinity
: Try connecting again. The presence of multiple smartphones can
: Try connecting again. The presence of multiple smartphones can
make connection diffi cult.
make connection diffi cult.
Selecting
Selecting
TRANSMIT
TRANSMIT
or
or
tapping
tapping
q
q
has no e ect.
has no e ect.
The current image is a movie or was created on another device and can not be uploaded to a smartphone.
The current image is a movie or was created on another device and can not be uploaded to a smartphone.
Smartphone will not
Smartphone will not
display pictures.
display pictures.
Select
Select
ON
ON
for
for
r
r
WIRELESS SETTING
WIRELESS SETTING
>
>
RESIZE IMAGE FOR SMARTPHONE
RESIZE IMAGE FOR SMARTPHONE
H
H
. Selecting
. Selecting
OFF
OFF
increases
increases
upload times for larger images; in addition, some phones may not display images over a certain size.
upload times for larger images; in addition, some phones may not display images over a certain size.
No picture or sound.
No picture or sound.
The camera is not properly connected
The camera is not properly connected
: Connect the camera properly (
: Connect the camera properly (
P
P
105
). Note that once the camera is con-
). Note that once the camera is con-
nected, pictures will be displayed on the TV instead of in the camera monitor.
nected, pictures will be displayed on the TV instead of in the camera monitor.
Input on the television is set to “TV”
Input on the television is set to “TV”
: Set input to “HDMI”.
: Set input to “HDMI”.
The volume on the TV is too low
The volume on the TV is too low
: Use the controls on the television to adjust the volume.
: Use the controls on the television to adjust the volume.
The computer does not
The computer does not
recognize the camera.
recognize the camera.
Be sure the camera and computer are correctly connected (
Be sure the camera and computer are correctly connected (
P
P
98
).
).
Can not transfer RAW or
Can not transfer RAW or
JPEG  les to computer.
JPEG  les to computer.
Use the bundled software to transfer pictures (
Use the bundled software to transfer pictures (
P
P
95
).
).
Pictures can not be
Pictures can not be
printed.
printed.
The camera is not properly connected
The camera is not properly connected
: Connect the camera correctly (
: Connect the camera correctly (
P
P
100
).
).
The printer is o
The printer is o
: Turn the printer on.
: Turn the printer on.
117
Troubleshooting
Problems and Solutions
Problem
Problem
Solution
Solution
Only one copy is printed/
Only one copy is printed/
the date is not printed.
the date is not printed.
The printer is not PictBridge compatible.
The printer is not PictBridge compatible.
The camera is unrespon-
The camera is unrespon-
sive.
sive.
Temporary camera malfunction
Temporary camera malfunction
: Remove and reinsert the battery (
: Remove and reinsert the battery (
P
P
13, 15).
13, 15).
The battery is exhausted
The battery is exhausted
: Charge the battery (
: Charge the battery (
P
P
12) or insert a fully-charged spare battery (
12) or insert a fully-charged spare battery (
P
P
13).
13).
The camera does not func-
The camera does not func-
tion as expected.
tion as expected.
Remove and reinsert the battery (
Remove and reinsert the battery (
P
P
13, 15). If the problem persists, contact your FUJIFILM dealer.
13, 15). If the problem persists, contact your FUJIFILM dealer.
No sound.
No sound.
Turn silent mode off (
Turn silent mode off (
P
P
4).
4).
Hue or content of display
Hue or content of display
changes unexpectedly.
changes unexpectedly.
Choose
Choose
OFF
OFF
for
for
A
A
SCREEN SET-UP
SCREEN SET-UP
>
>
MONITOR SUNLIGHT MODE
MONITOR SUNLIGHT MODE
(
(
P
P
84).
84).
Time and date stamps
Time and date stamps
Time and date stamps are not correct
Time and date stamps are not correct
: Set the camera clock (
: Set the camera clock (
P
P
18, 83).
18, 83).
Time and date stamps appear on photographs
Time and date stamps appear on photographs
: Time and date stamps can not be deleted. To prevent stamps ap-
: Time and date stamps can not be deleted. To prevent stamps ap-
pearing on new photographs, select
pearing on new photographs, select
OFF
OFF
for
for
U
U
DATE STAMP
DATE STAMP
(
(
P
P
86).
86).
118
Warning Messages and Displays
Warning Messages and Displays
The following warnings appear in the display.
Warning
Warning
Description
Description
B
B
(red)
(red)
Low battery. Charge the battery (
Low battery. Charge the battery (
P
P
12) or insert a fully-charged spare battery (
12) or insert a fully-charged spare battery (
P
P
13).
13).
A
A
(blinks red)
(blinks red)
Battery exhausted. Charge the battery (
Battery exhausted. Charge the battery (
P
P
12) or insert a fully-charged spare battery (
12) or insert a fully-charged spare battery (
P
P
13).
13).
k
k
Slow shutter speed. Pictures may be blurred; use the fl ash or a tripod.
Slow shutter speed. Pictures may be blurred; use the fl ash or a tripod.
s
s
(displayed in red with
(displayed in red with
red focus frame)
red focus frame)
The camera can not focus. Try one of the following solutions:
The camera can not focus. Try one of the following solutions:
Use focus lock to focus on another subject at the same distance, then recompose the picture (
Use focus lock to focus on another subject at the same distance, then recompose the picture (
P
P
53).
53).
Use macro mode to focus when taking close-ups (
Use macro mode to focus when taking close-ups (
P
P
29).
29).
Aperture or shutter speed
Aperture or shutter speed
displayed in red
displayed in red
The subject is too bright or too dark and the picture will be over- or under-exposed. Use the ash for additional
The subject is too bright or too dark and the picture will be over- or under-exposed. Use the fl ash for additional
lighting when taking photographs of poorly-lit subjects (
lighting when taking photographs of poorly-lit subjects (
P
P
27).
27).
FOCUS ERROR
FOCUS ERROR
Camera malfunction. Turn the camera off and then on again. If the message persists, contact a FUJIFILM dealer.
Camera malfunction. Turn the camera off and then on again. If the message persists, contact a FUJIFILM dealer.
TURN OFF THE CAMERA
TURN OFF THE CAMERA
AND TURN ON AGAIN
AND TURN ON AGAIN
LENS CONTROL ERROR
LENS CONTROL ERROR
LENS ERROR
LENS ERROR
Turn the camera off , remove the lens, and clean the mounting surfaces, then replace the lens and turn the camera
Turn the camera off , remove the lens, and clean the mounting surfaces, then replace the lens and turn the camera
on. If the problem persists, contact a FUJIFILM dealer.
on. If the problem persists, contact a FUJIFILM dealer.
BUSY
BUSY
The memory card is incorrectly formatted. Use the camera to format the card (
The memory card is incorrectly formatted. Use the camera to format the card (
P
P
87).
87).
CARD NOT INITIALIZED
CARD NOT INITIALIZED
The memory card is not formatted or the memory card has been formatted in a computer or other device
The memory card is not formatted or the memory card has been formatted in a computer or other device
: Format the
: Format the
memory card using the
memory card using the
K
K
FORMAT
FORMAT
option in the camera setup menu (
option in the camera setup menu (
P
P
87).
87).
The memory card contacts require cleaning
The memory card contacts require cleaning
: Clean the contacts with a soft, dry cloth. If the message is repeated,
: Clean the contacts with a soft, dry cloth. If the message is repeated,
format the card (
format the card (
P
P
87). If the message persists, replace the card.
87). If the message persists, replace the card.
Camera malfunction
Camera malfunction
: Contact a FUJIFILM dealer.
: Contact a FUJIFILM dealer.
PROTECTED CARD
PROTECTED CARD
The memory card is locked. Unlock the card (
The memory card is locked. Unlock the card (
P
P
14).
14).
119
Troubleshooting
Warning Messages and Display
Warning
Warning
Description
Description
CARD ERROR
CARD ERROR
The memory card is not formatted for use in the camera
The memory card is not formatted for use in the camera
: Format the card (
: Format the card (
P
P
87).
87).
The memory card contacts require cleaning or the memory card is damaged
The memory card contacts require cleaning or the memory card is damaged
: Clean the contacts with a soft, dry
: Clean the contacts with a soft, dry
cloth. If the message is repeated, format the card (
cloth. If the message is repeated, format the card (
P
P
87). If the message persists, replace the card.
87). If the message persists, replace the card.
Incompatible memory card
Incompatible memory card
: Use a compatible card (
: Use a compatible card (
P
P
16).
16).
Camera malfunction
Camera malfunction
: Contact a FUJIFILM dealer.
: Contact a FUJIFILM dealer.
b
b
MEMORY FULL
MEMORY FULL
The memory card is full and pictures can not be recorded. Delete pictures (
The memory card is full and pictures can not be recorded. Delete pictures (
P
P
26) or insert a memory card with
26) or insert a memory card with
more free space (
more free space (
P
P
13).
13).
NO CARD
NO CARD
The shutter can only be released when a memory card is inserted. Insert a memory card.
The shutter can only be released when a memory card is inserted. Insert a memory card.
WRITE ERROR
WRITE ERROR
Memory card error or connection error
Memory card error or connection error
: Reinsert the card or turn the camera off and then on again. If the message
: Reinsert the card or turn the camera off and then on again. If the message
persists, contact a FUJIFILM dealer.
persists, contact a FUJIFILM dealer.
Not enough memory remaining to record additional pictures
Not enough memory remaining to record additional pictures
: Delete pictures (
: Delete pictures (
P
P
26) or insert a memory card with
26) or insert a memory card with
more free space (
more free space (
P
P
13).
13).
The memory card is not formatted
The memory card is not formatted
: Format the memory card (
: Format the memory card (
P
P
87).
87).
READ ERROR
READ ERROR
The  le is corrupt or was not created with the camera
The  le is corrupt or was not created with the camera
: The fi le can not be viewed.
: The fi le can not be viewed.
The memory card contacts require cleaning
The memory card contacts require cleaning
: Clean the contacts with a soft, dry cloth. If the message is repeated,
: Clean the contacts with a soft, dry cloth. If the message is repeated,
format the card (
format the card (
P
P
87). If the message persists, replace the card.
87). If the message persists, replace the card.
Camera malfunction
Camera malfunction
: Contact a FUJIFILM dealer.
: Contact a FUJIFILM dealer.
FRAME NO. FULL
FRAME NO. FULL
The camera has run out of frame numbers (current frame number is 999-9999). Format the memory card and
The camera has run out of frame numbers (current frame number is 999-9999). Format the memory card and
select
select
RENEW
RENEW
for
for
B
B
FRAME NO.
FRAME NO.
Take a picture to reset frame numbering to 100-0001, then select
Take a picture to reset frame numbering to 100-0001, then select
CONTINU-
CONTINU-
OUS
OUS
for
for
B
B
FRAME NO.
FRAME NO.
(
(
P
P
85).
85).
PRESS AND HOLD
PRESS AND HOLD
THE DISP BUTTON TO
THE DISP BUTTON TO
DEACTIVATE SILENT MODE
DEACTIVATE SILENT MODE
An attempt was made to choose a ash mode or adjust the volume with the camera in silent mode. Exit silent
An attempt was made to choose a fl ash mode or adjust the volume with the camera in silent mode. Exit silent
mode before choosing a fl ash mode or adjusting the volume (
mode before choosing a fl ash mode or adjusting the volume (
P
P
4).
4).
TOO MANY FRAMES
TOO MANY FRAMES
A search has returned more than 30,000 results
A search has returned more than 30,000 results
: Choose a search that returns fewer results.
: Choose a search that returns fewer results.
More than 999 images are selected for deletion
More than 999 images are selected for deletion
: Choose fewer images.
: Choose fewer images.
120
Warning Messages and Display
Warning
Warning
Description
Description
PROTECTED FRAME
PROTECTED FRAME
An attempt was made to delete or rotate to a protected picture. Remove protection and try again (
An attempt was made to delete or rotate to a protected picture. Remove protection and try again (
P
P
78).
78).
CAN NOT CROP
CAN NOT CROP
The picture is damaged or was not created with the camera.
The picture is damaged or was not created with the camera.
m
m
CANNOT EXECUTE
CANNOT EXECUTE
Red-eye removal can not be applied to pictures created with other devices.
Red-eye removal can not be applied to pictures created with other devices.
F
F
CANNOT EXECUTE
CANNOT EXECUTE
Red-eye removal can not be applied to movies.
Red-eye removal can not be applied to movies.
CAN NOT ROTATE
CAN NOT ROTATE
The selected picture can not be rotated.
The selected picture can not be rotated.
F
F
CAN NOT ROTATE
CAN NOT ROTATE
Movies can not be rotated.
Movies can not be rotated.
DPOF FILE ERROR
DPOF FILE ERROR
The DPOF print order on the current memory card contains more than 999 images. Copy the pictures to a com-
The DPOF print order on the current memory card contains more than 999 images. Copy the pictures to a com-
puter and create a new print order.
puter and create a new print order.
CAN NOT SET DPOF
CAN NOT SET DPOF
The picture can not be printed using DPOF.
The picture can not be printed using DPOF.
F
F
CAN NOT SET DPOF
CAN NOT SET DPOF
Movies can not be printed using DPOF.
Movies can not be printed using DPOF.
COMMUNICATION ERROR
COMMUNICATION ERROR
A connection error occurred while pictures were being printed or copied to a computer or other device. Confi rm
A connection error occurred while pictures were being printed or copied to a computer or other device. Confi rm
that the device is turned on and that the USB cable is connected.
that the device is turned on and that the USB cable is connected.
PRINTER ERROR
PRINTER ERROR
Printer out of paper or ink, or other printer error. Check printer (see printer manual for details). To resume printing,
Printer out of paper or ink, or other printer error. Check printer (see printer manual for details). To resume printing,
turn the printer off and then turn it back on.
turn the printer off and then turn it back on.
PRINTER ERROR
PRINTER ERROR
RESUME?
RESUME?
Printer out of paper or ink, or other printer error. Check printer (see printer manual for details). If printing does not
Printer out of paper or ink, or other printer error. Check printer (see printer manual for details). If printing does not
resume automatically, press
resume automatically, press
MENU/OK
MENU/OK
to resume.
to resume.
CANNOT BE PRINTED
CANNOT BE PRINTED
An attempt was made to print a movie, a picture not created with the camera, or a picture in a format not sup-
An attempt was made to print a movie, a picture not created with the camera, or a picture in a format not sup-
ported by the printer. Movies, RAW images, and some pictures created with other devices can not be printed; if
ported by the printer. Movies, RAW images, and some pictures created with other devices can not be printed; if
the picture is a still picture created with the camera, check the printer manual to confi rm that the printer supports
the picture is a still picture created with the camera, check the printer manual to confi rm that the printer supports
the JFIF-JPEG or Exif-JPEG format. If it does not, the pictures can not be printed.
the JFIF-JPEG or Exif-JPEG format. If it does not, the pictures can not be printed.
p
p
Turn the camera off and wait for it to cool. Mottling may increase in pictures taken when this warning is displayed.
Turn the camera off and wait for it to cool. Mottling may increase in pictures taken when this warning is displayed.
121
Appendix
Appendix
Appendix
Memory Card Capacity
Memory Card Capacity
The following table shows the recording time or number of pictures available at di erent image sizes.
All  gures are approximate;  le size varies with the scene recorded, producing wide variations in the
number of  les that can be stored. The number of exposures or length remaining may not diminish
at an even rate.
Capacity
Capacity
O
O
4 GB
4 GB
8 GB
8 GB
FINE
FINE
NORMAL
NORMAL
FINE
FINE
NORMAL
NORMAL
Photographs
Photographs
O
O
3 : 2
3 : 2
600
600
960
960
1210
1210
1910
1910
RAW
RAW
150
150
310
310
Movies
Movies
1
1
i
i
1920×1080 30fps
1920×1080 30fps
2
2
13 min.
13 min.
26 min.
26 min.
h
h
1280×720 30fps
1280×720 30fps
3
3
25 min.
25 min.
51 min.
51 min.
1 Use a H card or better.
2 Individual movies can not exceed 14 minutes in length.
3 Individual movies can not exceed 27 minutes in length.
122
The Command Dials
The Command Dials
The roles played by the command dials vary as shown below.
Mode
Mode
P (program AE;
P (program AE;
P
P
40)
40)
S (shutter-priority
S (shutter-priority
AE;
AE;
P
P
41)
41)
A (aperture-priori-
A (aperture-priori-
ty AE;
ty AE;
P
P
42)
42)
M (manual;
M (manual;
P
P
44)
44)
Playback
Playback
(
(
P
P
23)
23)
Lens
Lens
Aperture ring
Aperture ring
Aperture
Aperture
Main command dial
Main command dial
Yes
Yes
A
A
Exposure compensation
Exposure compensation
Shutter speed
Shutter speed
Frame advance
Frame advance
Other
Other
1
1
No
No
Sub-command dial
Sub-command dial
Yes
Yes
A
A
Program shift
Program shift
Shutter speed
Shutter speed
Aperture
Aperture
Playback zoom/
Playback zoom/
thumbnail
thumbnail
playback
playback
Other
Other
1
1
2
2
No
No
Aperture
Aperture
1 If lens is equipped with an aperture mode switch, select Z.
2 Use aperture ring to adjust aperture.
123
Appendix
Speci cations
Speci cations
System
Model
Model
FUJIFILM X-A1
FUJIFILM X-A1
digital camera
digital camera
E ective pixels
E ective pixels
16.3 million
16.3 million
Image sensor
Image sensor
23.6 mm × 15.6 mm (APS-C format), CMOS (complementary metal-oxide semiconductor) image sensor with
23.6 mm × 15.6 mm (APS-C format), CMOS (complementary metal-oxide semiconductor) image sensor with
square pixels and primary color fi lter
square pixels and primary color fi lter
Storage media
Storage media
FUJIFILM-recommended SD/SDHC/SDXC memory cards
FUJIFILM-recommended SD/SDHC/SDXC memory cards
File system
File system
Compliant with
Compliant with
D
D
esign Rule for
esign Rule for
C
C
amera
amera
F
F
ile System
ile System
(DCF)
(DCF)
, Exif 2.3, and
, Exif 2.3, and
D
D
igital
igital
P
P
rint
rint
O
O
rder
rder
F
F
ormat
ormat
(DPOF)
(DPOF)
File format
File format
Still pictures
Still pictures
: Exif 2.3 JPEG
: Exif 2.3 JPEG
(compressed)
(compressed)
; RAW
; RAW
(original RAF format, special-purpose software required)
(original RAF format, special-purpose software required)
; RAW+JPG available
; RAW+JPG available
Movies
Movies
: H.264 compliant with stereo sound compressed using linear PCM
: H.264 compliant with stereo sound compressed using linear PCM
(MOV)
(MOV)
Image size
Image size
O
O
3 : 2
3 : 2
: 4,896 × 3,264
: 4,896 × 3,264
P
P
3 : 2
3 : 2
: 3,456 × 2,304
: 3,456 × 2,304
Q
Q
3 : 2
3 : 2
: 2,496 × 1,664
: 2,496 × 1,664
O
O
16 : 9
16 : 9
: 4,896 × 2,760
: 4,896 × 2,760
P
P
16 : 9
16 : 9
: 3,456 × 1,944
: 3,456 × 1,944
Q
Q
16 : 9
16 : 9
: 2,496 × 1,408
: 2,496 × 1,408
O
O
1 : 1
1 : 1
: 3,264 × 3,264
: 3,264 × 3,264
P
P
1 : 1
1 : 1
: 2,304 × 2,304
: 2,304 × 2,304
Q
Q
1 : 1
1 : 1
: 1,664 × 1,664
: 1,664 × 1,664
Lens mount
Lens mount
FUJIFILM X mount
FUJIFILM X mount
Sensitivity
Sensitivity
Standard output sensitivity equivalent to ISO 200 6400 in increments of
Standard output sensitivity equivalent to ISO 200 6400 in increments of
/
/
EV; AUTO; extended output sensitivity
EV; AUTO; extended output sensitivity
equivalent to ISO 100, 12800, or 25600
equivalent to ISO 100, 12800, or 25600
Metering
Metering
256-segment
256-segment
t
t
hrough-
hrough-
t
t
he-
he-
l
l
ens (TTL) metering; MULTI, SPOT, AVERAGE
ens (TTL) metering; MULTI, SPOT, AVERAGE
Exposure control
Exposure control
Programmed AE
Programmed AE
(with program shift)
(with program shift)
; shutter-priority AE; aperture-priority AE; manual exposure
; shutter-priority AE; aperture-priority AE; manual exposure
Exposure compensation
Exposure compensation
–2 EV +2 EV in increments of
–2 EV – +2 EV in increments of
/
/
EV
EV
Shutter speed
Shutter speed
(mechanical shutter)
(mechanical shutter)
P
P
mode
mode
:
:
/
/
sec. to
sec. to
/
/


sec.
sec.
Bulb
Bulb
: Max. 60 min.
: Max. 60 min.
Time
Time
: 30 sec. to 1 sec.
: 30 sec. to 1 sec.
All other modes
All other modes
: 30 sec. to
: 30 sec. to
/
/


sec.
sec.
124
Speci cations
System
Continuous
Continuous
Mode
Mode
Frame rate (fps)
Frame rate (fps)
Frames per burst
Frames per burst
Bracketing
Bracketing
I
I
J
J
5.6
5.6
Up to approximately 30
Up to approximately 30
(use a
(use a
H
H
card or better)
card or better)
O
O
3.0
3.0
Up to approximately 50
Up to approximately 50
(use a
(use a
H
H
card or better)
card or better)
O
O
3
3
Exposure (normal, over, under)
Exposure (normal, over, under)
W
W
ISO
ISO
X
X
Film simulation (three of
Film simulation (three of
c
c
,
,
d
d
,
,
e
e
,
,
b
b
, and
, and
f
f
)
)
Y
Y
Dynamic range (
Dynamic range (
A
A
100%
100%
,
,
B
B
200%
200%
,
,
C
C
400%
400%
)
)
Focus
Focus
Mode
Mode
: Single or continuous AF; manual focus with focus ring
: Single or continuous AF; manual focus with focus ring
Focus-area selection
Focus-area selection
: Manual focus, multi, area with focus area size selection (7 × 7 = 49 areas available), continu-
: Manual focus, multi, area with focus area size selection (7 × 7 = 49 areas available), continu-
ous, subject tracking
ous, subject tracking
Autofocus system
Autofocus system
: Contrast-detect TTL AF with AF-assist illuminator
: Contrast-detect TTL AF with AF-assist illuminator
White balance
White balance
Auto, direct sunlight, shade, daylight uorescent, warm white uorescent, cool white uorescent, incandescent,
Auto, direct sunlight, shade, daylight fl uorescent, warm white fl uorescent, cool white fl uorescent, incandescent,
custom
custom
Self-timer
Self-timer
Off , 2 sec., 10 sec.
Off , 2 sec., 10 sec.
Flash
Flash
Type
Type
: Manual pop-up fl ash unit
: Manual pop-up fl ash unit
Guide number
Guide number
: Approx. 7/22 (ISO 200, m/ft.)
: Approx. 7/22 (ISO 200, m/ft.)
Mode
Mode
Auto, fi ll ash, off , slow sync, rear-curtain sync, commander
Auto, fi ll fl ash, off , slow sync, rear-curtain sync, commander
(red-eye removal o )
(red-eye removal o )
; auto with red-eye removal, fi ll fl ash
; auto with red-eye removal, fi ll fl ash
with red-eye remova
with red-eye remova
l, off , s
l, off , s
low sync with red-eye removal, rear-curtain sync with red-eye removal, commander
low sync with red-eye removal, rear-curtain sync with red-eye removal, commander
(red-eye removal on)
(red-eye removal on)
Hot shoe
Hot shoe
Accessory shoe with TTL contacts
Accessory shoe with TTL contacts
LCD monitor
LCD monitor
3.0-in/7.6 cm, 920k-dot color LCD monitor; frame coverage approx. 100%
3.0-in/7.6 cm, 920k-dot color LCD monitor; frame coverage approx. 100%
Movies
Movies
i
i
1920 × 1080 30 fps
1920 × 1080 30 fps
: Frame size 1,920 × 1,080 (1080p); 30 fps; stereo sound; maximum length 14 minutes
: Frame size 1,920 × 1,080 (1080p); 30 fps; stereo sound; maximum length 14 minutes
h
h
1280 × 720 30 fps
1280 × 720 30 fps
: Frame size 1,280 × 720 (720p); 30 fps; stereo sound; maximum length 27 minutes
: Frame size 1,280 × 720 (720p); 30 fps; stereo sound; maximum length 27 minutes
125
Appendix
Speci cations
Input/output terminals
HDMI output
HDMI output
HDMI mini connector
HDMI mini connector
Digital input/output
Digital input/output
USB 2.0 High-Speed
USB 2.0 High-Speed
Power supply/other
Power supply
Power supply
NP-W126 rechargeable battery
NP-W126 rechargeable battery
Battery life
Battery life
(approximate
(approximate
number of frames that can
number of frames that can
be taken with a fully-charged
be taken with a fully-charged
battery and XF 35 mm f/1.4 R
battery and XF 35 mm f/1.4 R
lens)
lens)
Battery type
Battery type
Approximate number of frames
Approximate number of frames
NP-W126
NP-W126
(type supplied with camera)
(type supplied with camera)
350
350
CIPA standard, measured using battery supplied with camera and SD memory card.
CIPA standard, measured using battery supplied with camera and SD memory card.
Note
Note
: Number of shots that can be taken with battery varies with battery charge level and will decline at low
: Number of shots that can be taken with battery varies with battery charge level and will decline at low
temperatures.
temperatures.
Camera size
Camera size
(W × H × D)
(W × H × D)
116.9mm × 66.5 mm × 39.0 mm (
116.9mm × 66.5 mm × 39.0 mm (
32.1 mm excluding projections, measured at thinnest part
32.1 mm excluding projections, measured at thinnest part
)/4.6 in. × 2.6 in. × 1.5 in. (1.2 in.)
)/4.6 in. × 2.6 in. × 1.5 in. (1.2 in.)
Camera weight
Camera weight
Approx. 280 g/9.8 oz., excluding battery, accessories, and memory card
Approx. 280 g/9.8 oz., excluding battery, accessories, and memory card
Shooting weight
Shooting weight
Approx. 330 g/11.6 oz., including battery and memory card
Approx. 330 g/11.6 oz., including battery and memory card
Operating conditions
Operating conditions
Temperature
Temperature
: 0 °C to +40 °C/+32 °F to +104 °F
: 0 °C to +40 °C/+32 °F to +104 °F
Humidity
Humidity
: 10% 80%
: 10% – 80%
(no condensation)
(no condensation)
Wireless transmitter
Standards
Standards
IEEE 802.11b/g/n
IEEE 802.11b/g/n
(standard wireless protocol)
(standard wireless protocol)
Operating frequency
Operating frequency
U. S. A., Canada, Taiwan
U. S. A., Canada, Taiwan
: 2,412MHz–2,462MHz
: 2,412MHz–2,462MHz
(11 channels)
(11 channels)
Other countries
Other countries
: 2,412MHz–2,472MHz
: 2,412MHz–2,472MHz
(13 channels)
(13 channels)
Access protocols
Access protocols
Infrastructure
Infrastructure
126
Speci cations
NP-W126 rechargeable battery
Nominal voltage
Nominal voltage
7.2 V DC
7.2 V DC
Nominal capacity
Nominal capacity
1,260 mAh
1,260 mAh
Operating temperature
Operating temperature
0 °C to +40 °C/+32 °F to +104 °F
0 °C to +40 °C/+32 °F to +104 °F
Dimensions
Dimensions
(W × H × D)
(W × H × D)
36.4 mm × 47.1 mm × 15.7 mm/1.4 in. × 1.8 in. × 0.6 in.
36.4 mm × 47.1 mm × 15.7 mm/1.4 in. × 1.8 in. × 0.6 in.
Weight
Weight
Approx. 47 g/1.7 oz.
Approx. 47 g/1.7 oz.
BC-W126 battery charger
Rated input
Rated input
100 V 240 V AC, 50/60 Hz
100 V – 240 V AC, 50/60 Hz
Input capacity
Input capacity
13 –21 VA
13 –21 VA
Rated output
Rated output
8.4 V DC, 0.6 A
8.4 V DC, 0.6 A
Supported batteries
Supported batteries
NP-W126 rechargeable batteries
NP-W126 rechargeable batteries
Charging time
Charging time
Approx. 150 minutes (+20 °C/+68 °F)
Approx. 150 minutes (+20 °C/+68 °F)
Operating temperature
Operating temperature
5 °C to +40 °C/+41 °F to +104 °F
5 °C to +40 °C/+41 °F to +104 °F
Dimensions
Dimensions
(W × H × D)
(W × H × D)
65 mm × 91.5 mm × 28 mm/2.5 in. × 3.6 in. × 1.1 in., excluding projections
65 mm × 91.5 mm × 28 mm/2.5 in. × 3.6 in. × 1.1 in., excluding projections
Weight
Weight
Approx. 77 g/2.7 oz., excluding battery
Approx. 77 g/2.7 oz., excluding battery
Weight and dimensions vary with the country or region of sale. Labels, menus, and other displays may di er from those on the
actual camera.
127
Appendix
Speci cations
Notices
Notices
• Speci cations subject to change without notice; for the latest information, visit http://www.fujifilm.com/products/
digital_cameras/index.html. FUJIFILM shall not be held liable for damages resulting from errors in this manual.
Although the LCD monitor is manufactured using advanced high-precision technology, small bright points and
anomalous colors may appear, particularly in the vicinity of text. This is normal for this type of LCD display and
does not indicate a malfunction; images recorded with the camera are una ected.
• Digital cameras may malfunction when exposed to strong radio interference (e.g., electric  elds, static electricity,
or line noise).
Due to the type of lens used, some distortion may occur at the periphery of images. This is normal.
128
Restrictions on Camera Settings
Restrictions on Camera Settings
The options available in each shooting mode are listed below.
S
S
B
B
Adv.
Adv.
P
P
S
S
A
A
M
M
N
N
M
M
h
h
SP
SP
Y
Y
j
j
Z
Z
O
O
H
H
p
p
Q
Q
R
R
s
s
U
U
V
V
W
W
Focus frame selection
Focus frame selection
WB
WB
I
I
J
J
O
O
O
O
W
W
X
X
Y
Y
F
F
OFF
OFF
F
F
129
Appendix
Restrictions on Camera Settings
S
S
B
B
Adv.
Adv.
P
P
S
S
A
A
M
M
N
N
M
M
h
h
SP
SP
Y
Y
j
j
Z
Z
O
O
H
H
p
p
Q
Q
R
R
s
s
U
U
V
V
W
W
N
N
AUTO
AUTO
H (25600)
H (25600)
H (12800)
H (12800)
6400
6400
5000
5000
4000
4000
3200
3200
2500
2500
2000
2000
1600
1600
1250
1250
1000
1000
800
800
640
640
500
500
400
400
320
320
250
250
200
200
L (100)
L (100)
O
O
O
O
P
P
Q
Q
T
T
FINE
FINE
NORMAL
NORMAL
FINE+RAW
FINE+RAW
NORMAL+RAW
NORMAL+RAW
RAW
RAW
130
Restrictions on Camera Settings
S
S
B
B
Adv.
Adv.
P
P
S
S
A
A
M
M
N
N
M
M
h
h
SP
SP
Y
Y
j
j
Z
Z
O
O
H
H
p
p
Q
Q
R
R
s
s
U
U
V
V
W
W
U
U
AUTO
AUTO
A
A
B
B
C
C
P
P
c
c
d
d
e
e
b
b
f
f
B
B
f
f
q
q
r
r
s
s
h
h
K
K
L
L
L
L
l
l
M
M
m
m
OFF
OFF
C
C
o
o
p
p
q
q
b
b
OFF
OFF
ON
ON
F
F
p
p
s
s
t
t
u
u
x
x
131
Appendix
Restrictions on Camera Settings
S
S
B
B
Adv.
Adv.
P
P
S
S
A
A
M
M
N
N
M
M
h
h
SP
SP
Y
Y
j
j
Z
Z
O
O
H
H
p
p
Q
Q
R
R
s
s
U
U
V
V
W
W
c
c
STANDARD
STANDARD
FOCUS PEAK
FOCUS PEAK
HIGHLIGHT
HIGHLIGHT
p
p
B
B
OFF
OFF
AUTO
AUTO
N
N
O
O
l
l
D
D
P
P
B
B
ON
ON
K
K
L
L
M
M
d
d
D
D
P
P
B
B
OFF
OFF
ON
ON
1
1
Fixed at
Fixed at
OFF
OFF
.
.
2
2
Fixed at
Fixed at
ON
ON
.
.
3
3
Changes automatically depending on mode.
Changes automatically depending on mode.
4
4
Not available in
Not available in
J
J
HIGH KEY
HIGH KEY
,
,
Z
Z
LOW KEY
LOW KEY
, or
, or
K
K
DYNAMIC TONE
DYNAMIC TONE
mode.
mode.
5
5
Compatible lenses only.
Compatible lenses only.
7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN
http://www.fujifilm.com/products/digital_cameras/index.html
128


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujifilm X-A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujifilm X-A1 in the language / languages: English as an attachment in your email.

The manual is 2,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fujifilm X-A1

Fujifilm X-A1 User Manual - German - 148 pages

Fujifilm X-A1 User Manual - Dutch - 148 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info