510440
53
Zoom out
Zoom in
Previous page
1/73
Next page
104 105
Settings
5
SET-UP
SETTING THE CUSTOM WB
COLOR SPACES
Use this function to set the correct white balance for a light source. You can also use this
function to achieve a desired special effect.
Press the “F1” (custom WB 1) button or the “F4” (custom WB 2) button to select the custom
white balance you want to set.
1
2
WB
CUS.2
Custom WB 1 Custom WB 2
Turn the focus mode selector switch to “M” (Manual
focus) and set the focus manually.
3
4
Set the exposure mode to “P”, “S” or “A”.
!
The camera’s auto focus function may be unable to focus on
a subject such as a white sheet of paper, which will prevent
the shutter from operating.
!
While a custom white balance can also be measured in “M
mode, the image may be extremely overexposed or
underexposed so that the optimum measurement is not
taken.
Hold up a page of white paper or a similar object
under the target light source so that the paper
fills the viewfinder screen. Then press the shutter
button to set the custom white balance.
h Range of custom WB settings
Color temperatures from approx. 2800 K to
9500 K
5
If the exposure is measured correctly,
7” appears on the LCD monitor.
Press the “MENU/OK” button to confirm the setting.
Selects the color space used when pictures are
taken. For normal photography, select sRGB.
Adobe RGB (1998) is best for images to be used
for commercial printing.
WIDE: Allows photography using a wide dynamic
range that takes advantage of the particular
characteristics of the Super CCD SR II. The
continuous shooting speed and interval are
slower than for standard mode (roughly
double), so the number of continuous shots
available roughly half.
STANDARD: The dynamic range is 100%, as on
the previous digital camera (FinePix
S2 Pro), but the continuous shooting
speed and the number of continuous
shots available are increased for
easier shooting.
!
After taking the picture, check the color tones (white balance)
in the image.
i Select “PREVIEW” as the photographed image display
option (P.103) in the SET-UP screen.
i Press the “PLAY” button (P.43).
When you have finished setting the white balance, select the
focus mode you want to use.
When the exposure is not measured correctly
Remedy
The subject is too bright. Use a negative (–) exposure compensation value and set the
white balance again.
The subject is too dark. Use a positive (+) exposure compensation value and set the white
balance again.
Because the exposure is outside the range of valid custom white balance settings, the
maximum (or minimum) value has been set.
h Available custom WB settings: Color temperatures of approx. 2800 K to 9500 K
COMPLETED !COMPLETED !
SETSET
CANCELCANCEL
SET−UPSET−UP
2
1
3
4 5
CUSTOM WB       :SET
CUSTOM WB       :SET
COLOR SPACES     sRGBCOLOR SPACES     sRGB
D−RANGE         :WIDED−RANGE         :WIDE
IMAGE DISP.     :OFFIMAGE DISP.     :OFF
SETSET
CANCELCANCEL
D-RANGE
SET−UPSET−UP
2
1
3
4 5
CUSTOM WB       :SET
CUSTOM WB       :SET
COLOR SPACES    :sRGBCOLOR SPACES    :sRGB
D−RANGE          WIDED−RANGE          WIDE
IMAGE DISP.     :OFFIMAGE DISP.     :OFF
SETSET
CANCELCANCEL
Matching customized white balance using an external flash
If you use an external flash with the exposure mode set to “M”, you can make it easier to match the
white balance to the photography settings (aperture, flash brightness, etc.) by using a commercially
available 18% grey standard chart instead of white paper.
How to display the SET-UP menu (P.101)
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujifilm Finepix S3 Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujifilm Finepix S3 Pro in the language / languages: English as an attachment in your email.

The manual is 6,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info