41373
37
Zoom out
Zoom in
Previous page
1/83
Next page
72 73
Advanced Features
3
4
MODE SELECT
F
ISO
AUTO
External flash settings (for flashes
with automatic flash control)
For external flash, refer to the user’s manual for the
flash and specify the settings as described below.
h Select external flash mode (TTL mode cannot be
used).
h Match the settings to the camera aperture setting.
Set the flash for the aperture setting measured by
the camera.
h Match the sensitivity setting ( P.61) to the
setting on the camera.
!
After taking the picture, check the color (white balance)
setting for the image.
i Set “IMAGE DISP.” to “1.5 SEC”, “3 SEC” or “CONT” in the
SET-UP menu (P.101).
i Set the Power switch to “
w” (P.31).
Click
Hold a sheet of white paper so that it fills the entire
screen.
When pressing the shutter button, the flash fires
and the white balance is set.
When the white balance is incorrect
Adjust the white balance to match the external flash.
In “»” WHITE BALANCE in the photography menu
(P.66), select “O, P” custom white balance.
Press the “MENU/OK” button.
CUSTOMCU STO M
1
1
2
AUTOAU TO
SETSE T
AUTOA U T O
OFFOFF
0
OFFOFF
:
:
:
:
:
:
When [OVER] or [UNDER] appears, the white
balance was not measured at the correct exposure.
Set the exposure compensation again, using a
negative value (–) when [OVER] appears and a
positive value (+) when [UNDER] appears.
OVEROV ER
ISO
200
IS O
200
ISO
200
66
NNN
or
OVEROV ER UNDERU NDER
72
PHOTOGRAPHY MENU
PHOTOGRAPHY MENU
Displaying the menus (P.63)
Select “ON” in this setting when using an external
flash unit. Synchronized shutter speeds up to
1/1000 sec. can be used.
!
The image may appear dark when the shutter speed is set to
speeds higher than 1/1000 sec.
!
Set the white balance (P.66) to “AUTO” or custom white
balance (P.73).
EXTERNAL FLASHEXT ERNA L FL ASH
1
2
EVE V
OFFOFF
OFFOFF
OFFOFF
ONON
STDSTD
STDSTD
STDSTD
1
3
:
:
:
:
:
:
1
Hot shoe
1Close the built-in flash.
2Mount the external flash on the camera’s hot
shoe and tighten the locking screw.
!
If you pop up the built-in flash when the external flash is set
to “ON”, the built-in flash fires once as a signal for the
external flash to fire. The hot shoe and the Synchronizing
terminal do not make a signal for flash.
2
01
02
Ordinary external flash units can be used.
However, some camera-specific flash units cannot
be used.
Ê
USING AN EXTERNAL FLASH
Available Photography modes: N, M, <, >
Using a Synchronizing terminal
Attach the synchronization cord from the external
flash to the Synchronizing terminal on the camera by
pushing the cord into the terminal securely.
Synchronization
cord
Synchronizing terminal
Synchronizing
terminal cap
Compatible Flash Units
Flash units that can be used with this camera must meet the following 3 conditions:
hThe aperture can be set.
hExternal flash synchronization can be used.
hThe sensitivity can be set.
3
The mode can be set to “N”, “M”, “<” (P.41, 42,
43) or “>” (P.44), but the use of “<” or “>” is
better.
!
Flash photography cannot be used when Top 4-frame
continuous shooting (P.54) or auto bracketing (P.54) is
selected.
Illustration is display of the external flash
(commercial available).
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujifilm Finepix S9100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujifilm Finepix S9100 in the language / languages: English as an attachment in your email.

The manual is 7,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fujifilm Finepix S9100

Fujifilm Finepix S9100 User Manual - German - 143 pages

Fujifilm Finepix S9100 User Manual - Dutch - 143 pages

Fujifilm Finepix S9100 User Manual - French - 143 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info