288592
12
Zoom out
Zoom in
Previous page
1/67
Next page
23
1
SETTING THE DATE AND TIME
22
SWITCHING ON AND OFF
Press the “MENU/OK” button to display the
menu screen.
Use “d”, “c”, “a or “b to select “SET–UP”
from the “QOPTION” menu.
Press the “MENU/OK” button.
The “SET–UP” screen appears.
Use “a” or “b” to select “DATE/TIME”.
Press “c”.
!
See P.92 for more information on the “QOPTION”
menu.
!
If at least 3 hours have passed since the AC power
adapter was connected or the battery inserted and
date and time set, then those settings will be
maintained for roughly 1 hour even when the camera
has no power supply (when the AC power adapter is
disconnected and the battery is removed).
If the date was cleared and you selected “SET
DATE/TIME”, proceed from step (P.24).
3
2
Blank
LCD Monitor Display Panel
Blinking red
Lit red Flashing
Lit white
Press the “< ” (power) button to switch the
camera on and off. When you switch the camera
on, the viewfinder lamp lights (green).
If the date has been cleared, a confirmation
message appears. To set the date, press the
“MENU/OK” button (P.24).
1
Auto Power Save Function
You can check the remaining battery charge on
the LCD monitor by pressing the “DISP” button
to switch the LCD monitor on.
Battery has ample charge. (No indicator
displayed.)
The battery is approximately half charged.
Battery charge low. Replace or recharge the
battery as it will run out shortly.
The battery is exhausted. The display will
shortly go blank and the camera will stop
working. Replace or recharge the battery.
!
The display panel icons
and
are only shown for
2 seconds when the camera is switched on.
2
!
If you switch the camera on when the Mode switch is
set to “
1”, the lens cover opens and the lens moves
out. For this reason, take care to avoid touching the
lens when you switch the camera on.
1
When this function is enabled, the LCD monitor
switches off to conserve battery power if the camera
is not used in any way for 30 seconds (See P.98 for
details)
.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujifilm finepix4800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujifilm finepix4800 in the language / languages: English as an attachment in your email.

The manual is 3,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info