288592
54
Zoom out
Zoom in
Previous page
1/67
Next page
107
6
CAMERA CUSTOMIZING
106
DISCONNECTING FROM THE PC
Download “FinePix4800Customizer” software
from “http://home.fujifilm.com/products/digital/”.
Install the software in “DSCSETUP” folder in
the “FinePixViewer” folder on your PC.
Load a SmartMedia that has available space and
connect the camera (DSC mode) with the PC.
Use the FinePixViewer on the PC and transfer
the customizing data to the camera.
Disconnect the cradle from the PC and remove
the camera (P.106).
When you switch the camera on, the
customized screen appears.
Press “ c” to check the details.
Press the “MENU/OK” button to proceed.
1 2
Do not switch the SmartMedia during the
customization procedure.
!
If you selected “NO”, the customized screen appears
the next time you switch the camera on.
The figure shows
the Macintosh
screen display.
Card reader connection
Check that the self-timer lamp is not blinking
(the camera is no longer communicating with
your PC).
Select the correct procedure below for the
operating system used on your computer.
Windows 98
Check that the power lamp on the cradle is lit
steadily.
Windows Me/2000 Professional
Exit “FinePixViewer”. Then click the Eject icon in
the taskbar and eject the media. Check that the
"REMOVE OK" message is displayed.
Macintosh
Quit “FinePixViewer”. Drag the removable disk
drive icon on the desktop to the Trash and then
check that the power lamp on the cradle is blinking
slowly.
Press the “<” (power) button on the cradle
and then disconnect the cradle / camera from
the PC.
Remove the camera from the cradle.
Close the connection socket cover on the
bottom of the camera.
Always follow the procedure below before
disconnecting the camera from your PC.
PC-camera connection
You must exit “FinePixViewer”.
Check that the self-timer lamp is not blinking
(the camera is no longer communicating with
your PC).
Press the “<” (power) button on the cradle to
turn it off, and then disconnect the cradle /
camera from the PC.
Remove the camera from the cradle.
Close the connection socket cover on the
bottom of the camera.
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujifilm finepix4800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujifilm finepix4800 in the language / languages: English as an attachment in your email.

The manual is 3,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info