101614
46
Zoom out
Zoom in
Previous page
1/61
Next page
90 91
Viewing Images
6
5
1Press “a” or “b” to select “u PRINT DPOF”.
2Press “c”.
!
When [u NOT SET DPOF] appears, the DPOF settings are
not specified.
!
To use DPOF printing, the DPOF settings must be specified
on FinePix Z2 beforehand (P.55, 57).
!
Even when “WITH DATE” is specified in the DPOF settings,
the date is not inserted on printers that do not support date
printing.
PRINT WITH DATEP R I N T W I T H DAT E
PRINT WITHOUT DATEP R I N T W I T H O UT DAT E
PRINT DPOFP R I N T D P O F
OKO K
PICTBRIDGEP I C T B R I D G E
01 02
6
u PRINT DPOF OK?” appears on the LCD
monitor.
Press the “MENU/OK” button to download the data
to the printer and print the frames specified in the
DPOF settings.
!
Press the “DISP/BACK” button to cancel the printing.
Depending on the printer, the printing may not be canceled
immediately or printing may stop midway through. When
printing stops midway, briefly turn the camera off and then on
again.
4
“CHECKING USB” appears and then the menu is
displayed on the LCD monitor.
!
If the menu does not appear, check whether the “ò” USB
MODE setting is “
®” PICTBRIDGE.
!
Depending on the printer, some functions are disabled.
CHECKING USBCH E C K I N G U S B
PICTBRIDGEPIC TB RI D G E
When a printer that supports PictBridge is available, images can be printed
by connecting the camera directly to the PictBridge-compatible printer
without a PC.
!
In PictBridge function, images photographed on other than a camera may not be printed.
6.2.1
Specifying images for printing on the camera
1Press the “w” button for about 1 second to turn
the camera on in Playback mode.
2Select “®” PICTBRIDGE in “ò” USB MODE
in the “˜” SET-UP menu (P.78).
3Turn the camera off.
!
Do not connect to a PC when the “ò” USB MODE setting is
set to “
®” PICTBRIDGE. See P.108 if you connect to a PC
by mistake.
1
PICTBRIDGEP I C T B R I D G E
ENGLISHE N G L I S H
SETS E T
NTSCNTS C
1
3
2
OKOK
01
02
6.2
CONNECTING THE CAMERA DIRECTLY TO THE PRINTER
PictBridge FUNCTION
2
1Connect the cradle to the printer using the USB
cable (mini-B).
2Plug the AC power adapter connector into the
“DC IN 5V” socket on the cradle and then plug
the AC power adapter into the power outlet.
3Set the camera in the cradle.
4Turn the printer on.
!
Plug the camera securely and vertically into the cradle
connecting plug.
!
The camera cannot be used to specify printer settings such
as the paper size and print quality.
!
Use an xD-Picture Card that was formatted on FinePix Z2.
Press the “POWER” button on the cradle.
3
SHEETSS H E E T S
P R INI N T INGI N G
CANCELC A N C E L
11119191919
01 02
3
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujifilm Finepix Z2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujifilm Finepix Z2 in the language / languages: English as an attachment in your email.

The manual is 5,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info