101589
19
Zoom out
Zoom in
Previous page
1/51
Next page
37
Advanced Features
3
36
SELF−TIMER
OFF
ON
01 02
N   16
3
When you enable the setting, an icon appears in
the top-left corner of the screen.
!
The settings available in the menu screen vary depending on
the Photography mode.
Press the “MENU/OK” button to display the menu
on the screen.
1
1Press “d” or “c” to select the menu item and
a” or “b” to change the setting.
2Press the “MENU/OK” button to confirm the
setting.
2
PHOTOGRAPHY MENU OPERATION
PHOTOGRAPHY MENU
*
Self-timer P.39
Use this setting for taking pictures such as
group shots where the photographer is included
in the shot.
A
White balance P.42
Change this setting to take a picture with the
white balance fixed for the surroundings and
lighting when the picture is taken.
Aperture-priority P.42
This is an automatic mode to set the aperture.
Use this mode for shots that have the
background out of focus (large aperture) or
have both near and far objects in focus (small
aperture).
Scene position P.40
Specify “m” Portrait, “,” Landscape, “.
Sport or “©” Night.
D
EV P.41
Set when the correct exposure cannot be
obtained.
y
Quality P.38
Set the size of the recorded image when the
picture is taken. The size set is matched to the
intended use of the print size.
G
Sharpness P.42
Use this setting to soften or emphasize outlines
or to adjust the quality of the image.
z
Flash brightness adjustment
P.41
Change this setting to adjust the amount of light
emitted by the flash to suit the photography
conditions or to achieve a desired effect.
INCREASING MONITOR BRIGHTNESS
PHOTOGRAPHY FUNCTIONS
This is useful when checking the shot composition for dimly lit scenes (Slow synchro shots, etc.).
1
Set the Power switch to “q”.
2
Set the Mode dial to “B”, “m” or “s” mode.
Press the “” Low Light Viewfinder button.
” appears on the screen and the subject is
displayed brightly.
To cancel increased brightness:
Press the “” Low Light Viewfinder button again.
This function is automatically cancelled after each
shot.
!
This function is purely for checking the composition of your
shot. It does not increase the brightness of the photographed
image.
!
Even if you increase the brightness in dark locations, you
may not see the subject.
!
To maintain the monitor brightness, specify the desired
setting in the “
EVF/LCD” (LCD monitor brightness)
adjustment in the settings menu. The adjustment is retained
even after taking pictures or turning camera off. (See P.58 for
details.)
3
UP
   16
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujifilm Finepix S3100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujifilm Finepix S3100 in the language / languages: English as an attachment in your email.

The manual is 4,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info