510440
37
Zoom out
Zoom in
Previous page
1/73
Next page
72 73
Advanced Photography
3
FLASH EXPOSURE COMPENSATION
FLASH PHOTOGRAPHY
Flash exposure compensation lets you intentionally change the correct exposure computed by the
flash and the camera. For example, you can highlight the main subject by increasing the flash output
or prevent the main subject from becoming too bright by decreasing the flash output.
1
1Hold down the “n” button.
2Turn the Main-command dial to set the amount
of compensation.
The “f” icon appears on the top display panel
and on the viewfinder.
Compensation range: –3 EV to +1 EV in 1/2 EV
increments
Compensation guide: Select + settings when the
background is brighter than
the subject and – settings
when background is darker.
2
The remainder of the procedure is the same as for normal flash photography (P.70).
Press the “
n” button.
To check the amount of compensation
h Set the compensation amount back to “0.0”.
!
Turning the camera off does not cancel flash exposure compensation.
To cancel exposure compensation
Sample flash exposure compensation displays
Compensation amount
“0.0”
Top display panel Viewfinder display
“+0.5”
“–0.5”
01
02
LENSES THAT CAN BE USED WITH THE BUILT-IN FLASH
FLASH PHOTOGRAPHY
Usable lenses with built-in flash
h 20 mm to 300 mm CPU lenses can be used with the built-in flash.
h To prevent vignetting, remove the lens hood when using the flash.
h The built-in flash cannot be used at shooting distance less than 0.6 m (2.0 ft.).
h Zoom lenses with a macro feature cannot be used in the macro range.
h Vignetting occurs at the edges of the frame resulting in underexposure with the following zoom
lenses, which have limitations in usable focal length or shooting distance:
Notes on using the built-in flash
h When the built-in flash is used, continuous shooting is not available even when the release mode
is set to “.” (continuous shooting).
h If the built-in flash is charging, camera-shake correction is not performed on a VR lens while the
shutter button is pressed down halfway.
Lens
AF-S 17-35 mm f/2.8 ED 24 mm focal length at 0.8 m (2.6 ft.) or longer shooting distance
AF 20-35 mm f/2.8 20 mm focal length at 1 m (3.3 ft.) or longer shooting distance
AF 28-70 mm f/2.8 ED
28 mm focal length at 2 m (6.6 ft.) or longer shooting distance or 35 mm focal
length at 0.7 m (2.3 ft.) or longer shooting distance
Limitations
20 mm to 200 mm non-CPU Nikkor lenses (AI-S, AI, AI-modified Nikkor) and Series-E lenses can be used with the built-in
Flash. However following lenses have limitations in usable focal length or shooting distance:
Ai’d. 50-300mm f/4.5 (can be used at 200mm), Ai 50-300mm f/4.5 (can be used at 200mm), Ai’d. 85-250mm f/4 (can be
used at 135mm and above), Ai ED 50-300mm f/4.5 (can be used at 135mm and above), Ai-S ED 50-300mm f/4.5 (can be
used at 135mm and above)
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujifilm Finepix S3 Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujifilm Finepix S3 Pro in the language / languages: English as an attachment in your email.

The manual is 6,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info