287617

Fujifilm finepix s602 Manual

76
Zoom out
Zoom in
Previous page
1/92
Next page
76
CONNECTING AT DSC MODE
1
2
ＳＥＴ−ＵＰＳＥＴ−ＵＰ
ＵＳＢ ＭＯＤＥＵＳＢ ＭＯＤＥ
ＤＡＴＥ／ＴＩＭＥＤＡＴＥ／ＴＩＭＥ
ＲＥＳＥＴ ＡＬＬＲＥＳＥＴ ＡＬＬ
ＥＮＧＬＩＳＨＥＮＧＬＩＳＨ
ＬＡＮＧＵＡＧＥＬＡＮＧＵＡＧＥ
ＰＲＩＭＡＲＹ ＭＥＤＩＡＰＲＩＭＡＲＹ ＭＥＤＩＡ
ＳＯＵＮＤＳＯＵＮＤ
ＬＯＷＬＯＷ
ＳＥＴＳＥＴ
ＤＳＣＤＳＣ
ＯＫＯＫ
0201
1Load the media containing your shots into the
camera.
2Set the Mode dial to “~” and then set the
Power switch to “q”.
3Select “DSC” in “USB MODE” in the SET–UP
menu (➡P.68) and then switch the camera off.
●
!
It is recommended that you connect the AC Power
Adapter AC-5VH/AC-5VHS (sold separately) (➡P.74).
Constant power supply will prevent successful data
transfer from trouble caused by power supply.
●
!
If you load a SmartMedia and a Microdrive into the
camera at the same time, images will be recorded onto
the media selected as the “Priority media” (➡P.68).
1Switch your PC on.
2Connect the special USB cable to the camera
and the computer.
3Switch the camera on.
Always use the prescribed procedure when
disconnecting or switching off the camera (➡P.78).
●
!
On Windows XP and Mac OS X, automatic launch settings must be specified the first time you connect the
camera to your computer (➡Software Quick Start Guide booklet).
●
!
Ensure that you plug each end of the special USB cable into the correct socket and that the plugs are firmly
inserted all the way into the connection sockets.
If you are using a Windows PC, the driver settings are specified automatically when installation
is completed. No further action is required.
✽ If your PC fails to recognize the camera, refer to the Software Quick Start Guide.
03
AC-5V(optional)
(USB)
socket
(USB)
socket
USB
socket
PC
Camera Operations
PC Operations
h When the camera and the computer are
exchanging data, the indicator lamp flashes
alternately green and orange.
h “DSC” is displayed on the screen.
h Auto Power Off is disabled when the
camera is connected to a USB port.
●
!
When replacing the media, always switch the camera
and computer off first using the procedure described
on P.78.
●
!
Do not disconnect the USB cable when the camera is
communicating with the PC. See P.78 for information
on the disconnection procedure.
h FinePixViewer automatically starts up.
h A removable disk icon appears and you
can use your PC to transfer files to and
from the camera.
✽ Screen for
Windows 98 SE
Windows Macintosh
If the above operations do not occur, you do
not have the required software programs or
drivers installed on your PC. Refer to the
Software Quick Start Guide booklet and
complete the required PC setup procedures.
Then reconnect the camera to your PC.
… 76 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujifilm finepix s602 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujifilm finepix s602 in the language / languages: English as an attachment in your email.

The manual is 3,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fujifilm finepix s602

Fujifilm finepix s602 User Manual - Dutch - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info