510440
16
Zoom out
Zoom in
Previous page
1/73
Next page
30 31
Basic Photography
2
xRelease mode
switch unlock
button
Hold down this button
to move the release
mode switch.
xExposure mode dial
Allows you to select the exposure
mode, the custom settings and
the ISO setting,
: Programmed Auto
: Shutter-priority Auto
  : Aperture-priority Auto
  : Manual
: Custom settings
: ISO setting (sensitivity)
xRelease mode switch
Selects Single-frame, Continuous, Self-timer or Multi
Exposure as the shutter release mode.
xLens release button
Hold down this button as
you remove the lens.
xPower switch
Turns the camera on
and off.
xFocus mode selector switch
Selects AF-S (Single-AF servo), AF-C
(Continuous-AF servo) or M (Manual)
as the focus mode.
xRemote release socket
Used to connect a 10-pin
remote release.
xFlash pop-up button
To use the built-in flash, press
this button to pop-up the flash.
xSynchronizing terminal
Use this to connect flash units
that require a synchro cord.
xTop display panel
Displays the information
shown in the viewfinder
along with other information.
xMain command dial
Changes settings such as the
shutter speed.
xAccessory shoe
Mount an external flash here.
xDepth of field check
button
This button allows you to
check the depth of field.
xShutter button
Press this button down halfway to
restore the camera to
Photography mode. Press down
fully to take a picture.
xSub-command dial
Changes the aperture and other
settings.
xDiopter adjustment knob
Makes the image in the viewfinder easier to see.
Set this knob to the position where the focusing
area appears sharpest.
xFlash exposure
compensation button
Used with the Main-command dial
to select the flash exposure
compensation value.
xAuto exposure bracketing button
Used with the camera dials to select Auto Exposure Bracketing.
Main-command dial: Turns Auto Exposure Bracketing ON and OFF.
Sub-command dial: Selects a combination of exposure offset and number of shots.
xSynchro mode button
Used with the Main-command
dial to select Synchro mode.
xMetering system selector dial
Selects Multi, Center-weighted or Spot
as the metering system.
xAE-L / AF-L button
Locks the exposure and focus while
pressed.
xLCD illuminator button
Illuminates the display panel.
xExposure compensation
button
Used with the Main-command
dial to select the exposure
compensation value.
BASIC OPERATION GUIDE
2
Basic
Photography
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujifilm Finepix S3 Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujifilm Finepix S3 Pro in the language / languages: English as an attachment in your email.

The manual is 6,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info