510440
27
Zoom out
Zoom in
Previous page
1/73
Next page
52 53
Advanced Photography
3
PREVIEW
PREVIEW
F1 F2 F3 F4
This is a photography technique that allows you overlay photographed images on top of each other.
You can use this technique to compose shots that cannot be obtained normally.
1
Hold down the release mode switch unlock button
and set the release mode switch to “p” (multiple
exposure). When you select multiple exposure
mode, the “p” icon appears in the viewfinder
display.
2
According to the photography conditions, hold
down the “b” (exposure compensation) button 1
as you turn the Main-command dial 2 to set the
exposure offset.
Standard compensation value in Multiple exposure
In multiple exposure, a number of images are shot in the same frame. When you are overlaying
backgrounds and subjects, you must set the appropriate exposure offset before taking any shots.
h Test shooting is recommended since the
compensation actually required varies depending
on the shooting situation.
h When the background is completely dark and
subjects do not overlap, no compensation is
necessary for each shot.
General guide to exposure offsets
Number of exposures
2
3
4
01
02
01
3
1When you compose, focus and take the shot, a
preview image appears on the LCD monitor.
2Press the “F2” button to move on to the next
shot.
h A preview image is always displayed, regardless
of the “PREVIEW” setting selected in SET-UP.
h If you change the release mode before multiple
exposure shooting is completed, no images are
recorded.
02
4
When you take the next (multiple exposure) shot, a
preview appears showing the overlaid images.
h To record the image:
Press the “F1” or “MENU/OK” button.
h To take another multiple exposure shot:
Press the “F2” button.
h To take the shot again without using multiple
exposure mode:
Press the shutter button again.
h To cancel multiple exposure mode without
recording the shots:
Press the “F3” or “BACK” button.
h To check the brightness distribution:
Press the “F4” button.
CSM 11: In multiple exposure mode, one shot is taken in the frame each time the shutter button is
pressed, but continuous shooting can also be used (P.111). Images in continuous
shooting are overlapped in the preview display. Use the “F1”, “F3” and “F4” buttons. “
K
cannot be selected in continuous shooting.
!
Multiple exposures cannot be used when only 1 frame is shot in continuous shooting.
!
You cannot use the built-in flash for continuous shutter release.
!
See P.50 for the max. no. of consecutive shots in multiple exposure shooting.
The settings for multiple exposure shooting can
only be changed from the function menu. At this
point, the last settings specified apply.
Compensation value
p MULTIPLE EXPOSURE
RELEASE MODES
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujifilm Finepix S3 Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujifilm Finepix S3 Pro in the language / languages: English as an attachment in your email.

The manual is 6,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info