510440
59
Zoom out
Zoom in
Previous page
1/73
Next page
Drag the “Removable drive” icon on the desktop to the
Trash.
!
When you drag the icon to the Trash, “REMOVE OK” appears on
the camera’s screen.
DC IN 5V
socket
USB
socket
(mini-B)
116 117
Connection
6
CONNECTING THE CAMERA DIRECTLY TO THE PRINTER
PictBridge FUNCTION
When a printer that supports PictBridge is available, images can be printed by connecting the
camera directly to the PictBridge-compatible printer without using a PC.
!
In PictBridge function, images photographed on other than a camera may not be printed.
!
Always turn the camera off when disconnecting or connecting the USB cable. Connecting the camera to the printer while
the camera is turned on could damage the media.
Specifying images for printing on the camera
SET−UPSET−UP
21
3
4 5
DATE/TIME       :SETDATE/TIME       :SET
USB MODE        USB MODE        
1394 MODE       :1394 MODE       :
BEEP         :LOWBEEP         :LOW
SETSET
CANCELCANCEL
DC IN 5V socket
USB
socket
(mini-B)
2
1Set the Power switch to “ON”.
2Select “$” in “USB MODE” in the “SET-UP”
menu (P.101).
3Set the Power switch to “OFF” to turn the
camera off.
!
Do not connect to a PC when the USB mode setting is set to
$”. See P.137 if you connect to a PC by mistake.
1
1Connect the camera to the printer using the USB
cable (mini-B).
2Turn the printer on.
4
$ CHECKING USB” appears on the rear
display panel for a few moments and then the
menu screen appears on the LCD monitor.
!
If the menu does not appear, check whether the USB mode
setting is
$”.
!
Depending on the printer, some functions are disabled.
!
The camera cannot be used to specify printer settings such
as the paper size and print quality.
!
Please connect the AC Power Adapter AC-5VX (sold
separately) to your camera.
!
Use a media that was formatted on the camera.
Set the Power switch to “ON”.
3
01 033
02
CONNECTING TO A COMPUTER
1
OFF
Quit all applications (FinePixViewer etc.) that are using the camera.
Check that the access lamp is off (no data is being
exchanged with the computer).
2
Perform the steps shown below before you turn the camera off. This procedure differs
depending on the operating system software (or PC) you are using.
!
In some cases, the camera and computer may still be
communicating even after the “Copying” message disappears
from the computer screen. Always check that the access
lamp is off.
Disconnecting the camera
2Left-click the Eject icon in the taskbar and select “USB Disk”.
3The menu option shown below appears. Click on this option.
4The “Safe To Remove Hardware” message box appears. Click the [OK] button or the close
button.
Screen for Windows XP
Screen for Windows XP
Macintosh
3
1Turn the camera off.
2Unplug the USB cable (mini-B) or IEEE 1394
cable from the camera.
01 02
Windows 98/98 SE (USB)
No PC operation is needed.
Windows 98 SE (IEEE 1394) /Me/2000 Professional/XP
1Right-click the removable disk icon in the “My Computer”
window and select Eject. This step is only required in
Windows Me.
Continued
CHECKING USB
CHECKING USB
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujifilm Finepix S3 Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujifilm Finepix S3 Pro in the language / languages: English as an attachment in your email.

The manual is 6,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info